Clyxgs Momentary Push Button Switch, SPST Normal Open NO Switch 2 Pin Mini Micro 1A 250V AC Red Cap 30 PCS
Product ID: 97948909
📏6.9mm Diameter
🔌1A 250V AC
🔴Red Cap
Buy anything from 5,000+ international stores. One checkout price. No surprise fees. Join 2M+ shoppers on Desertcart.
Desertcart purchases this item on your behalf and handles shipping, customs, and support to British Virgin Islands.
🔴 Push the Limits of Your Projects!
The Clyxgs Momentary Push Button Switch is a high-quality, SPST Normal Open switch designed for a variety of applications. With a compact size of 6.9mm in diameter and a vibrant red cap, this switch is perfect for both industrial control circuits and DIY electronic projects. Rated for 1A at 250V AC, it comes in a convenient pack of 30, ensuring you have plenty on hand for all your needs.
R**N
Sketchy contacts (normal for this type of switch) so only for circuits that can tolerate that
These are a bit higher in quality then the Radio Shack of yrs ago BUT still the contact is not good with any of these types of pushbutton switches (in my experience). The pushbutton has a shaft attached inside with a washer mounted to its end. When the button is pressed the washer inside makes contact with the two pin, shorting them. This contact is poor and causes multiple electronic on/off closures during each press. Would only be good for circuits that can tolerate that.I needed this button size for my project so I cut the original switch off the back of the button assembly, shrink tubed a mini tactile switch in place of the original contacts and it worked out fine.
B**E
Quick delivery and did the job
I'm a HAM radio operator and used this to replace a broken PTT switch in a hand MIC. It was a tight fit space wise but I was able to make it work. Drilled a hole in the original PTT lever, installed this switch, removed the original switch, and connected the wires to the poles of this switch.
G**Y
They're perfect for my needs
I used these buttons to add thumb buttons to my GRS Tron Joystick. They work great for this. Very responsive with no bad buttons in the batch.
S**C
Base separates easily from metal body if side-loaded
Normally closed switch purchased, 2 so far have failed, top snapped off when I was holding black base underneath to tighten the screw from top. Any slight side load On plastic or harness and base comes detached from upper body. I’m using hotmelt on back of the panel to provide extra support.
K**K
Buttons buttons I have so many buttons
I only needed one but the local electronics store charges more for a single switch that looks identical to these.Used to make a halt switch for a raspberry pi . It works well.
N**K
FFS. These are normally open, not normally closed like the description says.
They're fine switches, but they're not NC. They're NO, making them completely the wrong thing if you're buying this based on the description. Would be five stars.
S**N
They Work, but Not Cleanly
I tried using these in a guitar circuit, but the switch action is not quiet. I wanted it to operate a kill switch, but the signal clicks both when the button is pressed and released. They're probably great for other applications, but not for a guitar kill switch.
J**G
Why so many?
Only needed one piece. Lol. Super small connection points. But did the job
Trustpilot
1 month ago
2 weeks ago