Recover Tactical Picatinny Rail for Glock, Glock MOS, S&W Shield 9mm, SW40, Sig P365 (Must Select Your Model Below), Easy Install, No Mods Required

This fits my Sig Sauer P365X(L) with Wilson Combat grip module. No problems. It fits snug and secure. I was a little concerned with it being fastened with only a single screw, but it grips nicely onto grip module such that the screw really only needs to hold the two halves tightly together. It holds securely / reliably. It seems well made / sturdy / durable. I got this to be able to mount a Mantis X3 for training, and it works fine for that purpose. Note that I'm NOT using this to mount a weapon light for EDC. I have a light that mounts directly to the grip module. So, I'm using this ONLY when training with the Mantis X. I presume this would hold up under EDC use, but I can't confirm that. Since I'm putting it on and taking it off frequently for training, it seems inevitable that I'll lose the nut at some point. I appreciate that this came with an extra nut & screw. I was a little concerned that it would throw off the weight balance by moving the attachment further away (down) from the slide, but it seems fine - not too thick.

Wasn't sure when first installing this on gen 5 G26 frame but once it was on and snuggled down on set screws it clamped together nicely and seems pretty sturdy and stationary.

**UPDATED please read all** I must have ended up with a defective one. Yes it is extremely easy to install, and yes it is very affordable. Also the construction seems to be of sturdy quality. However, on one side of the gun once mounted, it fits slightly crooked and misaligned. Almost like warped from manufacturing and is slight off. The side profile fits on one side and seems to flow flawlessly with the slide, while on the warped side it dips down towards the barrel..... I really wanted to give this a great review as I really liked having the option. Plus it does look really nice on the gun. ** UPDATE** Gunsmith was able to file some material down, and heat the material to fix the warped side. Fits much better just slightly loose. However, the slide does not jam now and the one side no longer bulges out. Spoke with another individual who also purchased for his and it mounted right on with no issues. Reached out to company just in case mine was a fluke. Company responded back almost instantly and is sending a new one at no cost as this is not a known issue. Also, they reviewed pictures of what the Gunsmith shaved off and were concerned about the material the gunsmith removed. If you have any issues at all please reach out to company first! They are responsive and truly care about the product they put out. Would highly recommend!!! *** Just got new one in mail, mounted up perfectly, no issues!!!

Overall I really like this. It was *very* easy and quick to install and looks good. I'm glad I bought it. My only complaint (and yes, I'm being a little picky here) is that it is just a tad short and there really aren't any budget light options that work. Rather than paying too much for a relatively low-power light with no upgrade path that only works for one gun (I'm looking at you, TLR-6), I decided to get this rail along with a light that I could use on my shield but also use elsewhere. The question was - what inexpensive starter light could I buy for this rail? There is a customer question that asked if there are any inexpensive lights that fit the rail. The answer, by none other than Recover Tactical itself, gave a link directly to the "Ade Advanced Optics PL200" light, so I thought I'd hit the jackpot for an entry-level light and I bought one and I bought this rail. The ADE light is a very reasonably priced, simple, but bright 400 lumen light that I am happy with in and of itself, but it does NOT FIT ON THIS RAIL!!! I thought maybe a design change, but no, the Q&A was from just a month before I ordered both. I considered returning the light, but the cheapest light on the compatible list for this rail is (as of this writing) 2.5 times the price and this one at least can be used for other things as well. I was able to get an inexpensive riser that allows the light to work, but it feels like a hack and it was So yes, I would recommend this rail. I would have given 5 stars for the rail itself, but I have to deduct one for a misleading recommendation from the manufacturer.

Despite the horrible experience with the M9/92FS Recover rail, this one for the G17 works very well. Snug fit, but I'd argue that this is better [in some ways] than having a Gen3-5 rail. This rail accommodates for the angle of the frame as it graduates towards the muzzle so it can essentially make the rail parallel to the slide. On Glock rails however, they tend to pignose and aren't the most study rails. I would argue this Recover rail creates a more stable platform than the Gen3-5's. Easy to install and it doesn't seem to damage the frame at all. Lights will sit very slightly more forward on Glock-specific lights/attachments, but in other cases, the ability to use a 1913 rail on a Glock makes it sit about where it would normally. In all cases, however, the light will sit lower down because the attachment point is about a half inch lower than a Glock rail would be. In some cases again though, this actually helps. Worth the money, and if you're a Gen 1/2 owner or loyalist, this is a great addition that makes the frame even sturdier and IMO looks better than a Glock rail. FYI I did for the hell of it try it fit this on my G21 Gen2 and it wouldn't fit. As others have said, it would work with some time and a Dremel, but I personally wouldn't try it unless you're desperate and have patience to remove the right amount of material from what would be at least 4 areas. I did sand some areas with 1500 grit sandpaper just to smooth out some areas that the slide will touch, but it was barely needed--if at all. Thumbs up.

A good fit. A nice pistol accessory.

I didn’t want to be limited on my light options on my 43X, or buy light options that would only run on my 43X. This seemed like a great solution, and it definitely is. I carry my 43X either in a barebones, stock configuration with only a red dot, or a modified configuration where it shoots more like a full sized pistol but will not fit normal holsters or be as good for concealed carry. Now, I just leave this rail modification on when I run it barebones. When I want a more complete pistol, I thrown in a 3.9” PSA Micro Dagger threaded barrel, a micro compensator, an O-Light onto this new rail, and I have to switch out the factory spring for a tungsten lighter resistance spring. The only trade off for this light is that it will be hard to find a close fitting kydex holster that will really snap in once you throw a light on there. If you want that option you’ll need to drop the money and go straight for a TLR-8 sub or one of the other Glock slimline/micro rail compatible lights and a holster that will specifically fit that. However, this rail was absolutely the best fit for my needs.

The product is good. Does what it’s supposed to do, but be advised that the shipment took a ridiculous 25 days to arrive and I’m a prime member. Additionally, it was shipped in a simple Amazon bag which resulted in the box being totally crushed and making it unsuitable to be given as a present.

Fits perfectly on my husband's gun!!

マルイG26に無加工 ポン付けでした

以前G26用の物を購入しており気に入っていたためUMAREX G42用に購入しました． G26用はすり合わせ程度で取り付けできましたが，こちらは先端部の成形がUMAREX G42と合わずカッターとヤスリで干渉する箇所をかなり削ってようやく取り付けできました． 外観は少しごつくなりますが，手持ちのフラッシュライトを使いまわせるのでアンダーレールを追加できる本製品は本当にありがたいです． 加工必須のため，手間をかけたくない方はTLR-6等のG42専用品を買ったほうが良いと思います．

G26に20mmレールを追加できる！ 「G26にライトをつけたい．レーザーサイトを付けたい．」そんな願いを叶えてくれる一品です． モナカ構造でねじ止めするだけで簡単に取り付けできる点も非常にいいです． マルイのG26に取り付ける場合はスライドと干渉する部分をヤスリってやるなど多少の調整が必要ですが，手軽に自分のG26をドレスアップできるのはとても楽しいです．

当方、2個目の購入です。今回はK社のG26の為に購入しました。 実銃ベースで国産のガスガンは実銃よりフレームが大きいのかほぼ、ポン付けできません。 加工前提で購入した方が良いです。画像のドットサイトが付いているのは〇イのG26です。 こちらは1年ほど前に購入しました。 先端から見てバレルがシルバーの方がK社のモデルですが結構、ガリガリと 先端部や内部を削りながら現物合わせで装着させました。 比較してみますと、〇イの方は当たる部分を削ればきれいにフレームにフィットしますが 上部のスライドと干渉する部分を綺麗に削らないと動作に支障がでます。 調整はこちらの方が時間がかかりました。 K社の方はフレーム内に綺麗に収まっていません。若干、浮いており先端部がお辞儀しています。 とはいえ、画像で見る通りどちらも結構うまい具合に装着させることが出来たので 当方は満足しています。レール面は30㎜弱ですので装着できるライトは限られます。 一度、売り切れると再入荷まで時間が掛かりますのでG26をカスタマイズさせたいと お考えの方は見つけた時のご購入をお勧めします。