Infrared Thermometer Gun -50°C to 600°C, Digital Laser Temperature Gun with 0.1-1 Adjustable Emissivity, Professional Non-Contact Pyrometer for Pizza Oven, Kitchen Cooking, BBQ, HVAC & Engine

I have been using an oven thermometer for years, a metal one that sits inside the oven, as I do a lot of baking, getting an accurate oven temp is essential.I have been using a glass sugar thermometer for years for baking ( sugar work)I have been using a digital metal probe thermometer for years for sauces and glazes.....I recently needed a thermometer for me, to measure my temperature for some new meds and whilst I was looking at them I came across this one, which is not, I repeat is NOT, for use to measure your body temperature.And I realised I can do everything I do with all those other thermometers, but without the washing up, without getting up close & personal with boiling sugar, and without worrying the thermometer will cause crystallisation, because...you don't touch anything with it!It is marvellous.I compared it's reading with my other thermometers, which as I said I have been using for years and are trusted, and this IR thermometer was only 2 degrees c out compared to them, which luckily is no Biggie at all.It takes 2 batteries which are a complete nightmare to put in. The instructions are utterly pointless as well, it just says put the batteries in, it doesn't show on the lovely diagram where to put them in or even how to get to itSo, to put the batteries, that they kindly supply, you have to take off the whole red bit around the trigger.all of it.You have to pull really hard.Once the batteries are in, it is VERY difficult to get this red bit back onWarning: when putting the red bit back, it is really important to point the device at nothing, no people please, because as you struggle to get the red plastic back on , you inevitably mash the trigger, repeatedly, which means the laser is activated, and apparently this is really bad for your eyes, so please be careful where you point it as you fight to get the red back on.From there it's easy peasy.You can chose Centigrade ( Celsius) or Farenhight.Then simply pull the trigger and aim the laser light , which shows up as a red dot, at whatever you want to measure...oven temp, boiling sugar temp, etc etc.I also make plant dyes for clothes & yarn ( wool) , where certain reactions , or adding certain ingredients, happen at a specific temperature, again, just point the laser dot in the middle of your mixture and read the display. Easy.You cannot measure the temperature through things, for example if you point the dot at the side of your saucepan, it will read the temp of the side of your saucepan, not what's inside it.So glad they found this, easy to take measurements, pretty accurate, shame about the terrible instructions and battery compartment of dooom.😉

The infrastructure red thermometer performed excellently during engine temperature checks

Does the job, but not sure how accurate the readings are ( few celsius out i think)Buy battery with it, if you will using for pizza oven as the battery doesn't last long

Great quality and value product

Useful for making wax melts

Flimsey, but seems OK so far. Get readings I'd hope for when getting oven ready to throw a pizza in. Just not 100% that what the laser is pointing at is the same as sensor is sensing at some times, but certainly functional for seeing whether pizza oven/stone is ready to chuck a pizza in. Not a quality item, but works enough.

What a gadget! To be honest I'm not sure about the accuracy (it's accurate enough for my purposes, and you can calibrate it), but it's cheap, convenient, and works. I was somewhat dubious about the picture of it measuring the temperate of a swimming pool, but it tired that, and it does that too. Great value.

Great for our new Pizza Oven

But ones one figure it out, it was easy to point and get a good enough reading. Sensory spots are good to have as well, but this helps alot when one wants to make sure it’s temperatures are good

Lo uso per la termo pressa . Fa ciò che deve.

Das Infrarot Thermometer ist rundum klasse. Von der Optik bis hin zur Verarbeitung und Handhabung gibt's hier nichts zu bemängeln. Das Gerät besteht zwar fast ausschließlich aus Plastik, wirkt aber gegenüber preislich höher platzierten Thermometern nicht viel weniger "wertig". Die Inbetriebnahme klappt ohne Bedienungsanleitung auch einwandfrei. Es werden lediglich 2 AAA Batterien benötigt, diese liegen dem Lieferumfang bei. Danach kann das Temperatur-Messen gleich losgehen.Das LED Display ist dabei gut beleuchtet und nach jeder Messung erfolgt ein zusätzlicher Piep, sodass es für jeden auch einfach von der Hand geht. Falsch machen kann man nichts. Sobald der "Auslöser" gedrückt wird erscheint der Laser, dabei ist es egal auf welche Oberfläche dieser gerichtet wird. Lässt man den Auslöser wieder los wird die jeweilige Temperatur am Display angezeigt. Trotzdem sollte man für genauere Messungen näher am jeweiligen Objekt sein.Desweiteren bietet das Thermometer einige verschiedene Funktionen. Beim drücken der Mess- und MODE Taste kann man zwischen den maximalen oder minimalsten Messwert wechseln. Temperaturabweichungen sowie Laser können korrigiert bzw. deaktiviert werden. Ebenfalls besteht die Möglichkeit zwischen °C und °F umzuschalten. Unter EMS ist zusätzlich noch das einstellen des Emissionsgrad's möglich, falls eine besondere Oberflächentemperatur gemessen werden muss. Die Anleitung ist dabei einfach gehalten und leicht zu verstehen. Ob die angezeigten Temperaturen nun exakt stimmen, kann ich kaum beurteilen. Insgesamt wirkt aber alles stimmig. Alles in allem eine klare Empfehlung zu einen wirklich sehr guten Preis.

Conforme à mes attentes,temperature fiable, comparée avec un thermomètre classique.

Compré este termómetro infrarrojo para comprobar la temperatura de distintas superficies y me ha resultado una herramienta muy práctica.Lo he utilizado, entre otras cosas, para revisar la temperatura de cables, conexiones y distintos elementos de una instalación eléctrica, buscando posibles puntos calientes que pudieran indicar un problema. Al poder medir sin contacto, las comprobaciones se realizan de forma rápida y muy cómoda.También lo he utilizado en radiadores, salidas de aire acondicionado, tuberías y otros equipos de la vivienda. La lectura es prácticamente instantánea y la pantalla resulta fácil de leer.Me ha gustado además que permita ajustar la emisividad, ya que esto ayuda a obtener mediciones más fiables sobre materiales diferentes cuando se necesita un poco más de precisión.Como es lógico, este tipo de termómetros mide la temperatura superficial, por lo que hay que utilizarlo teniendo en cuenta esa limitación.En mi caso ha cumplido perfectamente con lo que buscaba y se ha convertido en una herramienta muy útil para tareas de mantenimiento y diagnóstico en casa.