Buy anything from 5,000+ international stores. One checkout price. No surprise fees. Join 2M+ shoppers on Desertcart.
Desertcart purchases this item on your behalf and handles shipping, customs, and support to British Virgin Islands.
desertcart.co.jp: CHUMXINY Brake Bleed Kit for SHIMANO, TEKTRO Hydraulic Disc Brakes, Including High Performance Mineral Brake Fluid (120ml). : スポーツ＆アウトドア Review: Buy ut for varla - Varla one eagle is new Review: Fantastic Product - literally a 5 minute job with this kit! - Cheap and comes with all the pieces you need. Firstly, it comes with all bet bits you need to bleed the braked on Shimano Ultegra R8000 Road Brakes. You do not need to buy the Shimano adaptor. I will share an idiots guide below in case anyone needs it. 1) Slide the brass retainer over the clear tube and push the end over the syringe. The brass ring is to hold it tight. 2) Remove the wheel, retaining pin and screw to remove the brake pads. 3) Fit the yellow brake pad in the void and re-apply the retaining screw (If the yellow block won’t fit, use something to push the pistons back then apply again). 4) Slide the tube clamp over the tube 5) Attach the hose and syringe to the bleed valve, using the 7mm spanner (included), open the bleed valve, literally 1/2 a turn. 6) Close the tube clamp and go to the lever. 7) Peel the hood back, expose the screw. 8) Using a 2mm Allen key, remove the screw and keep safe. 9) Find the yellow adaptor to fit the hole, try the larger ones first. 10) Attach the yellow funnel and 1/2 fill with oil. 11) Release the tube clamp and draw the fluid back into the syringe until there are no bubbles (you will see the fluid being drawn out of the funnel) 12) Close the bleed valve on the calliper then pump the brake lever a few times, you may see some bubbles, but until it feels firm. (Took me about 6 pumps then it was solid) 13) Push the plunger into the funnel to stop oil leaking out when you remove the assembly. 14) Carefully unscrew the yellow Cullen and adaptor, when removed re-apply the brake lever screw and tighten. 15) Clean the area of oil, isopropyl alcohol works well, or just wipe with a tissue and put the hood back. 16) Clamp the hose at the syringe, carefully remove and immediately wipe the area clean. 15) Re-assemble the brake pads and wheel etc, and enjoy your new brakes. I cannot fault this system. I am a 1st time brake bleeder. It took 5 minutes, worked flawlessly. You don’t need any other kit, or to pay your shop £25 to do it for you.
| ブランド | CHUMXINY |
| メーカー | Heywood |
| 個数 | 21 |
| 商品寸法 (長さx幅x高さ) | 19 x 10 x 6 cm |
| 材質 | プラスチック |
G**!
Buy ut for varla
Varla one eagle is new
H**Y
Fantastic Product - literally a 5 minute job with this kit!
Cheap and comes with all the pieces you need. Firstly, it comes with all bet bits you need to bleed the braked on Shimano Ultegra R8000 Road Brakes. You do not need to buy the Shimano adaptor. I will share an idiots guide below in case anyone needs it. 1) Slide the brass retainer over the clear tube and push the end over the syringe. The brass ring is to hold it tight. 2) Remove the wheel, retaining pin and screw to remove the brake pads. 3) Fit the yellow brake pad in the void and re-apply the retaining screw (If the yellow block won’t fit, use something to push the pistons back then apply again). 4) Slide the tube clamp over the tube 5) Attach the hose and syringe to the bleed valve, using the 7mm spanner (included), open the bleed valve, literally 1/2 a turn. 6) Close the tube clamp and go to the lever. 7) Peel the hood back, expose the screw. 8) Using a 2mm Allen key, remove the screw and keep safe. 9) Find the yellow adaptor to fit the hole, try the larger ones first. 10) Attach the yellow funnel and 1/2 fill with oil. 11) Release the tube clamp and draw the fluid back into the syringe until there are no bubbles (you will see the fluid being drawn out of the funnel) 12) Close the bleed valve on the calliper then pump the brake lever a few times, you may see some bubbles, but until it feels firm. (Took me about 6 pumps then it was solid) 13) Push the plunger into the funnel to stop oil leaking out when you remove the assembly. 14) Carefully unscrew the yellow Cullen and adaptor, when removed re-apply the brake lever screw and tighten. 15) Clean the area of oil, isopropyl alcohol works well, or just wipe with a tissue and put the hood back. 16) Clamp the hose at the syringe, carefully remove and immediately wipe the area clean. 15) Re-assemble the brake pads and wheel etc, and enjoy your new brakes. I cannot fault this system. I am a 1st time brake bleeder. It took 5 minutes, worked flawlessly. You don’t need any other kit, or to pay your shop £25 to do it for you.
U**1
Purge frein
Excellent produit, fournis avec tous les adaptateur et huile de qualité, merci.
M**H
Sehr gut
Hat bei mehreren Rädern mit Shimano Bremssystemen sehr gut funktioniert. Es ist alles dabei was man braucht.
K**N
Een doordacht goed product
Goed de gebruiksaanwijzing lezen, werkt simpel en goed veel koppel mogelijkheden gewoon een doordacht goed product.
Trustpilot
3 weeks ago
2 weeks ago