LZLRUN 3D Carbon Fiber Vinyl Wrap - Outdoor Rated for Automotive Use - 12 inches x 60 inches Contain Knife and Hand Tool (Black)

Ive used the gloss black for my chrome trim by the windows and it was fire. Used this to cover up some of my trunk, after using many different brands and failing, knew LZLRUN would come through with the best product. Air release was buttery and it was so easy to get bubbles out, like it wanted to come out it’s not normal! Doesnt crumple up, or crease like some wrap. Honestly a forever fan of LZLRUN’s wraps/tools.

Really good looking carbon fiber. Great for flat surfaces. Difficult with curved surfaces and takes a lot of practice. Stretches well. Finished product looks good when you get good at installing.

Good quality, little tricky on corners but with a.little patience and a good hot air gun hard to tell the difference between it and real carbon. Claying before applying strongly suggested

I bought this vinyl wrap for my old laptop and was quite happy with the result. It feels premium and looks stylish with its carbon fiber pattern. The adhesive sticks well and doesn’t peel off easily. I haven’t removed it yet, so I can’t comment on whether it leaves any marks or residue afterward. The included tools are very handy and definitely a plus. The wrap itself isn’t too thick, so it doesn’t add noticeable bulk to whatever you apply it on. That said, the application process isn’t very easy — like most decals, it takes time and patience if you want a perfect, bubble-free finish. Overall, it’s a very good product if you’re looking to give an old item a fresh, classy look. Just keep in mind that removing it later might or might not leave residue, as I haven’t tested that yet.

This wrap is pretty good for doing flat surfaces like most of the cheaper priced vinyl wraps. I used it to wrap a diffuser I made for my Volvo and it came out pretty good. One thing to note though, is if you are in the process of wrapping something, if it gets stuck to the thing you are wrapping by accident before you can smooth out the bubbles, take it off slowly, it has such a strong stick that it can rip it easily. I had this happen once but I ordered enough so I was okay. Also, if you do get some air bubbles, what I did to get rid of them is poke a small tiny hole in the bubble with a razor and then smooth it out so the air can release. When I did this you couldn't even tell there was a slit and the bubble went away. It's not thick but it's not thin either. I've seen several others that are thicker and thinner but this one is just right. I've used this stuff before for many different things including the battery covers on my phones, my tablets, my car hoods and trunks. **A good tip** If you want it to look shiny and more realistic like real carbon fiber, spray some rustoleum 2x gloss clear on top of the vinyl once you're done wrapping. Do light thin coats and no more than two because if you use too many then it makes the weave looking texture kinda go away. I did this to mine and it looks awesome. Some people thought it was real carbon fiber after lol Overall it's a good product and a great price. Gets the job done great.

Looks good and feels good. Installation went so'k, same issues everyone has already expressed. My issue is that once installed it starts to peel away from application after a few days and appears to shrink. I prepped surfaces as I usually do with cleaner/degreaser and then use alcohol to final prep, slight heat on final application. Maybe Im doing something wrong, no sure

Easy to work with, looks better than most carbon style wrap.

Initial install came out fantastic and I was happy and ordered more, but after a few hours under the California sun, they all started bubbling up. The time I spent wrapping and trying to repair was a total waste of my time. Prior to using this crap, I've been doing wraps on all my vehicles using Vivid Vinyl and never had issues. It's true what they say, you get what you pay for.

I recently used this carbon fiber wrap for a DIY project, and I’m really impressed with the results, especially considering I had zero experience with wrapping before this. The material feels high quality and has a realistic carbon fiber look. One tip I’d definitely recommend: use a heat gun. It makes a huge difference when trying to stretch the wrap around curves and corners. The heat helps the material become more flexible and easier to mold, which really helped me get a smoother finish. There was a bit of a learning curve at first, but overall it was pretty forgiving and easy to work with. If you're new to wrapping, take your time, use some heat, and you'll be surprised at how good your results can look. Would definitely buy again for future projects!

Muy buen producto

エブリィワゴン da17wのピラーに貼りました。両側の６箇所分として足ります。比較的簡単に貼れて扱いも良かったです。

نوعية جيدة أستخدمته لحماية ولتجميل الجوال من الخلف

Its very good quality but didnt come with a Hand tool or knife in the photo