Tieasy 30" Island Range Hood 700 CFM Ceiling Mount Kitchen Vent Hood with Gesture/Touch Control, 3-Speed Fan & 4 LED Lights, Convertible Ductless/Duct, Stainless Steel Baffle Filters,Time Setting

I stallation isn't too bad its helful.to have an extra person. Air flow is good noise level is acceptable even on high. Customer service is great at handling issues.

I have to give this 5 stars, even if installation was not easy at all. It was mostly because I had to reinforce the attic joist I needed to cut out of the way for the duct before I could even begin. You’ll definitely need some help too, because this thing is heavy. If you don’t have two very strong people to lift and hold it while you (the 3rd person) puts the screws in, you might need to use some creative problem solving to get it up in place. We had to place a ladder on one side of the island and put one end of an 8 ft long 2x4 on the ladder, with the range hood on top of the 2x4, and have one person lift the other end of the 2x4 and hold it in place while the other person threaded the screws in. Otherwise, just the 2 of us could not do it. In the end 5 stars because it’s simply gorgeous when completed, plus when I noticed the metal was bent on the lower chimney, and reached out to the seller, the only thing they wanted to know was my address, so they could send me a replacement asap, major thumbs up!

Este producto es muy fácil de limpiar no se mancha fácilmente y la grasa que se adhiere del vapor se retira súper fácil

Works good and no problems. I would give 5 stars, but the blue protective film was a NIGHTMARE to remove. It was as hard to do that as the entire job. Woks as should.

The unit is working well but...you need a professional to install this island hood. It is not necessarily the same chimney fit as your old one if replacing. If new installation doesn't matter. My carpenter had to make many adjustments and do sheet rock work to get it installed. The digital panel is not easy but with a good deal of effort you can get the clock set. The information on the distribution states the lights are dimmable. That is absolutely not true. They are not dimmable and that was very disappointing for me. The lights are bright. However the unit is functioning properly and well. But had I known the led lights were not as stated, I would have kept looking.

Very nice, looks great in our new kitchen, haven’t really used it yet , but just turned on the lights and fan so far so good

I rarely write negative reviews, but this deserves one. Installation is not easy, but that might be expected. No, it is a truly dumb step in manufacturing that will leave unsighly bits of protective blue plastic stuck in the assembly. When this product is made, earch stainless part is first dipped in plastic to protect the metal. AFTER being coated, the parts are riveted togather. The blue plastic is very weak, but adheres strongly to the stainless, so removing it from even the large peices is hard work. But in every riveted seam or fasterner, there is a little bit of blue plastic that will remain. This is visible, and there is nothing you can do to remove it. The plastic film is too weak to be scrapped out with a knife tip or pick. I even tried a propane torch to melt it (discoloring part of the stainless), and the plastic just melted and flowwed deeper into the seam. It is stupiid manufacturing, not poor quality materials that is the problem.

Absolutely love the way that it came out. Easy to install. But 2 people would be better than 1. I installed it on my own just took me a little longer. The instructions could use a little more explaining. Had to figure some of it out on my own. Looks great in our kitchen. Very fancy looking. It’s a little noisy but works great.

Update: I had a question about the install and the sellers communication was above and beyond. I would definitely use this seller again! Removal of the protective plastic is EASY! Read on… The enclosed instructions are very generic since they cover 3 or 4 different mounting styles. That being said installation is pretty simple and straight forward. 1) mount the top plate to the ceiling (I ran some 2x4’s in the attic on top of the drywall and screwed into those instead of using the drywall anchors). 2) Cut your hole for the vent hose. 3) assemble the anti-backdraft pieces and install the vent hose onto the range hood. (I used #4 screws to hold it in place and aluminum HVAC tape to support the first 4-5 inches of hose in an extended position) - my concern is that the hose may collapse (contract) and the anti-backdraft pieces not open completely. 4) assemble the angle supports to the length you want and attach them to range hood. 5) use a utility knife to cut the protective plastic down the seams of the cover pieces. Remove the blue protective plastic. 6) slide the cover box pieces together and down over the angle supports. 7) lift the hood (2 people required) into place and screw the angle supports to the ceiling bracket. 8) raise the inner cover box piece to the ceiling and install the self tapping screws. 9) remove the 4 screws holding the glass. Lift the glass to allow easy removal of the protective plastic film on the range hood.

J’ai mit cette hotte au dessus de mon poêle au gaz.Elle aspire très bien. Par contre la compagnie n’a pas pensé à ceux qui élèvent la pellicule bleue de protection. On doit prendre un exacto pour le couper dans les plis. Ils auraient pu en mettre sans les attacher dans les plis et cachés sous la vitre. C’est un gros défaut de la hotte.

Utilisé pour îlot domestique. Pas de problème d'installation sauf que j'ai dû inverser la sortie du tuyau du fan pour éviter les fermes de la toiture et il fonctionne très bien et est très efficace

This range is working really well so far. We've had it installed for a few weeks now. The fans/vents work great and are not too loud on full with good suction power that seems stronger than 700cfm. The range is well made with strong feeling metal and all the features/functions work well. The touch panel is responsive and the gesture controls work well also. Installation was straight forward and we ran in to no problems while installing it. The Led lights are good and bright as well. So far we're liking it, it looks good and it works really well. I think the price is very fair.

It looks nice, but the suction power is weak. And it's not easy to install.