METER STAR Grill Igniter Kit AA Battery Two Exits with Spark Plug Wire Length 1 Meters Long (Two Electrodes)

Had a problem with the peizo igniter on a Thetford oven and grill in our motor home. It would intermittently work and then not work. It had been back to the supplier but each time they could not find a fault. Just like having toothache and then going to the dentist. I decided to purchase this unit to replace the peizo igniter. I needed to widen the mounting hole, which took all of 2 seconds with a cone drill. The original electrode prob connections was exactly the same connectors. So just pushed on without any effort. The whole job was done is no more than 5 minutes. Button is slightly bigger that the peizo button. But the operation is a 1000 times betters and a lot less noisy. All we will do is at the start of each season simply replace the AA battery and it will be good for a full season. Operation is simple Turn the gas on and press the button on the igniter with one press until the burner lights. It works perfect every time. One word of advise. Do not be tempted to try/test the operation of the unit until its connected - it packs a real kick.

I bought a hob for my camper van - which disappointingly didn't have electric ignition. I wondered if this might be a good option? I drilled three holes in the hob, fitted this and now the burners ignite easily. You need to bend & trim the electrodes, taking care not to break the ceramic insulator - but it's easy enough with two pairs of pliars. I generates a spark up to about an inch long - but ignition is most reliable with a spark 1/8 to 1/4"

Gas fire piezo failed, couldn't use match to light as gas/coals are behind glass, manufacturers replacement unit was a crazy price...purchased this, fitted within half an hour, fire now lights first click every time. Brilliant bit of kit!

My hobby is live steam garden railway. I was experiencing a big problem lighting the gas burner on a model loco and fast running out of options, and so decided to give this product a try. This really was a eureka moment and I'm delighted with the result. 100% reliability every time in firing up, previously unheard of. Best thing since sliced bread.

Large push button block but works very well

Works better than I thought

would not work after spending 30 minutes installing. I could hear the clicking but no spark generated.

Using for upgrade to manual igniter in static van hot air CH system. Tested and works well.

I used this on a vent less natural gas heater. The original igniter was a push button pizeo igniter. I used the old igniter which was putting out a good spark. Ran the new wire to it. The the charge comes from a AA capacitor in a box. I had to enlarge the hole for the push button which sets off the spark. I also had to run a lead off the second terminal because the two terminals would spark each other. I just laid that down inside the heater where it gets the power but is not close enough to any metal to spark and if it did no harm. You do need to run that lead off the second terminal. Some kits have multiple terminals this only has two. Sure is better then to keep pressing that old red button to light the heater. I like what I did works great. I have a couple of these heaters and I eventually will do the same to all of them. I have to wonder why they were made with manual igniters in the first place.

Have send back, worthless to me.

Ottimo prodotto, l'ho acquistato per un fornello da campeggio e funziona benissimo , la batteria si sostituisce dal tasto di accensione quindi può essere incassato tranquillamente. Consigliatissimo

Höll inte så länge.

Der Austausch funktionierte reibungslos und das Grillen macht wieder Spaß.