COLAMY Ergonomic Mesh Office Chair,High Back Computer Executive Desk Chair,Lumbar Support with Adjustable Headrest and 4D Arms, Slide Seat, Tilt Lock-Black

This is my review of this product, its well packed keeping the product inside safe, all accessory, bolts are intact and parts are well cushion, easy to assemble with allen tool included, and just a heads up the base seat cushion is very heavy so it needs a little effort in removing it out from the box, overall the quality of this chair is very good, and its well made, its comfortable and looks premium, I like the knobs with this chair the forward n back and tension knob for tilting are nice feature but what I noticed about rotating knobs when you are in sitting position and try to adjust it may hurt your wrist while turning it so its something to be aware of, and the arm is made of hard rubber material it would be great if its a little softer, you can adjust the arm up n down, forward/back, side by side direction, 80/100deg tilt position its a nice features but the issue is when using this frequently it become loosen overtime, the seat cushion is firm not sure if there is spring inside that makes it firm or the foam itself is firm but I want a car seat feeling but this one is different, seat material is a little rough maybe cuz it it is still new, overall for the low price you paid for a premium look and good quality is a good buy, recommend it.

It's a hit or miss sometimes when ordering furniture online, because much of your satisfaction with the product is going to be based on your personal experience with it, not technical specs. I was confident after doing a ton of research online both via reading reviews for this chair on Amazon, as well as watching video reviews on Youtube, and ultimately decided that this was the best office chair in this price range for me to invest in. Is it worth it to buy a new chair if your current chair still works? I had doubted the value of this investment as well for this very reason. However, I can now say with confidence that it was one of the best investments for my workspace, and that I should have purchased a new chair much sooner. It only took me 20 minutes to put this thing together, and it is SOLID. My favorite features: SEAT CUSHION - This new chair has a very supportive and comfortable seat cushion, which fixed the pain I was developing in my lower back and coccyx from my previous chair and its flatter, older seat. BACK SUPPORT - The built in lumbar support is making a huge difference in my posture, which goes on to affect my shoulders as well. It is often overlooked in office chairs, but trust me, it will save your back especially if you are at the desk for extended hours. NECK REST - I've seen a lot of people say that the neck rest in office chairs are not really comfortable or useful, but that is not the case with this chair. This chair offers an adjustable neck rest that is breathable and very nice to lay on, encouraging comfortable breaks throughout your work sessions. LEANING - With an adjustable tension for leaning back, this chair has been great to take breaks on between focused work sessions, or when you want to just sit back and watch a movie on your computer. I tend to keep the function locked when I am working so that I am always sitting upright without a tendency to slouch or lean back. ADJUSTABLE ARMRESTS - Understated feature in office chairs. Depending on what you are doing on your computer and how you are sitting, you will find that the adjustable height and positions of the arm rests give you so much more support you didn't think you need. Getting your arms supported properly throughout your work is going to make a huge difference on whether you will develop tight shoulders and neck. Conclusion: My hip, back, and neck tightness have all gone away since using this chair. I was a skeptic about whether it would actually contribute to alleviating all these issues, or whether I was just at my desk for too long, but it turns out this chair has saved my back and enabled me to work longer, more productive hours at my desk. If you are in the market for a new chair within this price range, this is it. Buy it, spend the 15-20mins putting it together, and you'll never look back. Totally worth it.

I purchased this in March 2024 after looking at countless chairs in all price ranges. At the time, it looked like I had found the perfect chair, and for a while, I was pleased. It wasn't $1,000-1,500 like most high-end office chairs. It doesn't look like a cheap, low-end office chair. It may not have all the bells and whistles of some premium office chairs but does deserve credit for the amount of adjustability the chair gives you compared to other chairs in the same price range. Fast forward to a little over one year later, the mesh on the back of the chair began fraying. At first it wasn't much of an issue; it was more of a minor eyesore than anything. After another month, the mesh on the back of the chair has now frayed to the point that it pricks/pokes into my back to the point it's as if I'm sitting on a prickly bush. If it were just an eyesore but didn't affect the ability to sit in the chair, I wouldn't be taking the time to leave this negative of a review and would have just lived with it. Technically the chair is still able to be sat in of course but not without having to sit in weird positions to try to avoid the constant discomfort of being pricked in my lower back by hundreds of mini thorns. The fact that I'm now forced to sit unnaturally negates all of the ergonomic benefits and adjustability advantages that caused me to purchase the chair in the first place. The pictures make it look less harsh and less prickly than it actually is. I tried from multiple angles to get one that accurately depicts just how much fraying there is and just how prickly it is, but it was a challenge. I didn't want to spend the amounts that the "premium brand's chairs" come with, but now that I can (essentially) no longer sit in this chair after just over a year, I'm left wishing I had either purchased an extremely cheap chair for a fraction of the costs or had shelled out the money to purchase a "premium" chair even if that meant paying 3-4 times the price of this one. Hopefully this will help someone else avoid finding themselves in the same position I've found myself in—having to purchase another chair for the second year in a row.

I'd say 3.5 stars. TLDR: Something broke within 3 weeks, but it is a nicely packaged easy to assemble chair that actually feels quality in comparison to other brands. I have a feeling my seat breaking is not normal as it seems fairly well built. Pros: - Easiest thing I have ever assembled. The instructions are packaging are exceptional. - Build quality seems pretty good. I've used it for about a month now. - Fairly comfortable (but this varies for everyone - I am tall and lean, at 6'3" and 200lbs. With a longer than average torso). - Decent amount of adjustment options. - Quality versus price is good. Cons: - After 3 weeks of use the chair seat forward/backwards adjustment has failed. Even in the locked position it slides forward when I sit in it. I used epoxy glue to fix it in one place to not move. - I find that I have to keep the seat recline locked. Even with the tension at maximum it falls backwards. This could be due to my long torso. My armpits are where the seat back ends for reference. - I find that the seat back doesn't go forward far enough, I had to put a pillow behind me to sit straight, otherwise I hunch forward to compensate for the leaning back angle of the seat back in the full upright position. - The head rest is nice, but my head rarely touches it unless I am leaning back, due to the seat back angle. - The seat cushion does move forward and back which is an excellent feature, but for me two negative things happen. 1. It won't go far enough forward to give me the two fingers of space between the back of my knees and the chair (again this all depends on your height etc.) 2. When the seat cushion is all the way forward, it is uncomfortable for me as I feel even more reclined in the chair and after a few minutes feel a lot of pressure and blood pooling in my upper and lower legs. - The arm rest move around a bit too easily, a lock would be nice. As with every chair I have tried, the arm rests are a bit too far out, so keeping my elbows close to me is difficult. If you don't have this problem in your current chair, this chair will likely be fine. The arm rests also don't go high enough and I have to slouch to use them, but again I am long torso so this is every chair I have ever used. All that said, not a horrible chair for tall people, but you will be uncomfortable at some point (like every chair I have ever used, the best being a secret lab, but it is not great at all as it is a gaming chair and those are not ergonomic in any way). So overall, 3 stars mostly because something broke rather quickly, but this chair will likely work for many people out there in the 5'5" to 6' range.

The chair arrived in great condition with only one small dent in the box. Packing was very good and removing the chair parts after opening the box was pretty easy. All parts were included as well as one of each of the screws as spares and they also included the actual tool needed to put it all together. Once assembled, I discovered that the headrest actually has 3 adjustments. You can lift the headrest up and down on a ladder ratchet style assembly, you can rotate the mesh headrest to adjust for the curvature in the back of your neck, and you can also pivot the base of the headrest assembly forward and backwards about an inch or so. Caution: When making this adjustment for the first few times, it is very, very stiff. Its best to fully assemble the headrest by attaching it to the chair, then get behind the chair, place an hand on each vertical part of the headrest just above where it bolts to the chair at the pivot point, and slowly move the headrest forwards and backwards just 1/8th of an inch at a time which will loosen it up a bit with each movement. Keep an eye on the notch at the pivot joint and don't try to move the headrest more the the notch will allow. The back of the chair where the headrest bolts on will flex a little bit, but not break. All of the rest of the adjustments on the chair provide good range including the height adjustment, back recline adjustment, back tension adjustment for reclining and the seat front to back position adjustment. Remember to "LOCK" the seat adjustment into place after setting the seat to the position that fits you best by pushing the knob in until it locks. Pull it out, set it to your desired seating position, then push the knob in to lock the seat in place. This will keep the seat assembly from moving when you move in the chair. The lumbar support depth is really not adjustable front and back, so you determine how much pressure you want on the lumbar part of the chair by moving the seat assembly front or back. You can adjust the lumber support lower back / waist pressure point up and down to fit your waist area. Some suggest aligning it with your belt when sitting. When reclining, the chair and the seat bottom both move in a proportional way, but it is not a rocking chair. If you are coming out of an executive style chair that rocked, this will be a different experience for you and takes a little getting used to. The bottom seat of the chair is pretty firm as well and the foam is cut to kind of roll off at the sides a little so you can comfortably sit on one leg or both legs. The vertical part of the chair arms are made of solid metal and are not adjustable in or out as they are fixed in place very solidly with a connection to the seat. However, the tops of the arms are 4 way adjustable. The arms will stay pretty much fixed in one position with you recline in the chair, which is a little annoying because in that position, the chairs arms, when slid all the way back, don't really provide much if any support to your arms since they are attached to the chair bottom. To help remedy this, I took my arms apart and reversed the top sliding part to extend further to the back of the chair instead of the front of the chair. This change helps a little, but still not perfect. When moved all the way forward, they are just right and when you sit in a reclined position, and move the arms all the way back after making the adjustment, they are acceptable to me. I also ordered a pair of Aloudy brand arm pads to put on the chair from Amazon and they fit and feel wonderful. Here is the link to them. https://www.amazon.com/dp/B01M8F9IYC?ref=ppx_yo2ov_dt_b_product_details&th=1 Overall, its a really nice chair. It is a little heavy, but for my 6 foot 1 inch frame at 200 pounds, it is a pretty comfortable chair. Its totally quiet and nothing rattles or is lose. It turns, reclines and rolls very easily and appears to be of very good quality. The seat is fabric and the back and headrest is a mesh material that breathes very well. Time will tell how long it all holds up, but overall it appears to be a pretty high quality product. I'll be keeping it.

I’ve had it for about a year. Pretty good chair. For the price. The recline feature is nice. I wish the headrest would stay up naturally, I’m a pretty big guy 6’5 240. Eventually I just put two command strips on top of each other and a screwdriver to prevent that mechanism from moving vertically. Not a big dill but alas I’m just fixing something that shouldn’t need to be retrofitted in order to work as designed (pic attached). Wish the armrest came further back to my body also not a bid dill for the price. Pretty good chair all things considered.

As many other reviewers have mentioned, this is a solidly constructed office chair. The shipment took about a week to arrive and there were no issues with damage or missing parts. Assembly took about 10-15 minutes. First off, the chair is VERY comfortable. The seat is firm and supportive and fits my frame very well. I had tried the Hinomi Pro V1 office chair and the mesh "hammock" style seat was miserably uncomfortable and caused hip and upper leg discomfort so, I decided to try the Colamy. The seat is a massive improvement. The seat back is also quite comfortable. The recline stops work well but, I personally would like a little more recline tension. I'm 6' ~215 lbs so, this may not be an issue for people with smaller frames. The adjustability of the headrest is quite good whether you are sitting upright and need less forward protrusion or fully reclining and looking for more forward head support, I can always seem to find the "just right" spot. Now, for the not so good. Most of the features of this chair are very well thought out and designed but, they missed the mark with the arms on this chair. The arms seem as though they were designed by a different team at Colamy. The arm construction is a solid metal base with hiqh quality vertical adjustments. I don't like the fact that the arms don't move when you recline. It leaves an awkward space between the seat back and the arm supports when are fully reclined. I can live with it I guess but, this is supposed to be an ergonomic chair and in my opinion, that's a big miss. The most disappointing feature by far, is the "4-D" adjustable arm pads. They are not even close to being on par with the design features of the rest of this chair. The side to side adjustment is loose and the forward/backward slide adjustment is super loose. Like most people, when I get out of a chair, I use the chair arms to help push myself up. In the Colamy, the top arm pads slide all over the place. This is a major nuisance as you have to readjust everything every time you sit down and just bumping them with your arm will send them out of whack. To help fix this, I removed the four screws on the bottom side of the pad (you have to rotate the pad left and right to get access to the two in the middle section). To adjust the side to side motion, you have to remove the allen screw and pull the arm pad off. You can then tighten two Phillips screws and one allen screw to make side to side movement require more effort. The rotating motion is okay. They put some thought into this design and used a notched metal piece with nylon fingers and plastic "springs". To fix the forward/backward motion. I used high density foam that I pulled of a piece of packaging that was headed to the trash. The foam has to be high density to provide sufficient additional resistance for the cheap plastic spring tabs that are used. Cut the pieces slightly oversize and press them into the slots with a screw driver and reassemble. This still allows movement but, it takes much more effort (not too much) to move forward and backward). With everything tightened up, it's a definite improvement. I'm no longer constantly fiddling around with the arm pads everytime I get out of the chair. With the fix, I'd give this chair a 4 to 4.25.

Assembly was easy, good clear instructions step by step. Quality workmanship and parts is apparent throughout. Lots of adjustments allow me (5' 10") to get it just the way I want it. I would have given it 5 starts, but I only give it 4 stars because of the lumbar support, it's hard, not cushioned, and it sort of pokes my back right where I want the support. I'm hoping I can get used to it or make some sort of adjustment or fix for it. Overall, I think this chair is good value for the money. Edit: After approximately 28 days, the recline lock mechanism "broke" (stopped functioning properly). I contacted Colomey, and they requested a video of exactly what the problem was. I did send them a video. They then told me they would send a new chair, and that I would not need to return the "ole" one. In about a week, I got the replacement chair. I was disappointed that the original chair broke in that way, as I thought that I was getting a really quality chair. I'm now out approximately $300 with a fully functional chair that I'm wondering if it will stop functioning any day now. Hopefully, this one will not break. As far as the lumbar support complaint that I made, I will say that I have gotten used to it and it is no longer an issue, but leaving it as 4 stars because of the unreliability of the chair

Mon fils est très satisfait. Beaucoup d’ajustement pour un confort personnalisé.

amazing chair, very comfy and actually healthy for my back

Después de ver docenas de videos de YouTube sobre sillas de menos de $500 USD, me decidí por esta Colamy Atlas y vaya que valió la pena. Está muy sólidamente construida, super ajustable y con buen soporte. El respaldo es cómodo y fresco gracias a la malla, y el soporte de la cabeza es muy ajustable y genuinamente funcional, en especial para llamadas de Zoom. En general muy satisfecho con la compra después de 6 meses de uso constante en home office. Realmente sslvó mi espalda! Quizá los únicos puntos a mejorar sean el soporte lumbar plástico sin acojinados y la baja resistencia del respaldo al reclinarse sin asegurar la posición. Pero por el precio, de las mejores opciones que hay.

A great deal of research went into choosing my new office chair. Colamy Atlas is a terrific choice for high quality without breaking the bank. Helps that it looks stunning too in a lovely shade of light grey!

It's a little stiff at first but give it time and it will do wonders especially for your lower back.