SICOTAS Shoe Storage Cabinet, 30 Pairs Rattan Shoe Cabinet for Entryway

Im usually skeptical about ordering furniture off Amazon as its a hit or miss with quality, broken pieces, and you're basically stuck with it or need to go through the hassle to returnHOWEVER this is not the case for this Pros: -great quality and even better for the price. Worth every penny - very sturdy - easy to assemble - holds a lot depending on shoe size, 30 is upper limit. My wife wears a size 7 and im a 9.5-10. We use the right-hand side to store 4 shoe boxes. If you put shoes under the furniture you can maybe fit 30 total. Its deep enough that can slip shoes under there without them sticking out - doesn't look like a shoe rack - can add center pieces or decoration to the top shelf - looks great Cons: - none Overall came very well packaged and protected, it is heavy and bulky so may need 2 people to carry package. I wish it did come with an extra 1-2 shelfs for those who dont want to use the right hand side for boots but otherwise its not a deal breaker, you can stack shoe boxes on that side. The doors did need adjustment however instructions were very clear on how to adjust door hitch

Great buy, especially for the money! It’s a great entryway cabinet with versatile enough storage for bags, shoes, and enough counter space to get creative with decorations. It’s easy enough to assemble (I did it by myself though you should do it with two people) and looks very stylish. The third compartment is really versatile, we use it to store our work bags. However: be aware that 30 pairs of shoes qty is a little exaggerated, we can only store about 24 pairs of shoes in total (more if it’s sandals), which is still a lot. Also, the handles are a little more orange than expected from the pictures. We will buy some paint to make it a darker brown or black.

Quality: Appropriate for the expected weight load. It will probably not stand up to very heavy loads, for example, stacks of books. But then, this is not intended for books, but shoes, after all. Aesthetics: Although the bulk of it is particle board, it has a pleasing appearance and does not look cheap at all. Design: Very impressive. Good quality for the price. Construction: It does take some time (about 90 mins for me working alone), but the instructions are adequate to follow, step by step. Suggestions on construction: 1) Put this together in an open space, with plenty of room to layout the parts, do the prep work on several of them, and to be able to maneuver around the parts, turn it upside down, etc. 2) Use one or both of the large flat Styrofoam pieces as support panels while attaching the handles and hinges. Be careful not to lay a prepped panel or piece down on any hardware, which could the hardware to bend or even break out of the wood in which it is seated. 3) Rig something soft for the panels to rest on, at exactly 6 inches high, so they are supported while you attach the hinges. I used one of the Styrofoam pieces, plus a 5-inch box. Put all 8 screws in for both hinges on a panel just tight enough to hold the panel from moving away from its supporting part, however, still allowing for fine-tuning its positioning. Then gently lift up the far edge of the panel wiht one hand so it is level while you tighten the 4 outer screws on the hinges with the other hand. Then tighten the 4 inner screws and test that the panel is level, closing flat. Finally, adjust the middle screw of each hinge to offset the panel our or in from its support so it sits exactly where it belongs when it is closed. 4) It was hard for me to figure out at first, but the brackets ("L" in my kit, which is appropriate, since they are "L" brackets) are meant to optionally attach the piece to the wall behind it, for stability. they sit with their open slot along the open areas of the backing. There are two of them, and they allow for nearly two inches of range for the exact locations for such wall-anchoring. 5) It was clear to me how the "L" brackets attached after I reached the end and saw how they worked, so it is a good idea to read through the instructions first. 6) Tools needed: I used a Phillips screwdriver, a soft rubber mallet, and a cordless screwdriver. I would NOT recommend using a power drill, as it would be too easy to overpower the particle board and make a real mess of this build. Even using the cordless screwdriver, I had to be careful not to overtighten, but generally started with that, then drove the final tightness with the screwdriver by hand, being very careful not to over-tighten. Just snug (a "light" hand tight) was sufficient. The cordless screwdriver was most useful in installing the 16 screws into the plastic supports in the back, where it definitely saved some time. The mallet I used to gently seat the top and sides, which needed some "gentle persuasion" as the fit was very tight there and also to make sure the supports were fully seated before installing the shelves.

I LOVE this shoe cabinet. I held off on buying it for a few months because of the price. It fits my needs and most importantly fits a men's size 10 shoe. I love that the shelf heights are adjustable. I had no problem putting it together myself. A few months later I would just warn to be very careful of the cabinet door adjustments. We thought they were clearing the top and bottom but the bottom right was actually slowly scrapping away at the bottom near the center magnetic bracket. Also the top shelf is warped??? See my first picture. Flat shelf out of the box. The top shelf fur us held summer shoes, I'm talking only flip flops but I left a pair of wedges in the center. Be careful where you put your heavier shoes!!

Spacious and sturdy, able to fit a lot of shoes and adds a nice touch to the living room entryway and I also am able to use the other side for leaving out the house essentials ex: umbrellas, pickleball bag, baby diapers and wipes

Product dimensions are absolutely incorrect. This is not 41 inches tall. It’s 44.5 inches without the feet.

My wife loves it. It was a perfect match of our wood but added a darker color. True to color and pictures. I would say it’s a little nicer quality than the Billy shelf from IKEA next to it in the picture. Same sort of install hardware but all metal instead of plastic on the connectors. Doors aligned well. A little thin on the doors but they should hold up to normal wear and tear. Soft closet hinges are a nice touch. My cowboy boots and work boots and rubber boots all fit on the right side. The feet are adjustable so it can be leveled. We like what we got for the price we paid and we’re going to order their side tables so it all matches in the living room. Definitely will need assembly and I’m a professional handyman so it was not an issue for me. My wife assisted me because some parts are easier to assemble with two hands and we got it done in under an hour. Easy build with lots of parts. But if you have built anything from ikea it’s easy.

Stop looking for your new shoe cabinet... this one is perfect! I spent hours and hours over weeks looking at cabinets and I'm so glad that I chose this one. It looks expensive and feels durable & high quality, while still being a great value! It holds a lot of shoes; we have a family of four and it is perfect. It was super easy to assemble - it only took me about an hour and a half. The color and design is gorgeous so it doubles well as a front entry console table. LOVE LOVE LOVE!

Beautiful. Easy to assemble. Fits lots of shoes & I love having the top area to decorate

Took me about 2 hrs to have it assembled. But love the result. Looks sturdy and solid, hope it would stand forever.

We had an opened shoe cabinet prior purchasing this one. I wanted something where all shoes and boots were out of sight. This is really handy. Not only holds shoes but baskets for gloves mitts hats anything really. Looks nice too. Happy with it

Really good quality!!!!

Very nice and easy to assemble. Looks lovely in our front entrance. Holds a bunch of shoes and boots