Mcbazel Arcade Game RGB/CGA/EGA to VGA HD Game Video Output Converter Board For Arcade Monitor to CRT/LCD/PDP Projector

I followed the wiring guide on a blog (Google 'Synchronising the GBS-82XX') and got it working, the video was very dim until I adjusted all three input potentiometers fully anti-clockwise. The OSD was in Chinese but check each option until you find language and set it to English. I have seen a few 'sparklies' on the picture, but these are nothing compared to the blurry picture I had previously with CVBS output. It would have been good if this had come with a wiring guide but the blog mentioned above was very helpful as is a Google search for GBS-82XX.

I'll be using this as a base for a GBS-C build for my retro consoles. My original GBS8200 I bought from AliExpress a few years back (and subsequently stuffed into a drawer untested) turned out to be faulty when I came to build it this week. The cheapest I could find on there after tax and shipping was £27 delivered (and a 2-3 week wait). This one was £21 and change, and arrived lunchtime the next day. Once it arrived I unboxed it (a nice touch) and plugged it in - I'm happy to report that everything is up and running out of the box nicely with this one from Amazon. All the inputs are working as expected (which is more than I can say for my original one, which to begin with had zero output to display, and once I'd got that working recognised no inputs initially either!). So thank you to Amazon and the reseller Mcbazel for a great item that works as it should do, delivered the very next day at a great price! For anyone planning their own GBS-C build, I'd wholly recommend this!

This works great on my Amiga 600. Image quality is very good on any setting I choose on the Amiga. The picture isn't quite filling the screen is the only slight gripe but for the money it's great! There's 3D print designs in Thingiverse too.

I had an old JAMMA game PCB that had RGBGS output for picture. I used this converter board to get a picture to a HDMI monitor, worked well ages a bit of set up. Also used it for VGA and that worked straight away.

I needed a way to get my BBC micro and Master to work with a modern SVGA monitor. I had tried a few of the boxes advertised on Amazon, but they didnt work.. I think I was going to have to spend a lot of money to get this to work that is until I found this. Cheap and with a bit of knowledge, soldering 6 pin Dins, it works. Happy days. Going to see if it will work with my Commodore Amiga 500.

This worked well almost out of the box (except it didn't come in one) on my Amstrad CPC 6128. All I had to do was press the SW button until I got the picture. Nice clear yellow on blue screen, just as it should be. Please note that you can't do this with the OSD on. You might need to fiddle with the horizontal and vertical controls on the monitor to get the picture nicely centred. The connection from the CPC to the McBazel needs a special din to vga cable. You can make one up, but I chose to get one from the helpful people at CoolNovelties.co.uk.

Produces a very nice display, even on mode 0. Game movement is probably as good as you are going to get due to frame rate conversion. Very playable and no problems. The initial settings needed a small tweak (mainly the V size needs increasing to remove the artifacts at the bottom). Very handy being able to alter the height, width, top and left positions - well suited to fitting the BBC micro screen nicely on a monitor. No sparkles or whatever - a nice clean display.

Don't expect this to work with your Atari/Amiga, it will require further modifications to work. Returning mine.

Fungerar jätte bra! Lite svår att förstå sig på i början. Men det finns guider på youtube. Man kan med lätthet få bilden precis vart du vill ha den på skärmen. Perfekt om du skall använda ett gammalt pcb med en ny lcd skärm. Men även bra att ha om du skall installera en 60 in 1 eller pandoras box.

Easy to set up and worked great for converting a Pac-Man arcade CGA video signal to vga output to a monitor!

Connected to amiga 500. used online guides to get RGB connected to the computer. took some time scaling the unit and the overscan on the a500. turns out to be a decent interface. worth the $

Bien embalado papel de burbuja y todo nuevo nada usado o revendido o de una devolución ni nada todo como de la fábrica a mi casa todo perfecto

Habe es mit einem ESP8266 zu einem GBS-Control umgebaut und verwende es mit der PS2, funktioniert echt gut. Bei den Einstellungen muss ich noch ein wenig "herumschrauben", aber ist auch mit den GBS-C-Standardeinstellungen sehr Brauchbar. Achtung, es ist kein HDMI-Ausgang dabei, dafür benötigt man einen aktiven (mit Strom von USB) VGA2HDMI Adapter oder Kabel. Und nochmal Achtung, man braucht ein Component-Kabel (Grün/Blau/Rot / Rot/Weiß), das Composite-Kabel (Gelb/Rot/Weiß) funktioniert nicht.