Sword and The Stone Tailgate Wrap Vinyl Graphic Decal Sticker Wrap

Description

SIZING: The measurements of this graphic is 66 inches by 25 inches. This will fit MOST pick up truck tail gates. Even if it is listed as fitting your truck PLEASE MEASURE YOUR TAILGATE BEFORE ORDERING to make sure the size provided will work. WE CAN NOT ACCEPT RETURNS OR EXCHANGES DUE TO SIZING ISSUES. This is a UNIVERSAL decal. If it needs to be made a different size please contact us BEFORE buying and we can usually size it to your needs for no extra charge. INSTALLATION INSTRUCTIONS: (1) Clean surface of any dust or debris. Alcohol is recommended. (Make sure surface is DRY) (2) Place decal on a flat surface face down and peel off paper backing, *IMPORTANT* Avoid letting the decal to stick to itself (3) Pull slightly tight, and LIGHTLY stick the 4 corners of the decal to the desired location ( this may be easier with two people) (4) Squeegee the decal dwon (using the supplied squeegee) working from the middle out. (Try to avoid bubbles and/or creases). (5) Trim the exess material off along the edges of the tailgate with a razor or hobby knife. (6) Heating the decal after application with a heat gun will aid in application. TIPS: This decal MUST BE APPLIED DRY for the air release technology to work correctly (No wet application). Badges/Emblems must be removed and porperly cleaned before application, please research how to remove these items or seek the help of a body shop. Application will be much easier with the handle removed as well, but a professional should have no problem with it left on using a heat gun (This is optional). Bubbles larger than a quarter may need to be popped with a pin or razor to aid the air lease. Do not force them down. Please do not hold the seller accountable for installation errors. Professional installation is always an option at your local sign shop. Feel free to watch some videos on YouTube of vinyl wrap installations for additional guidance.