Bath Mixer Tap Easy Fix Fast Fit Kit Quick Release Fittings Fixings Chrome Brass

These are brilliant if you want your bath tap against a wall . They allow easy access for maintenance or if you want to replace the tap .

Having had a new bath fitted, the plumber suggested this.Just what we needed to help replace/ fit the bathtaps because the taps are against the wall which made this abit of a tricky task to get too.Thank you great purchase and fast delivery. Would recommend seller

The components and build quality are good quality, however, once fitted the outer shroud cannot be tightened more than hand tight leaving your taps very sloppy and if like mine you are using a shower mixer it will lean forward creating a small gap between the shroud and bath leaving it exposed with water able to ingress under the bath. Unfortunately, you are unable to tighten as no tap spanner is large enough for the diameter of the nut (which must be 50mm +) Mole grips and the like are of no use because of the lack of space (which is the reason I bought these in the first place) I contacted the supplier who replied with:HiKindly find the fitting instructions attached.This should help fix it properly.If that does not help you will have to look in your local DIY store and see if there is anything available as we do not sell any spanners.RegardsEplumbshopthey were very prompt with their reply, however I own pretty much every wrench and spanner going and as mentioned above there is no space to use them unless you are able to apply huge forces with your fingers (in which case please come and tighten mine) steer clear of this product.

Great product, fast delivery. Used in a bath where taps are against the back wall. These will ensure I can access the tap fittings for maintenance in the future

We used this item when fitting anew bath. Easy to use , easy to fix, overall very pleased with my purchase

After breaking the tap on the bath, my plumber told me to order these, and they've worked a treat, so very hally with the results

Used to fit a pair of taps in an awkward location. Worked well. In fact why not fit all these to new taps as I am getting too old now to get under baths now days. Would make life a lot easier.

We really loved the idea of these easy access taps, but they have the size all wrong? we had a standard shower mixer unit on legs from Victorian plumbing, and a steel bath, butt he holes for the steel bath are 32mm- perfect for the tap hole, but too small for the 42mm diameter threaded part of the easy tap. that meant we couldn't use this at all. so unless you have a bath with 42mm holes for the taps, or your plumber is making bespoke holes, this is not the right thing to be using.