Wireless Doorbell with 2 Plug-in Receivers JVSURF Waterproof Cordless Doorbell Chime Kit with 900 feet transmitting & 52 Chimes, 1 Push Button, 2 Plug-in Receivers, White

Description

How to set chime 1. First choose desired ring tone by pressing Music Control Button. 2. Next, set receiver into learning mode by pressing Volume Control Button on the receiver for 5 seconds until it starts flashing and makes a sound to indicate ready status. 3. Pair transmitter with receiver by pressing the button on transmitter; receiver will sound the ring tone you choose after getting signal; trigger again to confirm the setting. 4. Finally, exit from learning mode by pressing Volume Control Button for 5 seconds until blue indicator in receiver stops flashing. Or you can unplug receiver to exit. 5. Repeat the above steps to set another receiver. Clear all memory settings Press Music Control Button for 5 seconds, then all settings can be cleared up. But receiver will automatically connect with the first transmitter you trigger and sound default ring tone-Ding Dong. Note - Please do not install transmitters on metal doors since metal is not easy for the signal to transmit. If operating range is short, please change the location of installation. Specification Voltage of Plug-In Smart Receiver: AC 110V ~ AC 220V 50Hz/60Hz Battery in Transmitter: 12V 23A Alkaline Battery Power Consumption (Transmitter): Wireless Range: 900 ft in Open Air; 100~500 ft w/ Metal Security doors and Walls Selectable Ring Tone: 52 Options Volume Range: 4 Levels (up to 110 dB) Expandable to Multiple Smart Receiver or Transmitter: Up to 50 Working Frequency: 433.92 MHz±280KHz Working Temperature: -30℃~70℃ Package Include 1 X Transmitter 2 X Receiver 1 X 3M two face tape 1 X Screw set