Royal Gourmet Dining Cart Table with Double-Shelf, Movable Stainless Steel Flattop Grill Cart, Hooks, Side Handle, Multifunctional PC3401S (Silver)

Super sturdy and exactly what I wanted for our small grill. The directions were very clear and most importantly, they provided extra screws, washers and clips for every accessory. Amazing! Everything went together seamlessly exactly as described. It took me about 1 1/2 hours and I could have used an extra hand to hold up the middle shelf when screwing it in - but other than that, exceeded expectations. Easier than any IKEA project by a long shot. Thank you!

This product as described online was the perfect solution for us. But the major hesitation was so many references to issues with assembly. We expected a major challenge; but it did not turn out to be nearly as difficult as we'd imagined. The instructions are indeed very brief, consisting of a series of well-marked diagrams. But no real word description that would have been very useful. We found the extensive six-step "instructions" provided here by another viewer to be a critical part of understanding (in words) how things were to be put together. If you first check out the parts list, you'll become familiar with the various pieces. Then keying off of where the threaded holes are, things begin to make sense. It is crucial to get the four legs started correctly, with the threaded single holes at the top of the 4 legs (which is the bottom of the cart as you put it together upside down). The reference is to have those holes facing "out" -- but to further define that it means "out" to the front or back of the cart -- not out from the "ends" of the cart. Installing the two cross braces and one longer brace was easy once we figured out that the longer brace ends were actually overlapped by one end of each of the cross braces. None of the instructions is clear on that point, although in fairness the illustration appears to show it. A major key is to keep most of the screws quite loose until after you've installed the bottom shelf (which as you're doing it upside down is of course on the top). That's the only way you'll have enough sway on the four legs to be able to fit the bottom shelf to the four legs. I would rate our skill at putting together things like this perhaps a 2-3 on a scale of 10. So these words are intended for those potential purchasers that might suffer from a similar disability. In that regard one final comment: When all is assembled, you finally get to put the wheels on. But at the very end the axle is then held in place, wheels on, by a cotter pin. There's no way most human fingers can push a small cotter pin through a tiny hole at an angle unless you have steel fingers. It turns out that by using a small screwdriver to hold the cotter pin open as you insert it, that final obstacle to success is easily overcome. Again kudos from prior reader comments on the assembly process. Especially the "six steps" spelled out nicely in an earlier review. We hope this slight embellishment might add to the very good advice you'll find there. And when it's done, you'll find you have an extremely sturdy unit that seems fully fit for long term outdoor duty.

It looks nice but quality is sort of questionable. Very thin, sheet metal construction. The box frame legs started to crush when tightening the bolts, that was alarming. None of the bolts use washers when they REALLY should. The entire thing rattles when you roll it, despite every bolt being tight. Wheels are cheap plastic, so I might replace those. The instructions are not the worst I've seen though. It came with a few spare bolts and a spare cotter-pin for the wheels. Came well packaged. That's all good news. It does look nice too. Plenty of storage space underneath. Matches well with my blackstone, and once its all together, it feels moderately sturdy. At least enough that I'll give it a go for my pizza oven. Will update if it falls apart over the coming days.

Fits the Halo Versa 16 pizza oven nicely. Very easy to put together as long as you look at the diagrams closely to see the position of pre-drilled holes in the various pieces. Overall it seems very sturdy. I left the wheel caps off as I thought they were dumb, but overall I am pleased.

This is nice looking, sturdily-built dining cart for use in outdoor cooking! All the parts are made of quality metal parts except for the wheels. Assembly was extremely easy and all the pieces fit together without a struggle. The parts were all labeled properly and organized into a tray that was labeled well to fit with the instructions. We couldn't be happier with this cart and looking forward to using it alot!

This is a great cart, not flimsy, easy to put together, but I needed an extra hand a couple of times. I bought it to use next to my weber charcoal grill and my gas grill for extra counter space...it is great! It gives me so much more extra space to store and to hang tongs, spatulas, ect. I love the wheels and handle if you need to move it. I also bought a cover for it. I highly recommend this cart, it expands your work space for grilling, and it also has a place to put a gas tank if you want to put a grill or pizza oven on the top shelf.

After reading some other reviews where people had difficulty assembling, either these people really shouldn't do this kind of work, or maybe back then the directions were not clear? I downloaded the PDF instructions from this website, and found directions to be clear as day. Even better than the printed pictorial directions in the box. Between the two, as long as you are good at following directions and observing orientation of parts during assembly, one person can do this no problem. It would help to have a 2nd person hold the support braces and bottom shelf while driving fasteners in, but I'm stubborn and did it all myself not wanting to wait for wife to come home. Recommend assembly on a soft, carpeted floor so SS top doesn't get messed up. So the parts are all labeled very nicely, with perforated cardboard backing to easily remove same from hardware packaging. No need to use sharps to open, but you lack the excitement of slicing yourself doing so. A welcome change in packaging. In fact was packaged SO good, it took me about 5 minutes to remove the protective sheeting on the SS top, maybe it was too cold? It was a clingy material that clinged a little too well! This was purchased for my 16" wood fired pizza oven, which is almost 50 lbs, and it feels rock solid on this cart. I bought a cover on Amazon for it too, as I plan on keeping this on deck except for winter. Now, if we could finally get a normal temp day here this winter, I could finally fire up the oven! Edit: After using this cart 2x, the side handle used to lift end with no wheels broke off on one end. Called Amazon, they couldn't do anything but initiate return. Called 800 number for manufacturer in Georgia on front of owner's manual, they sent me an email to complete and will hopefully ship a new handle soon. The welds holding the handle bolt receiver broke (guessing they were welds), hoping I have better luck with new handle when it comes. Cart still usable without handle.

This cart is well designed, sturdy, and well built. It was easy to assemble, taking about 20 minutes. It does not include tools, but only needs a Phillips screwdriver and an adjustable or 10mm wrench. the top is smooth stainless steel, wipes up easy after it has been coated with grease, sugar, spices, or whatever. It has a 20 gallon propane tank holder, and several utility hangers for utensils. It is great as a prep table, a work table, or just a place to set your beer while you cook. It is easily moved on paved or smooth surfaces.

Schnell angekommen...war leicht zusammen zu bauen...ist robust und gut verarbeitet...dient uns als mobiler Grillwagen...muss mir etwas überlegen, da die Tischfläche zu rutschig ist...ich würde ihn wieder kaufen👍

Utilisation pour un four à pizza au propane.support pour bonbonne bien conçu et hauteur de la table parfaite.

Total schöner Wagen, Aufbau problemlos. Sehr stabil. Nur der Haken gür die Gasflasche passt überhaupt nicht. Unsere Gasflasche (Normgröße) passt da nicht dran, steht jetzt eben unten drunter.

chariot robuste avec roues pour déplacement facile avec support pour 20 lbs propane , facile à nettoyer, convient très bien pour mon petit four à pizza.

Not the easiest to assemble for one person, but do-able. Instructions could be better. It's sturdy once assembled and it looks nice next to my BBQ. Nice and high too for my pizza oven.