Crystal Clear Epoxy Resin Kit 2 Gallon Self-Leveling Coating and Casting Resin, High-Gloss & Bubbles Free Resin and Hardener Kit for DIY Art, Jewelry, Table Top, Molds, Wood 1:1 Ratio

Easy to use pump bottles, dries hard & clear, have made dozens of things out of what was in these bottles.

I was about to quit playing with resin after going through way too much money and ruined products because of other resin types. Then I tried this one and "I'm back in business, baby!" It does need a bit of work, but the results have been a resin that release the bubbles better than anything else I've tried, so to my fellow newish resin enthusiast... Here's how I've had best success: 1) Measure the needed amount of each into separate cups (I use reusable hard plastic ones with lids, so I have less trash waste) and place them in some warm (not hot) water for 3-6 minutes depending on the amount. 2) Mix the A+B resin in a new cup. I use an electric resin mixer and it does have to be mixed a bit longer than other ones - really look for those stringy part in there! 3) Place the cup back into the warm water for 3-5 minutes. 4) Pour slowly and then use a toothpick or craft stick on the sides of your product to make sure no bubbles got stuck there. And remember, the deeper the project the harder a time bubbles have releasing, so work in layers if you must. 5) Do your usual heat gun/lighter tricks, and voila, you'll *most likely* have a nice mostly bubble free result! One last thing... This is a lower viscosity resin and works great in molds, but I found that it really wants to fall over the sides when used as a top layer on coaster for example (even after a 15-20 minute work time), so you may want to use it as the bottom layer and then top coat it with a thicker working resin or wait long enough till it's thickening up a good bit itself.

The best resin out there. And the BEST customer service! I went back & forth with them on issues I was having, that had nothing to do with their resin. But they helped me troubleshoot and gave many ideas to help me figure out my issue. Then sent me free resin. They didn’t have to do that. My issue was not the resin & I appreciate all the help so much.

Very easy to work with, but still get bubbles.

When I first started out creating resin art pieces, I went through several brands of resin - some would bubble more than others or smell really strong. This brand has been the most affordable, least fragrant, doesn't get bubbles as bad as other brands (make sure the room is warm enough - if it's cold, any resin will bubble a lot). I've mixed with glitter, sand, dyes, pigments, mica powder, sea shells, sand, etc. and had no issues. I have purchased a lot of resin from this brand and will continue to!