Headset Earcup Parts Yokes Bails Stirrups and Screws Compatible with Bose X Aviation Headset A10（A10 KIT- Both Sides）

Fit and work great

It feels stronger than the original product I’ll get back with you if there’s a problem.

Do not buy Terrible fit, poor craftsmanship and it will not hold the headset pieces together.

I somehow broke one of the earpiece brackets on my Bose aviation headset, so I order these to replace the broken bracket. The items came pretty quickly and they will fit the need, but they are definitely not OEM-like parts. These are obviously injection molded with several "molding artifacts" of pieces of plastic sticking out at the mold edges. It took quite a bit of work with a sharp knife and a dremel tool to clean up the rough edges that prevented the attachment of the bracket to the headset on the axle pivot. I eventually got it to fit and it seems to hold securely, but the cheap look of these brackets definitely lowers the sleek and professional look of the Bose earset. If you can't find another solution, these will work, but expect to do a bunch of clean up and trimming on the parts to get them to fit.

You can see the slight differences between the black stirrups of this product the lighter gray stirrup of the original Bose headset. It will not stay connected to the main part of the headset. And the syrup is missing a small plate that helps hold the wire as it’s tucked into the stirrup.

Looks like they were printed with a 3D printer, but they fit perfectly.

Exactly what I needed to repair a broken headset connector.

This is a poorly copied 3d print. Poor fit, disassembled mid-flight; In a helicopter without doors, so it posed a serious safety hazard. Grinded it then with Dremel, will see if it would hold.

Gleich wieder zurück weil nutzlos. Zum einen sind die Bügel so steif, dass sie nur mit Schwierigkeiten über die Ohrmuscheln passen und beschädigungsfrei montiert werden können. Was aber viel problematischer ist, ist die Tatsache, dass den Bügeln die Führung fehlt, um sie sicher und dauerhaft am Headband zu montieren (siehe Bilder!) Die Ohrmuscheln rutschen daher immer wieder aus dem headband heraus und machen den Austausch völlig nutzlos. Also: Finger weg!

Do not buy this product. It is very cheap 3d printed item. While it will work in a pinch, be prepared to do some filing and manipulation to get them to fit.

Good alternative to the original Bose supplied items and very strong but moulding quality not great.