Kalinta No Seal Reusable Epoxy Mold, 19x11x3 Inches Large Resin Mold for River Table, Cutting Board, River Coffee Table, Resin Art, DIY Art Home Decoration

Way easier than making forms.

Love the mold used few times now i definitely forgot to use release spray and still had zero issues demolding which was great

I wanted a good mold to make several cutting boards and serving trays. I read several low ratings complaining about difficulty releasing their project which caused me some concern. I made sure the mold was clean and that I used a release agent before pouring resin. I have experienced no problems whatsoever getting my projects to release. Typically three or four taps with the included rubber mallet and the project releases. The mold is rigid and there has been no warping with any of my pours. I was so pleased with my experience; I bought another larger mold to use. They are priced a little high, but I have used my first one five times and it still looks new. This may very well be a case of you get what you pay for. I think you can buy this product with confidence.

So the form is pretty solid, I used release spray and it came out fairly easy, the only problem I had was that I elevated it on 2 2x4 runners so I could clamp the wood into the mold and I didn’t realize until an hour later that the weight of the resin caused it to bulge at the bottom. I didn’t think I would have this issue. Now I know to use a sheet of plywood under it and it should be find. I was able to reinforce it underneath to level everything back out but that is my only complaint. Otherwise it is a great mold and I will buy more.

I don't know why I didn't buy this years ago. By the time you spend all that money making one out of MDF you should have just bought one of these. I love the easy setup and clean up of this and I look forward to many more uses. My only regret is that I didn't buy it sooner

Love this more than ever!!

Just used this yesterday for the first time. A nice sturdy product and we will see what happens when we go to remove the pour.

Well there are several issues. 1 it has way too much draft. The angle of the sides is so extreme that the resin flows past the material unless you cut the material @ 5 deg. But you can't do that very well if you have a wide piece and a live edge. What this essentially means is you do have to seal this, you just seal the work piece to the mold which means more work after demoed. I guess you can just let it go and cut the whole thing down but again thats more work. Problem 2. This is molded thermoplastic meaning it is not HDPE or pfte so the epoxy does stick to it without a heavy coat of mold release, additionally since it is thermoplastic the heat generated by the resin actually effects the shape. So if you shim it to achieve level one side ends up with a 1/16" to 1/8" bowl shape to it.... so again more work for you. I assumed they did this to make a mold this size more cost effective but it really doesn't effect the price enough to justify the bad ideas behind it. yes you can overcome its shortcomings but the savings of 30 to 40 over a custom built HDPE mold is quickly overcome by the large amount of resin waste associated with the design. For 1 project I guess it's probably a wash but 2 or more forget about it.

Very happy, can't wait to use it.

Love this tray. Very sturdy. Easy to clean. I spray silicone release prior to resin. After 3 days, use the rubber mallet to tap all around outside of tray. Turn upside down and POOF you have a perfect item! Will stand many uses

Die Form ist komplett verzogen, somit nicht im rechten Winkel... hat keinen ☆ verdient! Leider was teures für die Mülltonne gekauft. Ärgerlich da die Rücksendung nicht mehr geht.

Gefällt mir!!

Un po deluso dalla qualità e dallo spessore, sembra un vassoio per metterci i panetti delle pizze, per il prezzo pagato pensavo di ricevere qualcosa di professionale. Proverò a utilizzarlo ma se dovesse dare problemi farò di sicuro il reso