C-Tec Power Grab n Bond TRIBRID® Construction Adhesive - 290ml

So far, really strong and well binding. Depending on what you are putting together, it may be worth doing it in stages. For example, I tried to use this to fix a reverse camera on the windscreen, but found that due to the weight of the camera and small mount, I needed to fix the mount itself first and let it cure, then I could fix the camera. It is also a revelation that once you have finished using it, you can just squeeze a little bit out of the tube and let it cure. When you next need it, pull that off and the tube is ready to go. No more blocked nozzles! Also, as it is very thick, let the tube warm up first before using it, either in warm water or on a radiator. A previous comment mentioned that it was impossible to get out of the tube, but their website mentions about let the material warm up first before application. Will only buy this from now on!

This CT1 Power Grab and Bond is a brilliant adhesive for pretty much anything. I used it to adhere some rain covers to protect vents from allowing water ingress. The vents are in slate so drilling was not a viable option. Be warned, if you have a chewp caulking gun this product will bend it. I had to use both hands and really squeeze hard to get it to flow, and that was with the nozzle cut to 10mm opening. The grab is near instant, just apply it thick. Yes it’s expensive but it works. Apply a good amount of pressure once surfaces are together to further set the bond. Dried nice and quick, but it doesn’t really matter about drying times as it functions in the wet anyway!

Bought this to fit skirting but was a bit too thick and had a nightmare to get it out of the tub (maybe a faulty one?) didn’t really last long but dam does it stick. Ended up using CT1 to complete the job but this stuff can stick.

Bought to stick down a patio slab that was loose before repointing. Let it dry for 24hrs and was stuck solid. Saved chiseling out mortar bed etc. Quick and easy to use. Not cheap but hey........ if it works it worth it

The best power grab I’ve used, so so strong !!!!! Brilliant stuff Thankyou.

If you want something that sticks, and fast, then look no further. This has incredible bonding power but with the flexibility to allow the surfaces to be easily positioned before it sets. I bought it to fix a metal runner with weather seal to the bottom of my garage doors. It worked a treat and without the need for screw retention, which was great as there is very little room at the base of the door to position the screws. The runner and seals have now been in place for over a month and are showing no signs whatsoever of coming adrift, which speaks highly of the product as the seals are a very tight fit against the floor, which must put pressure on the bonded joint. I hesitate to say that any product is the best in class, but on this occasion I have to say without reservation that THIS IS THE BEST!!! UPDATE - Its now August and some 8 months have elapsed since I completed my initial review. I am very pleased to say that the weather seal at the base of the garage doors is still held firmly in place and shows no signs whatsoever of movement despite the fact that the doors have been opened countless time. Not only that but the seals drag against the ground as the door opens which puts further pressure on the bond. I have also used the CTI in a number of other applications and it really does take some beating.

I needed an adhesive to fix a heavy marble fire backing to the wall . I searched the web for ideas what to use and after watching a video on you tube about it's uses thought I would give this a go. It was quite thick coming out of tube and I thought 1 tube might not be enough, but for my job it was just. I then positioned the fire surround in place to get the gap between backing and surround right. I then left it in place and rechecked it 1hr later, it has moved very slightly so I moved the surround out of the way to move the marble backing forwards a fraction but it had set and I mean not going anywhere set. This was ok as the amount it had moved was not noticable so be aware this product is serious stuff and what ever your using it for get it in position quickly.

I used this adhesive to bond together granite slabs. It did this superbly and gave an amazingly strong bond. My biggest problem with this product was trying to get the product from the tube. It fits a standard cartridge dispensing gun fine but the product has an extremely dense/viscous character and it preferred to ooze out of the rear of the tube rather than the nozzle. I ended up removing the supplied nozzle completely and using a spatula to smear the adhesive to the granite prior to bonding. So, fantastic bond strength but difficult dispensing of the product in my experience. Now, to get the damn cartridge from the gun!

Sinceramente l' ho adoperata solamente per attaccare legno e ferro, l'ho trovata molto elastica ma molto aderente, ci mette molto tempo per tiraggio, quindi si ha la ampia possibilità di lavorare con tranquillità, non adatta secondo me per attaccare materiali che necessitano di un tiraggio veloce

Guter Preis, schnelle Lieferung

Works as described.

Lo he usado para pegar materiales de construccion y pega bastante bien

Produit exceptionnel qui fait vraiment bien le travail. Je l'ai utilisé pour fixer des blocs de pierre blanche sur un mur de béton pour former un pilier et des balustrades en fer. Lien exceptionnellement fort et très sécurisé.