[2 Pack] Vonpri Flashlight Holder, Mount Bicycle Mounting Bracket Flashlight Holder Torch Clip 360º Rotation

Good quality mounts for the price, holds my SK68 flashlights well. Feels durable enough for the purpose its built for and uses metal in all the right places. The rotation at the joint of them is sturdy. Grabbing another set of these in orange for other projects. There's probably better ones out there that are full aluminum but these are plenty good enough.

Nice and cheap. Do hold single cell 18650 and 26550 flashlights to the fork of my bike with only simple modifications for the latter. Plastic inner shims kinda stiff and difficult to click into place, helps to warm them up a bit and apply a non petroleum based lubricant (I used refined cocoa butter, worked like a charm.) Can be ratcheted on the fly in ~ 8° intervals to direct a flashlights beam to the desired angle of attack. Quick release levers kinda fiddly and metal hardware seems to be chrome plated steel which rusts a bit with prolonged exposure to the elements. Update: For use with single-cell 26650 flashlights, recommended to open the channel-locks all the way and switch out the thick default click-lock shims with the single pair of thinner ones you’ll find loose in the box. These lack prongs to hold themselves in place when the clamps are opened, so my advice is to line with 3M VHB™️ double stick tape, trimmed to fit as shown in pic. The 3M sticks a lot better to its own plastic backing and to your fingers than it does to the shims so is a real PITA to work with but still worth the effort for the amount of frustration it will save you in the long run. Bonus, thickness and compressibility of the tape increases spring in the clamps when tightened around a flashlight, making the QR levers a lot easier to operate. If you’ve already lost the spare shims though or need better grip and compression around your flashlight, another alternative is to cut your own from 3M Electronics Self-Stick Rubber Anti-Skid Pads — marketed here on Amazon under the brand name ROOS. Their resilient composition, super sticky adhesive backing and grippy siliconized surface lend them ideally to this purpose. Just slice into strips 3/4” (20mm) wide and cut tabs/notches to match the interior halves of the clamps, peel off backings then press into place (see pic.) Easy-peasy. Do wish a similar mounting bracket were available in aluminum alloy with siliconized rubber shims, would gladly have paid triple the cost here for a higher quality device. Still, not bad for the price, especially with above mentioned mod.

Excellent multi purpose connector. Very good quality for the price point.

It’s plastic looks like metal.

Pros: Works incredibly well, VERY sturdy plastic-like material; versatile. Cons: My only negative is that after a few weeks of use in the rain, the screws are beginning to rust. I'm going to add some oil or grease to the metal pieces, which should help keep these from oxidating further. All and all, I'm very happy with this product.

Love this for flashlight mount on bike, good price and easy install

These are not suitable for most bikes, IMO. The "rubber" shims aren't rubber, they're a semi-stiff soft plastic and don't prevent the clamp from slipping and rotating on the handlebar. Bikes vibrate. This clamp will never stay in place unless you add your own grippy shim material, like actual rubber from an old inner tube. Meanwhile, these are not even remotely "quick release" clamps. While the lower portion is intended to remain on the handlebar 24/7, the flashlight will need to be removed after most trips and locked up, so a true quick release solution is required. This clamp requires much time-consuming fiddling and turning and tightening to get a flashlight in or out. Two major fails which makes this clamp useless to me. The plastic seems durable, though, and I chose this clamp due to it's ability to rotate at the joint in the middle btwn the upper and lower clamps so that you could fine tune the flashlight's aim on your path ahead. But if the lower clamp won't clamp and you can't conveniently remove the flashlight, what is this for? If your handlebar has a rough finish and you won't be removing your flashlight frequently, this might work for you.

I actually used these to mount a flashlight to my disc golf cart. At first I was disappointed they were all plastic and the orange pieces weren't already built into the inside of the clamps. After multiple uses these clamps hold up pretty well! I love the adjustable hinge. It really enables you to put them on many sizes of flashlights and poles. To stop the orange inner clamp pieces from shuffling around when opening the clamps, I left them shut tightly on the disc golf cart and a flash light. A couple of days later I opened the clamps and the orange inner grips stayed in place from having so much pressure on them for an extended period of time. I would still recommend to be careful when opening the clamps. The inner grips can run off pretty easily. Another thing about the orange inner grips is they aren't very grippy! Even at the tightest setting the clamps easily slides up and down the pole it's mounted to. I haven't had many problems with this, since it takes a little bit of force from your hand, but I just imagined it would be better. Bikers trying to use this would definitely have a problem with these shifting when they hit bumps. You can only tighten a full plastic clamp so much. In summary, know that it's all plastic, the orange pieces don't grip very well and run off on you, they are pretty durable for the price and being made of plastic, and they are e quite universal and inclusive. Overall glad I tried them and will continue to use then.

No son prácticas ni dan seguridad a lo que sostienen. Cumplen su función, las gomas de agarré vienen sueltas y es lo que las vuelve inseguras, tienes que ponerlas con mucha calma y cuidado para que no se salgan las gomas de agarré o mejor no usarlas.

Très bon support pour lampe de poche, qualité excellente. J'ai été surpris de voir un support ayant une telle qualité à un prix aussi bas. J'en avais acheté d'autres sortes ailleurs, moins bons et plus dispendieux. J'utilise ce support pour fixer deux lampes de poche de tailles différentes sur le vélo. Le support s'ajuste vraiment bien à différentes dimensions, il s'attache très bien au poteau du siège, au poteau du guidon ou au guidon lui-même. Ça vient avec des coussins de plastique souple de 2 épaisseurs différentes, et la fixation est munie d'une longue vis pouvant s'adapter à différents diamètres. Également, sous un des coussins en plastique il y a une vis pour ajuster ou bloquer la rotation "360 degrés" en positon voulue. Parmi tous mes suports pour accessoires, celui-ci est le plus polyvalent et le plus facile à installer et ajuster en place. Attention : Il faut insérer soigneusement les coussins de plastique souple dans les encoches du plastique rigide avant de débuter l'installation sur le vélo, à la réception les coussins souples ne sont pas bien enfoncés dans les encoches.

Good product. I gave it 4 stars because it's not usable for attaching flashlight to the seat to face backwards. The design does not allow to be configured in the way to attach flashlight facing backwards, other than that, if you need it only to face the front, it is very good item

These are fast to install and uninstall great hold great for my mountian bike comes with 2 if one was to break which I dont see how or you could use the other one to mount a light to your hunting rifle or shot gun if it gets dark and your on your way back to camp. I was told u cant mount Flashlights to guns when hunting so check your local laws. Also my mom has a walker I may use the second one on it if she goes for a stroll at night

Metal parts will rust so take it in (easy) when not in use. Orange parts faded, not a big deal, works well especially for the price. considering buying more. Versatile aiming as you need it, as opposed to simpler ones that don't adjust much. Can mount on front fork, handle bars or back of bike for taillight. Can have one pointed to the right to keep an eye on the ditch if you like. Overall good product but I'd be willing to pay the difference for stainless steel metal parts. Wish they would offer that.