33700 Metal Cleaner Polishing Compound Paste to Clean, Polish, Shine and Protect Stainless Steel, Silver, Chrome, Fibreglass and Ceramic, 250ML

Amazon delivered 3 items in very good condition the day after I ordered them, even though I didn't use Amazon Prime. The 'Peek compound' was in a tin sealed in a plastic coating - this was also intact and easy to remove. I would say, if you have any issues with your hands/fingers (e.g. arthritis) this may not be the product for you. Opening the tin is similar to varnish/house paint as it requires you to lever the lid off. I used a spoon handle, but anything sturdy will do - I'd avoid scissors though!! Although other reviewers noted the product had a chemical smell - which it does. I didn't notice it once I began cleaning. What surprised me was its colour, blue - unexpected, rather nice. 'Peek Compound' is very easy to use, I either dipped a cloth in it, or dipped the actual item in it. It does a great job at cleaning - immediate results, and it's not greasy. There's plenty of it as well. As far as I can tell there is only one other minor negative. 'Peek Compound' doesn't clean small or difficult to reach areas very easily - that may also be due to my big fingers of course. Try other products such as foam, dips, or a combination of products which suit your requirements. Cotton buds dipped in 'Peek Compond' may work, but I didn't try that so can't confirm it. In my photo's I cleaned an old copper coin (yes I know your not supposed to do this). I used a sonic cleaner (rubbish), then Peek Compound (great results), and finally used the drill buffers (almost as good as new). I'm a miser, always buy the cheaper cleaning options first, saves wasting money. I use friends/family and website reviews, but check they're real not adverts. 'Peek' is also VERY easy to clean up afterwards. Washing up liquid and a clean cloth did it for me. I recommend washing whatever you are cleaning in mild soapy water after using 'Peek Compound', to remove any hidden residue. Especially if you are going to buff the item with a drill attachment polishing kit. Saves the drill bit getting covered in cleaning compound. Finally, yes - I would recommend 'Peek Compound', but use other products with it if they are delicate or have tricky areas to reach.

I had used a well known brand of chrome cleaner & polish on the unlacquered alloy wheels of my Piaggio MP3 scooter, but the tube ran out before I finished the job. I have used countless tubes of this product for 50 years and have never used anything else, having believed that it was the best. I decided to try another product, to compare the 2 and see if I could do the job with less elbow grease in a shorter time. I read various reviews of products for cleaning & polishing chrome, alloy & stainless steel and I chose Peek 33700 as being the most suitable for my requirements. I opened the tin, to see a light blue coloured, thin paste, which did not feel at all abrasive - not going well, so far, I thought. Well, this was the only polish that I had, so I put some on a damp cloth and started rubbing. In a few minutes, with several dabs of the cloth in the paste, the cloth turned black and the alloy started to shine. I finished all 3 wheels and looked at the results of my afternoon's work. To be honest, I didn't think that there was any visible difference between the results of the 2 products or that either product took less time or effort to achieve this. I then used the Peek 33700 on the stainless steel silencer & exhaust pipe. In a very short time, the metal was gleaming, the polish having removed all the surface discolouring and tarnishing. The wheels could do with another cleaning & polishing session, as the corrosion has not been completely removed. Pros - produces a good shine, doesn't damage the alloy wheel and a 250ml tin will last a long time, even with my extravagant use. Cons - none that I can think of. I can recommend this product's use on stainless steel and alloy - I was advised by a mechanic friend to first attack the alloy with very fine wet & dry paper, to remove the surface corrosion, before using the paste. I have to admit that I didn't feel very confident taking his advice and I have given myself more work, but the results have exceeded my expectations. A great product, in my opinion.

Does what it says on tin

I know this isn't the most exciting topic but I have to say i was fairly excited to see how amazingly well PEEK polished some old silver coins of mine. It has worked brilliantly on the old tools I am refurbishing. I can't compare this to any other product as this is the only one I have used to clean metal. There is plenty of contents and I expect it to last a long time. It is also very easy to use, use a rag or brush to use it and another rag to clean and polish - make sure you read the instructions about health and safety before proceeding to use it.

Peek is an excellent final polish agent, puts the gloss back on many surfaces. It also smells like it has some ammonia and can lift some grease, so it is excellent on stainless steel sink-tops and car bright-work. For best results be generous with it, add water to carry away detritus and stop it drying out and rinse polishing cloth frequently. I only had one use, at first. After seeing how well it works, other applications are popping up. My rather nice old non-stick stainless steel omelette pan from JL was losing its non-stick, so power drill application of wire brushes took the rest off, and some of the surface etch. Then by hand, successively finer wet and dry paper and plenty of water; 180 grit, 240 grit, 400 grit, 600 grit, 800 grit, 1000 grit and then polished off by this Peek. Lack of time and patience means I've not achieved a mirror finish on what had been a dull matte grey etched surface to key the non-stick, but a blind man would be glad to see it, and being stainless steel it still doesn't stick. I've given the same treatment to a similar vintage milk-pan, and added the before and after pics

Well, I built a garden room ,on my own ,which needed some steps up to it ,,so proud of myself,,,until my good wife pointed out ,,you need some railings in place, so I bought stainless steel tubular,,suitable for indoor and outdoor, on Amazone. Now the base plate for the uprights was ,I thought a little light so I spent a lot of time and effort in engineering a comprise,,,,work done. Five weeks later, I noticed some specklin or tarnish, it couldn't be rust ,,could it??, six weeks, and just before my American friends were to arrive on holiday and to survey my masterpiece it looked like a disaster. I rushed to the local store for metal Polish ,I tried all they had ,I polished and polished to no avail. Desperate, I went on Amazone,,looked for metal polish ,and found ....Peek ,, Absolutely fantastic,,, with little effort I got does railings nearly like new .To apply I use old socks on my hands on the rails with rubber gloves inside, keeps your hands clean and safe and polish off with some fresh ones ,and then I found best not to use on hot sunny days when the metal gets hot ,, Peek is a fantastic metal polish, saved my bacon .

Used to clean stainless steel sink with heavy limescale staining. It removed the limescale but didn't restore the normal stainless steel lustre. Also didn't protect the return of the limescale - which is what I hoped for in the 'protect' claim.

Cleaning the brass and copper on board ship was once known as the 'Sailor's Pleasure'. It is a therapeutic occupation, radio on, rain lashing the windows, fire alight. Not a bad way to spend an hour or two. The cheery glint and shine of a well cleaned copper kettle, jug or lamp makes the room come alive. Our house has many such items, so I have, believe me, tried the whole range of possible polish from the nine pounds a toothpaste tube M**s to good old Bras** and the wads of ready made polishing cloths that leave your hands black and stained. Seeing the excellent reviews for Peek I decided to give it a whirl and I have plenty of positive thoughts to report. The 250 ml tin is a most generous size, which should last for ages. The thick blue cream is clean, fresh smelling (a touch of the traditional brass cleaning product scent) and leaves little residue on the cloth; you won't have to throw away the polishing rag, just rinse it through. A small amount buffs up a whole item, it really does the job quickly and thoroughly. Silver, copper, brass, stainless steel, aluminium, chrome and bronze are all grist to its mill, it doesn't seem to mind what you ask it to do. Motor cars too, will gleam with the attentions of this versatile polish. It's good to be able to buy a pot that will last so long before you need to replace it. I expect pubs will be pleased with this; here in Cornwall there are some cosy bars well stocked with nautical artefacts, all would be grateful for a rub down with Peek!

I think it does what is advertised, but I was looking for a miracle. It's quite a large can, so I'll probably only ever need one for my purposes.

استخدمه لخدوش السياره ممتاز

This product did not work for me! I tried to clean my metal door handle and it didn't work, not one bit. I don't recommend.

This Works Amazing for Pyrex , so when I Saw a Fiberglass Boat on the Container I thought what else can I use to Clean my camper other than Gel Gloss which does not work on my Camper by the way , So I gave it a Shot and was Completely Amazed I have Provided Pics to Show the Difference I Hope this Helps Someone that is Looking to Rejuvenate the Exterior of their Fifth Wheel with Minimal Effort and when I say that I mean NO BUFFING ..... SERIOUSLY The Pics show what was done in a few Minutes by hand with a Cloth to Apply and Scrub with and a Clean Rag to Wipe Off 1st Pic shows the Front I had done all but the Storage door to show how it it my brighter with lots of Shine 2nd Pic shows another Storage door that has been done but all around it is Dull while the Door has a High Shine , Last Pic is a Portion on the Side where you can Actually see the Camper parked next door in the highly reflective shine we now have , My Husband was at work when I did my trial test he seriously did not believe what he saw so he did a video chat to see for himself , he said I am going to use the buffer with this but when he actually used the Product himself on the camper he said we will not be needing a buffer after all , because it works as soon as you put it on it literally cuts through years of Oxidation in Minutes ,I Hope this Helps Someone out there because when I was searching all I kept finding is the Normal Marine or Camper Stuff but I will tell you this Stuff is Amazing

Conociendo el producto de antes pensaba que aun iba a ser igual, pero nada. No digo que no esta bien pero hay que frotar bastante para sacar su brilló