KHI Concealed Hinge Jig, Blue

Pleased I spent the extra few quid on a Kreg one...it wasn't worth me buying a very expensive professional one as I'm just a diy'er.... but trusted the Kreg brand quality. Really easy to use, sharp bit cutting very cleanly in solid oak doors, and solid feeling plastic jig keeps it squarely at 90 degrees. As others mention the pilot holes need a little careful drilling as the jig 'cage' that houses the forstner can get in the way of a spot on 90 degree approach because of the drill chuck coming up against it....but by being thoughtful on centering the drill as close to 90 degrees as I can, it has caused me no problems....and I have never done a job like this before. Was pretty nervous about wrecking my new cupboard doors but tested it on a bit of scrap first, and then was quickly able to work on the doors themselves (was expecting to need a lot more time to set up and practise) ...this has made the job a breeze! Its a fantastic bit of kit for a total door hinge novice cutter like me!

I have never made a cupboard door from scratch before and I found this tool really easy to use - just clamp it on and drill the hole - simple as that. Having an extractor or something to help clean up all the wood shavings is a bonus as there is a lot of wood that comes out. The quality and neatness of the hole was really excellent and the hinges fitted with no issues. I didn't use the small holes for the screws as I didn't have a drill bit thin enough but wasn't an issue as just marked and drilled by hand with a speed square. Overall very pleased with this - it doesn't look like much but it does the job incredibly well.

So you can only adjust the depth in increments of 1 mm. I guess this means you’re less likely to end up with different depths left and right so it’s easy to use. However I suppose there might be situations where you wnat to adjust more finely I thought it was really easy to use - my only criticism was that the hole was slightly too wide for my screwfix hinges. They fit ok but there was a little bit of play which I guess over time might be problematic as all the strain is on the screws as opposed to using the cup to help secure the fixing. To get it perfect I would need to buy a different bit and hope the diameter fits the jig - which makes the whole thing quite expensive But apart from that the device gives you perfe t depth control and the hole is of course perfectly straight

Excellent piece of kit, so easy to set up and use. Makes locating these hinges and drilling the holes so easy and perfect every time.

Very good quality and easy to use as a DIYer. I have used it to drill hinges for 8 doors and they fit perfectly. Would buy it again.

Dose exactly what it should with easy adjustment

I was replacing some cupboard doors and needed to drill the holes for the hinges. Before it arrived it was quite a daunting task but this tool is brilliant. Really easy to use and gave me confidence doing what I thought was a complex task before this arrived. Highly recommend this tool if like me you need to seat hinges in cupboard doors.

Works great, gets bound up on cheaper mdf a bit, but if you are going into Hidrofugo MDF or pine etc its fine. Done about 120 holes so far in various materials.

Did exactly what I needed it to do and cut through my walnut plywood with relative ease. Very satisfied and worth what I paid for it.

Conferma la reputazione del marchio. Semplice da usare, preciso .

Kreg doesn't disappoint. Works like a charm. The adjustment that allows spacing the hinge at different distance from edge is very practical. Would definitely advise to purchase.

Like all of the Kreg product. I Have purchased quality stand out

Perfecto para hacer los agujeros para las bisagras, pero con la ficción y el calor de la broca, el plástica al final acaba deformandose un poco.