Pro Bike Tool Mini Bike Pump - Fits Presta and Schrader - High Pressure PSI - Reliable, Compact & Light Performance - Bicycle Tyre Pump for Road, Mountain and BMX Bikes

I have had an excellent experience with this product and seller. Firstly, the pump arrived promptly with Prime and exactly as described. Having not owned a bicycle/pump in a number of years it is difficult for me to make a comparison but everything about the product looks to be of premium quality. Having bought many sub-par items off amazon over the years in my quest to save a few pennies it is usually easy to spot something cheaply cobbled together, but this looks well designed and purposefully built. It is incredibly light and compact with a solid aluminium body that produces a very smooth pumping action. I have a presta valve on my tyres and the attachment nozzle works like an absolute charm and hides neatly within the pumping tube itself when not in use, and I have no reason to think it’d be any less smooth with a Schrader valve – it really is quite a clever contraption. Each pump produces only a small amount of air (as I guess is the case with all mini-pumps) but doesn’t seem to weaken as the pressure increases, which I think is the key thing. The only thing I wished I would have had on the pump was a pressure gauge… Being a long time since I’ve cycled and not having owned a road bike before, I didn’t feel overly confident in guessing but having realised this too late… This is when I spotted that the seller also sells a version of the pump with a pressure gauge included for a few pounds more! Suddenly realising my error and wishing to exchange items I contacted the seller and he has made it more than simple to do this from start to finish whilst minimising the expenses I would incur for a mistake that I had made. This was really the icing on the cake! All in all it’s a fantastic product and a seller with a great attitude towards customer service. I would absolutely look at this person’s products over others in the future, and strongly recommend!

Great little pump, well made from aluminium with a really nice finish. Small enough to fit in a pocket or bike bag. No need to attach to the bike. Can get good pressure and no batteries or C02 to run out! Should last many years

The pro Bike mini pump is really good. It's just the right size, nice and small as I put it in my Backpack with my other Bike tools for on the go ( I believe it's supposed to come with a bracket to fit it on your bike but this was not sent, luckily this didn't matter to me but I wasn't getting what I payed for, but maybe it was a one time error! I was thinking it was going to be slippery to hold on first inspection but where you grip the pump it has grooves in the metal so my hands didn't slip at all and I was really impressed with how quick it pumped up my tyres, for something so small, from completely flat to full tyres was really fast and it was super smooth and easy pump the handle too. I chose this one so I had the Presta and Schrader connector and I wanted one where the connector was separate and screwed on to the head of the pump as I feel you get a much better connection that's easier to fit on and does not tug on the valve. But I did find it was easier to screw on the connector to your tyre valve first, then screw it on to your pump head otherwise as you screw the whole pump is turning round which is a bit awkward. I was actually also missing one of the small black rubber washer rings that go round the threads on the Schrader valve but it still connected just fine. It also didn't come with any instruction booklet but it's pretty simple to work it out and I did familiarize myself with the pump with a good old You tube video. Overall really impressed with its aesthetics, quality and performance, durability will obviously be concluded in time but I'm hopeful.

I was a little unsure to begin with due to the price. However, the design is very similar to the Lezyne high preside range of mini pumps, and historically I've got on well with them so for the low price I bought 2, one for me and one for the wife. It comes in standard retail packaging, what you would expect for the price. Nothing flash but this is good for 2 reasons - firstly you know they haven't spent a quarter of their budget on a fancy box, and secondly it's not one of those awful clam shell packs that you need a pair of industrial strength wire cutters to open. Just a nice see through box. Inside is the pump and a plastic frame mount with a velcro strap to hold it on. I don't use these personally, but for those who want to attach to the frame, it will do the job. The pump itself is incredibly well made. All the parts feel secure and high quality, the rubber ends fit nicely, and in the hand the pump feels robust and useful (better than some pumps at twice the price frankly). In use, you can do either Presta or Schraeder valves, simply by using the opposite end of the hose. You then attach the pump to the other end of the hose and get pumping. The pump does get to the required high pressure eventually, it takes a while but this is a tiny hand pump not a track pump. All in all it's a great bit of kit at full price - a bargain at the cheaper price. Go for it.

Wow - this is the business! I've tried loads of mini-pumps over the years and this is the best by far. It's small yet inflates quickly, even on fat 29er mountain bike tyres and it will go up to the 100+ PSI you need for road bike tyres no problem. Also it's got the best design ever for the attachment to the actual bike valve. There is a hose that screws onto the pump and the other end on to the bike valve - fits BOTH shraeder and presta valves. And the best bit is once it's screwed on it's a guaranteed perfect fit. Most pumps have some rubbish press on or quick release system which looks easy until you try and use it as they always leak air and you are never sure if it is on properly. This one takes 5 seconds to screw on and then you know it's on and all your pumping is inflating the tyre so you save loads of time by not having to faff with the valve attachment and check whether it's on properly. The pump has been really well designed by someone who obviously uses bike pumps a lot. There's a dust cap on both ends so no matter which way up you put it on the frame there's no muck and dust getting in there. And also the actual removable hose fits inside the pump and screws in place when stowed so you know it's not going to fall out of the pump, in your bag or even worse when you go over some bumpy terrain. The frame attachment is a nice fit with good quality smooth materials so no frame scratching and the velcro holds it in place perfectly with no rattles. All in all the best pump by miles - I've had mountain morph, blackburn, topeak and others and they've all been rubbish compared with this one. Here's a few pics to give you a better idea of what it looks like in real life - must say very pleased with the looks and finish of the product too - seems really well built and machined - feels very high end quality. Premium Mini Bike Pump by PRO BIKE TOOL - High Pressure - Reliable & Compact - Presta & Schrader Valve Compatible - Superior Quality & Performance - Great for Road, Mountain, BMX & Kids Bicycle Tyres

I bought this to replace a CO2 device, which proved tricky to rely on. A pump has infinite air in it, doesn't cost anything to refill, and you can gladly offer it to a stranded cyclist by the roadside. The reversible design that allows for Presta or Schrader fit is clever. Due to its small size, it obviously takes longer than a large floor pump, but it wasn't too bad at all to fill even a 29x2.6" to firm, and it now lives permanently on my bike frame. This pump has a nice feel to it, well machined. I have other products from Pro Bike Tool, so I guess I'm a fan of their tools and their lifetime warranty- I've only needed it once, but they looked after me. Thank you again.

In terms of production quality, this is definitely a great product. The pump is compact and lightweight – and is made of a sturdy-seeming metal rather than cheap plastic. In addition, the normal mounting bracket that you’d expect is augmented by Velcro – vastly reducing the chance of the piece of kit jumping out of the bracket while riding. Because I was keen to try my new toy, I let down one of my tires and then used the pro-tool to pump it back up. The first thing I noticed was that the flexible hose is a real bonus – I had forgotten how useful these are compared to the more normal fixed connectors most pumps have these days. The hose has a simple mechanism to connect up to the valve and one which lets out very little air when connecting and disconnecting. The key point however, was that the pump itself works to a much higher pressure than anything I have used of a similar size – I ride a touring bike on 700x32s and this pump was more than adequate to get them roadworthy – a little more effort than a trackside pump, but much better than running on softish tires for twenty miles until you can get to one. Overall a very good buy.

I ordered this pump because of its size, the fact that it could be used for both valve types and it also has a hose attachment. The pump arrived promptly and I wasn't disappointed; it's a lovely piece of kit, light but solid, the hose attachment is securely screwed inside the barrel, when not in use and has a different valve attachment on each end (priests or shrader). The pump came with a bracket that can be fitted behind the bottle cage, but the pump is also small enough to carry in a pocket. It looks very nice too - a machined tool, rather than a plastic tube. I was also impressed with the seller's customer service; I was sent an email, giving tips on how to use the pump correctly and also inviting me to get in touch if I had any questions or problems. Overall a lovely bit of kit and a great shopping experience.

Compact and beautiful pump, looks great on the bike and the mounting seems pretty solid with the strap. The performance is okay, it inflates quickly and without much work until 45psi. After, you will have to do some heavy work. Good for a compact pump to carry on bike.

Per il momento non mi ha deluso.. la usata una decina di volte ed è valida al mio avviso.

Oggetto di alta qualità, reale e percepita a dispetto del prezzo irrisorio. Pompaggio scorrevole ed efficiente. Prende il posto delle pesanti bombolette di co2.

Pompe utilisée sur pneus tubeless. Plutôt efficace même si il faut une centaine d’inflations pour gonfler le pneu. Taille raisonnable. Fournie avec outil de fixation au cadre. La pompe semble solide. Au final, je la recommande

good in emergency situation fits in the bicycle well does its job nicely but no meter.