KEMIMOTO Universal Motorcycle License Plate Bracket with LED Light Aluminum | Fit Most Motorcycle Fender Eliminator Kit Tail Tidy License Plate Holder Mount 30-115mm Mounting Range Black

This fender eliminator was perfect for me. I have an odd Italian bike that there is not much for unless you want to wait a long time. I couldn’t find anything that looked like it would work. I bought this mainly on price, and knew that I could return it if it wasn’t going to work. I was pleasantly surprised with this unit. It’s well made for the price; I wasn’t really expecting much. It was mostly assembled, but loose. I installed the LED plate light, and proceeded to fit it to my bike. The spacing on the mount was perfect for two of the holes left from fender removal. It went on using the factory screws that held on the fender. The adjustment is good to get the angle right, and it fit well. My only suggestion would be to tighten the screws, then back one out at a time, and use some blue thread locker before final assembly. Do not crank down on the screws, the unit is just aluminum, and the screws are stainless. All in all, I think this is a good value for the price. It’s fairly inexpensive, and looks good too.

Great budget tail tidy, but DOES NOT FOT APRILIA RS457. I could make most of it work but you can’t attach the turn signals.

good looking product, seems durable enough. was oddly shipped open box, but all pieces (including the rusted out allen keys) were still contained in the box. unfortunately this unit does NOT FIT a 2024 Svartpilen 401 :(

Works great. It was easy to install once I could get one side on, but that’s just because I don’t have three hands. I don’t know if it’s normal or not but one of the LEDs was a different color, but it didn’t really make too much of a difference all that matters is it worked.

This plate holder failed on me: I lost my plate and destroyed my new tire. I had one like this from another brand that I used on my other bike without issue, I bought this because it’s the same design and 2 weeks later it came off. Now I have to spend 300 dollars on a new tire and new plate. My tire could be fine but it’s not worth losing my confidence in 1 of 2 of my contact patches. Be wary

This mount IS NOT compatible with the 2022 Kawasaki Ninja 400 unless you grind off the steel wire sleeve that sits under the rear seat. Apart from that it functions properly, is study solid steel, was easy to install, and work he price, however keep in mind the license plate illuminator light is not actually yellow or white, but rather blue/purple.

I have yet to ride with this on my bike but I have installed it and it fits great. once you get it it is quite loose and you will need to tighten all the allen screws. Once you do that it should be super sturdy. I may remove the bolts and add loctite for piece of mind but other than that this fits and looks great. it was bolt on for an 07 FZ6 fit great.

I only rated the FINISHED product five stars. To install on my CF Moto 650 NK I had to cut the corners off the piece that mounts the bracket to the bike. Then I filed the corners smooth and shot a bit of spray paint on it. Even after this modification, which I done only to get the bracket to fit into the recess on the bikes body, I had to drill out new mounting holes for the bolts to actually attach the bracket. Now that the bracket is on the bike you'd think you're good to go but you'd be wrong because the final section doesn't tighten down completely, and I read of this condition on this or another bracket, but I ordered this one anyway. You have to take the bolts out and install a washer OR you might be able to drill out the holes the bolts GO THROUGH, which are threaded but they shouldn't be because there are nuts on the backside, which tighten the bolt. The wires for the license plate light are like hairs, after carefully stripping I soldered them THEN attached them to the bikes wiring with crimp fittings. THIS IS NOT A DIRECT OEM FIT. But, at this price if you have the tools and are at all mechanically inclined you will be happy with the end result and you can rate your install five stars, because by the time you're done you'll deserve it.

Quality is bad

Excelente produto, recomendo.

Very well built , comes with LED tag light . Can be adjusted . Was very happy with purchase. Fit my 2012 Honda cb1000r perfect .

ما يركب على دبابات ريس سوزوكي بالتحديد gsxr600 رغم انه مذكور بالاعلان ان يتوافق معها

Good items