Push to Open Magnetic Door Latch Cabinet Hardware Heavy Duty Push Magnets for Large Door Push Release Latch Kitchen Drawer Push Catch Press Out Touch Latch (Black, 6 Pack)

I AM VERY IMPRESSED ON HOW WELL THIS WORKED. I NEEDED A PLUNGER THAT COULD OPEN A HEVAY DOOR AND AFTER ORDERING SEVERAL DIFFERENT PLUNGERS THIS ONE DID THE TRICK. i NEEDED A PLUNGER THAT WAS SMALLER THAN 3 INCHES LONG AND IT WAS VERY EASY TO INSTALL. i WILL BE ORDERING MORE OF THESE.

I didn't exist then to be so big HOWEVER, the are not large. They are Def heavy duty!!! I didn't need heavy duty but i wanted meeting sturdy and i am VERY HAPPY i got these. They have a very premium feel and we're super easy to install! Two magnets come that u can install on the door and one if them is stronger than the other (u choose based on your needs) but both hold VERY well! Door closes and open with absolute ease! Definitely worth the money. Must b installed on a flat surface in your cupboard.if neither are flat, it won't b compatible unless u make a flat surface. The door springs open 1.5 inches which is very good. It comes with stickers to indicate "press it". Don't like the Chinese writing on it lol but that is the least.. If, and this is a big if, I were to find a con, it would be the size but I'm perfectly fine with it based on its performance. It's just a tad but bigger than I anticipated but everything else about it over shadows that.. The feel is very very premium folkes. It feels great. Super easy to install

Will probably be just fine for most use cases… but i’m using this in a gentlemen's custom knife scabbard, and my standards are premium. Can’t abide a plastic shell as it’s being embedded alongside top-grain black rawhide in a Buck 119 fixed blade sheath. The current unit had to be painted and top-coated in vehicle grade semigloss. It’s slick tho - push-to-deploy, push-to-lock, kinda jumps into your hand. All the fun of an otf automatic, non of the legal shicherbrichiz. Probably going to run a kickstarter for it, since every dude who sees the working prototype immediately gets all grabby n gabby. Gentlemen PLEASE. Stop it some more!

Used on a custom built 54" tall standing double door cabinet where no handles were wanted. Installed both to the bottom side of the top with the magnets on the doors. The push to open works great. It extends the door about an inch or so past the remaining closed door. Enough room for fingers to slide in easily and open the door fully. Nice strong connection with the doors where nothing was needed on the bottom of doors to keep closed or flush. Seems like a nice quality latch. Would buy again.

These didn't work well for my application because the throw and spring tension didnt match well with my sof close mechanisms. I'm wanting these as a push to open mechanism (PTOM) for the pocket doors in my house, which are equipped with soft open and close mechanisms (SOCM). Ideally the pocket door could be slid open at the lowest speed possible, hit the PTOM, and the SOCM would carry the door all the way into the pocket, latching the PTOM into the closed position. If you know anything about springs and soft close mechanisms, you should see the paradox here. The springs in the PTOM need to be soft enough that the SOCM can fully retract and latch the PTOM, but then they need to be stiff enough to overcome the SOCM when you push in and release the PTOM. As far as I know this is physically impossible. However, there is at least one YouTube video (he used these units) that says this capability exists in Canada or Europe or maybe both...no clue how you can do it though because the PTOM needs to have a weaker spring than the SOCM upon opening the door (closing the PTOM), but a stronger spring upon closing the pocket door (releasing the PTOM). The other thing you need to look out for is having the correct throw. If the throw is too long, the SOCM will not "grab" the door before it hits the PTOM. This will cause the door to bounce off the PTOM. Unless you use the magnets maybe. I didn't because the SOCM should hold the door into the PTOM and the magnets would make it unnecessarily more difficult to pull out of the pocket. On the other side, if the throw is too short, the door won't come out of the pocket far enough to grab. The ideal throw would allow the SOCM to just barely grab before hitting the PTOM, and then when releasing PTOM it would be able to just barely escape the clutches of the SOCM. In the end physics still wins and this unit was simply not a good match for my SOCMs. I give these three stars because they are nice units but not working for my application. But apparently (according to a statement on YouTube, i could find 0 examples though) Canada and Europe has exactly what I need but nobody sells it in the states and I'm trying to encourage getting them here. Ultimately someone should sell a PTOM with a matching SOCM that are designed to work as I described above. But since, throw and spring force both need to be matched, a single manufacturer would probably be the only one who could make it work perfectly, if it's possible. Or a unit with tuneable spring tension and throw may be the best option, but then it would probably cost a lot more and i didn't see any like that. However these can easily be opened up and you can change the spring and maybe even the throw somehow. I really wanted to try the "EZ OPEN" PTOM. but at $45 a pop, I wasnt willing to experiment with that kind of money. I ended up going with a 3-4" long round unit that was, less expensive, much easier to install and has much better throw for my application than these ones.

Great Product

Good quality

Would not work for my cabinet application. Expect to have the cabinet face sticking out a good ways from the frame if you want this style to work. Screws are also poor quality and make the finished look unattractive.

Ik was helemaal blij dat ik ze binnen had en heb meteen de eerste gemonteerd. Het leek allemala goed te werken en het was eenvoudig te monteren. Nadat ik het systeem weer teste kreeg ik hem pas na 6 keer duwen in de lock positie. Heb dit daarna weer geprobeerd en weer hetzelfde. Hij werkt dus niet altijd erg goed. Om het positief af te sluiten: hij heeft wel een sterke duwkracht.

Die Drucktüröffner funktionieren einwandfrei. Der Mechanismus reagiert sauber auf Druck und hält die Tür zuverlässig geschlossen. Besonders praktisch bei grifflosem Möbeldesign. Die Montage war schnell erledigt und das Material wirkt hochwertig. Klare Kaufempfehlung für moderne Schränke oder Schubladen!

Parfait, fait le job et solide en plus

Haven’t used these catches as yet but I have tested them and they are very good. I will get around to using them when I replace the cabinets doors over the winter. (It was to hot this summer so some jobs got put on hold)

Used for cabinet door that did not have handle. Easy to install, operates perfectly.