amFilm Screen Protector Compatible with analogue pocket

It's exactly what I needed for my Analogue Pocket. It fits perfectly

This glass protector is so easy to install a caveman could do it and im a caveman so trust me. The quality and clarity of this glass as well as the instructions and the installation kit makes this the best screen protector out there. This company really pats attention to detail and the no questions asked warranty means i wont use any other company out there again! I have used expensive screen protectors in the 40$ price range 1$ cheap screen protectors and this inexpensive but really high quality protector makes them the best. I have always had issues installing screen protectors i always always misaligned them theres always specs underneath the glass and dont even get me started on bubbles that seem to be caused by invisible debris. Well if you fallow the easy steps in the instruction manual you wont even be able to tell theres a glass screen protector on your device. I bought this for my analogue pocket and it looks so fresh and so clean. Purchase with confidence follow the simple instructions take your time and you’ll feel like a professional installer aftrr your first try!

The Analogue Pocket has such a crisp and beautiful screen. It's only appropriate to use a glass screen protector. I've previously purchased an amFilm branded screen protector for my Nintendo Switch, so I figured I would use them again for my Pocket. I'm really glad I did. The installation process was quick and simple. I was thankfully able to line it up squarely and evenly. The entire process of cleaning the unit and installing the screen protector took less than five minutes. Overall I am very satisfied with this screen protector. It's quite thick, provides ample protection, and is also crystal clear. The latter is very important, as some screen protectors produce a film-like overlay on the screen. The screen clarity is just as good as it was without a protector.

Worked with no issues. Easy install!

Chose this screen protector kit for my Analogue Pocket because it includes 2 protectors and everything you need for a bubble-free installation. This kit uses a pair of wing-like handles to center/orient the screen protector into place and plenty of dust stickers, but I found a better method that repurposes those dust stickers as "hinge stickers," which has been my go-to method for literally every device. Here's my methodology used to get a perfect centered and spotless installation: 1. Screen prep: I started by prepping the Analogue Pocket's screen with the included alcohol wipes to remove oil and most of the loose dust. Note that it's not important in this step to remove all the dust yet because plenty more will sneak in as you're aligning the screen protector, so we'll address the dust particles later. This step is primarily to remove all the oil and fingerprints. 2. Center the screen protector: DO NOT remove the film sticker labelled "step 1," instead I peeled one of the dust remover stickers and attached it to the top middle of my screen protector about half way, leaving some slack for later. I worked from one corner to the next while holding the sticker to nudge the protector into the center of the Analogue Pocket's screen. Once centered, I firmly wrapped the sticker around the top center of the device. If done properly, you now have a "hinge" where you can open/close t he screen protector like a clamshell. This serves as an initial starting point that's relatively locked in, but allows you to make adjustments without the screen sliding all over the place. 3. Apply the other hinge stickers and lock-in placement: Next I attached the left and right hinge stickers to the top of the screen verifying that my protector is still center-aligned as I went. Then I locked the protector in place by firmly wrapping all the hinges around the top of the device. Now the protector should be able to open and close over the Pocket's screen like a clamshell. Did this a couple of times to verify that the protector's position is locked-in by returning to center every time. 4. Dust stickers: Some dust most likely got onto the Pocket's screen while attempting to center the protector, so now it's time to completely eliminate dust and immediately apply the protector afterwards. I lifted my protector about 50-60 degrees, and used the included microfiber towel to wipe my Pocket's screen. Then I peeled on of the dust stickers and went over the entire screen. It helps to shine a light at a low angle to see any stray debris that the dust sticker may have missed. 5. Peel the backing and apply: Immediately after removing all the dust and while still holding the protector up (you dont want to drop it back down on the screen and re-introduce dust from the backing) I peeled the film (labeled "step 1") and gently laid the protector down on the screen. Then I tapped the center of the protector with my finger and let it seal its way to the edges on its own. The squeegee wasn't even necessary at this point because there was no dust or bubbles. If you find a dust bubble, gently lift the protector from its nearest edge/corner, and while maintaining a very shallow angle remove the dust with your dust sticker. Voila, perfect installation.

I didn't feel like paying for the overpriced shipping costs from Analogue for their screen protector and thus opted for this one. Also got 2 screen protectors for the price of one from Analogue. However the first screen that I installed had an area where there was no adhesive in the corner. Not sure if that was a defect with that specific screen as the second one didn't have that problem. It was a good thing that they included two even though one didn't work. I installed the screen after turning on a hot shower in the washroom to ensure that there wouldn't be any dust particles and the installation for the second one was flawless. Only docking stars because the first screen was defective.

I've tried applying many, many screen protectors and I am bad at it. This one is a different story. Normally I can't avoid the bubbles and, maybe it's because I used to bathroom trick this time, bit it came out perfectly adhered with no bubbles. I haven't tested it yet because frankly I'm averse to smacking the screens of my devices to see what happens but I've had no scratches in over a month and this thing is showing no signs of chipping or cracking. It's the perfect size for protecting the Pocket, I'd try this before other brands if that's what you're looking for.

If you’re gonna make an investment into the pocket, it’s definitely a good idea to protect the screen in terms of thickness, quality, and fitment. Everything was dead on. I would say that it’s what you would come to expect from high-quality cover. There are not a lot of options specifically for this device, but it worked and did its job and I haven’t had any hard hits but time will tell if it will hold up but it seems like it’s a pretty robust glass piece

Passt perfekt auf den Analogue Pocket und schützt super vor allem. Ein Sturz der ausversehen passiert ist hat super geklappt. Nur die Display Schutzfolie ist tatsächlich kaputt gegangen und nicht das Display vom analogue. Würde es definitiv wieder kaufen.

Dimensione corretta, ottima fattura e nessuna bolla.

貼る前に誇りを完璧に除いたつもりでしたが、1つ埃が入ってしまい、1枚無駄にしてしまいましたがモノは非常に良く、サイズがピッタリで透明度が高く良かったと思います。ただ、貼り付け後に剥がすのにピッタリくっつきすぎて取るのに苦労しました。 これから作業される方はお風呂場など埃が少ない環境でされることをおすすめします。2枚入っており助かりました。 2025.03.21追記 貼り付け失敗したフィルムを綺麗に剥がして、セロテープでホコリをとり、再度貼り付けたら非常に綺麗にはれました。貼り付け直しできる点もかなりポイント高いと思います。星の数を4→5に修正しました。

Queda perfecto en la Pocket. Todos los protectores de pantalla de esta marca que he usado son de lo mejor, y este no es una excepción. Teniendo en cuenta que la Pocket es un dispositivo caro y de importación, mejor salvaguardar en lo posible su mejor virtud, que es su magnífica pantalla.

Si tienes duda sobre si le queda bien al Analogue Pocket, no debes preocuparte, le queda bien.