onelinkmore U.FL Mini PCI to RP SMA Pigtail Antenna WiFi Router Cable Antenna NGFF Interface for WiFi Router Gateway Wireless PCIE Network Card Pack of 2

This order was great. I think I purchased it for six dollars and expected only one pigtail, but two came and I was completely surprised. Now I use these for a project. I'll explain the project below. Know if you need any help with the same project or projects similar, let me know if I can help in anyway. I would be more than happy to help you out. I absolutely loved these panel antennas. These directional antennas I used to have them for my project. My project was to take my existing access point extender for my DJI phantom multi-copter. What I did was I purchased two pigtail connectors, and I drilled a hole in the phantoms repeater and connected the antenna parts on the circuit board. I mounted the directional antennas. you can use only one panel antenna if you want, but I decided to use to directional panel antennas because you can't beat the price. They do work and they work incredibly great with my phantom vision plus. I mounted them on my tripod. You could do something else and mounted on a pole with a base but I decided to purchase a tripod which was cheap because I found it at a thrift shop and it was broken. I fixed the parts on the tripod that were broken and I installed the access Point extender and I mounted the two directional panel antennas , one pointing more vertical and one pointing more towards the sky to capture the height and altitude of the drone and the other one antenna to cover the distance of the drone. You can use any router extender if you're not comfortable taking apart the phantom vision control repeater but keep in mind it is so easy to do the mod, but nonetheless you can get a different router or any router and configure it but remember you have to rebind the camera system and the access point So, I am extremely happy with my set up. I have my tripod. I have it extended all the way out, I purchased an attachment that holds an iPhone up to an iPad so that I could see it a bigger picture of my flight, I added the two antenna panels, added the access point, and I also decided to purchase a power bank and attach that to the tripod is well. The power bank I think is it 3200 or 5300 milliamps per hour. Has an indicator of the capacity of the power bank and it also has a cool flashlight on it. Which is useful when it gets dark and you're putting things away. The power bank is constantly connected to the access to charge while it's in operation. Overall a sweet success

I bought these pigtails to replace a broken connection in my original set. These are so much more sturdy feeling. The snap that attaches to the wireless card feels solid and it connects with authority. The insulation is stiffer than standard and has a nice sort of smooth surface with just enough of an embossed pattern to provide grip. Both ends are sealed with heat shrink. All-in-all, a high quality replacement for a usually fragile item. I recommend it highly with one caveat: it is only about 200 mm (roughly 8 inches) long. That's not a fault, it's simply a spec that you should be aware of. In my case, it is the perfect length. I will definitely buy these again when the need arises.

This was quite difficult to navigate. Since it was for the first pc i bought off of FB market, probably my first mistake (not my last) and the wifi was slow, I had to figure a way to fix it. No it wasn't the antenna, no it was the weak router... It was my wifi card on my pc that had a broken pigtail. Honestly i forgot how i figured it out but i was frustrated at myself for buying a pc off of fb market. $6 plus tax for this is pricey but honestly i don't think you can get this anywhere else. It clips on normally as expected. I would just suggest you be careful and get the right one, it's hard to tell what wifi card you have but you need to do extensive research. There is a M.2 card and there is also a mini PCI board. Those will trip you up if you don't know the difference, even now i still don't know. Other than that, it works fine, looks fine, small wires but as long as you're not swinging your pc around it's got good durability. I'd have to say to make the name a little more easier to read and understand since it's a bunch of fluff to make get it in the search bar.

arrived on time and in good packaging. Well it is exactly as advertised. My only issue was that I needed a pigtail with wire leads to solder to the board, but I could not find any such animal. If any one knows where to find one, please let me know. In the meantime I had to gently strip this miniature coax cable to separate the thinner than hair bundles of wire to tin and attach them. Worked very well but for my new twitch in the eyes, haha. All kidding aside the product is very well constructed and works very well.

Seems to be a good cable. However, make sure you are getting the correct ends. I was getting it to match an adafruit ultimate gps to an amplified gps antenna. I didn't pay a lot of attention to the ends because it was a recommended item to purchase along with my gps and antenna combination. Unfortunately the sma end is a male and so is my antenna cable. I'm sure they will work fine for external antennas on my particle photons.

One of the answer states that the pigtail fits with the Intel 7265NGW. Nope, it does not. I bought this set and a Intel 7265NGW card from Amazon. The connector from the pigtail is larger than the connector on the card or the other way around. At least, it does not work for me.

I made a modification to a device I have here. This Pigtail cable worked just fine. I suggest to people to be careful when installing these as they are fragile. I might have pulled on the end where the cable actually attaches to the Pigtail because the little middle connector got pushed in enough that it was not making a connection. I was wondering why my signal was not raising when i first installed it. I like how this purchase has 2 Pigtails inclosed ! I was able to take apart my device & use the other one that came with it. It worked just fine. They work great just be careful when handling them installing them in whatever it may be you use them for. I could have used needle nose pliers to pull the middle connector back out but I don't own a pair yet.

Used these pigtails with the high gain antennas Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna With magnetic base for Alfa - WUS036H, WUS036H1W, WUS050NH, AIPW610H, AIP-W610H, APA05, WUS036NH, WUS036NEH, WUS048NH, WUS036EW, WUS051NH AIP-W502U, AP48, AP51, R36, IMESH51, ... to increase antenna tx/rx range on my Cisco Linksys E2000 router Cisco-Linksys E2000 Advanced Wireless-N Router . It's as pretty simple and straightforward install if you're comfortable with tinkering around a tad bit. Simply open the case (unscrew the case screws--you will need a special security torx bit), snap off the internal antenna's UFL connectors, snap on the UFL connectors on these pigtails, drill out two small holes in the exterior of this case next to the ports and screw the RP-SMA connector end of these pigtails into that hole. There you go, you now have RP-SMA connectors on the E2000 router to hook up to your external antennas! FYI--I converted my E2000 router with custom-made dd-wrt software so it has a LOT of features that are not standard on the E2000 (google for the instructions, it's relatively easy to do (again, if you are comfortable working with hardware flashing and custom ROMs, etc).

Good little wires to hook up my PCI-E WiFi card in my Msi Motherboard to the outside of case. They work great! Intel 7260 dual wireless card to 2 antennas. Fast shipping a day earlier tham expected. Good quality

Habe diese beiden konfektionierten Kabel gekauft, in ein DSL-Modem-Router einer Berliner Firma eingebaut, und bessere Antennen angeschraubt. Das Ergebnis. Fantastisch. Wesentlich bessere Reichweite (WLAN)... . Die Garantie des Routers ist dann futsch. Das sollte man beachten. Im I-Net gibts gute Anleitungen, wie man es um/einbaut. Mit ein paar Euros, viel Geld gespart. Sehr gute Verarbeitung. Der Kauf lohnt sich.

c'è poco da dire, sono quello che sono: due connettori standardazziti. Svolgono il loro lavoro in modo perfetto. Materiali, filettatura, elementi di connessione, ecc, tutto ok. Soddisfatto Occhio a quando li montate perchè i fili sono sottili e tendono a rompersi se sottoposti a torsione (quando avvitate la parte sma assicuratevi che non ruoti anche il filo se è già stato collegato il connettore ufl, altrimenti il filo stesso si spezza). Utilizzato per accomodare il radiocomando di un hubsand h502s

Grateful products

Se me rompió esta rosca en el router tras una caída en casa y desmonté el Router Asus y tenia exactamente el mismo cable así que lo compré, lo instalé y perfecto como anteriormente. El único pero es que el cable con respecto al que trae de fábrica es un poco largo pero nada que pueda crear un problema.