Eiseng Steering Wheel Cover for 3 Spokes 8th Honda Civic 2007 2008 2009 2010 2011 DIY Sew Interior Accessories 13.5-14.5 inches Stitch On Wrap Black Genuine Leather (Red Thread)

The quality of the leather is good and the red stitching is nice. My wheel was really beat up so this transformed the feel and look of the wheel. It was a pain to sew it on. I ended up just taking the wheel off the car and doing it inside my house. Would I do it again? Yes, definitely worth it if you don’t mind spending 2-3 hours on it

My Honda wheel has been flaking apart and it was time to fix it. This wheel cover is a perfect fit, but let me tell you that if you want a professional look, you need to spend about 3 hours making it look that way. If you think you'll be done in an hour, you won't have a nice looking wheel cover and probably get frustrated. You must have patience and like me, be a bit anal to making it look good. 1. It comes with double stick tape, I used some on the main parts between the spokes, no need to use it on the "tabs" 2. Get it aligned and start by tucking in the "tabs around the wheel spokes, the provided plastic tool is great 3. Unstick the double back tape and stick down the cover to the wheel, you can pull the tape up and stick back down to get it just right, it will look bumpy, but once you start sewing it, it will tighten up. 4. Sew it up, check out youtube, there are several videos that will help build your confidence to do it 5. Enjoy a great looking steering wheel

Overall I love this. I have a Si model, and was replacing the worn leather that was on the steering wheel. I took the old leather off first, and in hindsight I wish I wouldn’t have. I think the added thickness of the original leather would have helped this fit better. Not hard to do at all. I did struggle because of all the excess material. Like I said I believe that was my fault. Comes with everything you need. Take your time. Watch a few videos. I know my technique was good. And I started from the bottom. You can see that looks better, than as I got to the upper portion there was just nowhere for the material to go. Looks good tho. Better than it was. So that should tell you how bad my wheel was. Overall, I wish I wouldn’t have got this, took the red stitches out, taken a small bit off all the way around, and re stitched it then installed. That would have made up for my mess up but it’s on and I’m gonna leave it. I would recommend it. I just messed up. Edit: 10/9/25 added the third picture. Seems to be holding up pretty good.

I ordered this after watching a few YouTube videos to get an idea of the installation difficulty. I figured it was worth a shot. I used the supplied double-sided tape to line everything up as carefully as possible. Before you start stitching, make sure you've lined up the wrap perfectly with the three spokes, then tuck everything in. It will take a bit of force to get the material under the plastic, so get someone with a bit of arm-strength to help if you don't feel comfortable with that. Once everything is tucked, the rest is pretty easy. Look at youtube videos for examples, but essentially you're just going back and forth, skipping one loop every time. I threaded every loop in the "nooks and crannies" of the wheel to make it a bit tighter. One major tip I have in regards to stitching: You can do all the stitches, but don't tie off the end right away. Instead, leave the end unsecured, and start back and the beginning and pull up the thread, sort of similar to tying a shoelace. Keep pulling the extra slack up (I used the plastic tool they provided) and simultaneously use your other hand to pinch the leather together. Again, youtube is your friend here, but hopefully this makes sense. I saw someone mention a chemical smell, and I would say while there is a scent to it, it's actually quite nice. Smells like dyed leather. Almost has a new car smell, like a BMW with leather seats. All in all I'm really happy with how it came out, looks almost like it was installed in the factory.

This kit is a great replacement. To install I recommend taking your time and going slowly. Use tape on the more intricate areas so they aren't as baggy at the spokes like mine ended up being. the stitching may take the longest time and is well worth it if you go slowly. I took about 5 hours to install mine

The stitching on this is low quality and completely ripped out and made the kit useless. If I wasn’t a leather worker already and knew how to make my own stitching holes and do an alternative style of stitching I would have been screwed. I definitely DO NOT recommend this kit. Save your money and buy a better quality one.

Other than the 3-4 hours I spent sewing this onto a steering wheel, this product is great. I bought a junk wheel from a yard and disassembled it so I could see this in easily. It was still an undertaking to get this sewn on and I had every advantage possible. I would not recommend doing this to a wheel attached to the car unless you’re very flexible and skilled with a needle. Quality seems good. Time will tell in the az sun. With it installed this wheel feels brand new. Spent $80 on a junkyard wheel and the cover rather than 400+ on a brand new one. It was worth the neck pain

Not bad, there is a half inch gap in the seam and even had the leather tear at one point. To my knowledge my steering wheel is stock. Just know that there are after market options more expensive but you get the quality.

This take patience and alot of it. It took me about 3-4hours to complete but came out nearly perfect. Use plenty of double-sided tape as it helps keep the wrap in the right place. Don't pull the thread too quick as it can bunch up and screw your progress. You may have to squeeze the wrap where it meets as you pull on the thread to help close the seem. If you take your time, you'll end up with something decent and not wrinkley.

The steering wheel cover is an excellent excellent product I put one in my car it was so easy to install it was easy to sew I love it it gives the car a nice look and the weather is so nice and it's smells just as nice as a leather jacket it's an excellent product and I would recommend it to anybody if you're looking for a steering wheel cover that looks authentic like it came from the factory by the steering wheel cover it is the best it is phenomenal I can't say enough good things about it

Beautiful!