2 Inch Mattress Topper Cover, Queen – Machine Washable, Breathable, Non Slip Covering with Zipper for Mattress Topper - Cover Only, White

I don't know if it's with it for most people to basically pay double price just to get a cover for this mattress topper but I like it. I bought the twin size because I have a pull out bed /couch which are never the most comfortable. Being able to fold this up and roll it into my couches storage under it is great. I can fit a blanket, pillow, a fitted sheet and this mattress pad all in there so any guests I have over night have a quite comfortable place to sleep. Especially since my intended use case would be moving this back and forth from the couch and back to storage the sleeve is great for maintaining the quality of the topper.

Got the 3” queen cooling gel topper with cover. The topper is blue with specks. Its blue’r than photo shows. It’s a solid topper( no holes) which is what I prefer. Is medium firmness, has nice impression and recovers fast. The cover is soft and breathable, unzips on 3 sides which make it easy to get on and off to wash. Zipper is nice and works smoothly. You sink a little while still having support. That’s going to depend on how much you weight. I’m 5-8” 140lbs. And I feel hugged while on this topper. No smell on topper or cover. I have two more of these on boys twin beds. I feel the memory foam is good quality. Looking forward to less aches. It’s not a miracle topper but if it helps that will be great.

Brand new Linenspa 4" topper cover (for the Linenspa 3" mattress topper) came right on time. I bought the cover 1 inch bigger than the mattress topper at the recommendation of a previous review, and that is very true. The cover fits the topper precisely, without constricting the topper inside - check out the photos to this review. There's no excess fabric sagging from the topper after completely zipping up the outer cover - something I worried about when I ordered the larger cover size. The cover comes in nicely packaged. The fabric is nice and soft on one side, and the other side has small "beads" or spots to help keep the topper in one spot and not move around as much. Unzipping the cover had some trip ups (zipper got stuck; tips below might help you), but closing it was fine and went smoothly. Some tips when putting on the mattress topper cover: - Be slow when your first unzip the cover, because the loose threads at the lining near the zipper gets caught and causes the zipper to get stuck. (If the zipper gets stuck, try to pull out all the lining. Worked for me.) - Initially unzip enough to turn/pull the cover inside out. That way, when you unzip the rest of the cover, you can watch for and pull out loose threads that causes the zipper to get stuck. - After unzipping the whole cover, turn it to the right side out and try to get the corners of the inner topper in first. As you close and zip up the cover, the corners and body of the inner topper will ease into the outer cover (hopefully it'll work for you; thankfully it did for me). With some patience and troubleshooting (tips above might help), this cover fits the mattress topper very well. Quite pleased with how it feels and looks.

Excellent mattress topper cover for a 3" latex topper. I ordered a twin size for my MilkmenFoam custom size narrow twin 3" natural latex topper and it does the job. Very happy with it. Very good quality and I like the anti-slip on one side, very thoughtful feature, and the zipper is great to keep my topper completely enclosed. I also put a sheet over mine so that I can keep my topper and topper cover clean and free from dust and then it's easy to take my cover sheet off and wash that. Thank you so much!

My husband sleeps in a hospital bed with a hard mattress, and I bought a Linenspa mattress topper to provide him with a softer and more comfortable bed. This cover protects and preserves the mattress topper. I washed it before putting it on, and it washed and dried very well with cool water and low dryer heat. It's very form-fitting, and it took me a while to figure out how to get it on. It unzips around three sides, which makes it easier, but what you really need to keep in mind is that there are top and bottom fabrics, and the top fabric also covers the sides of the topper. The bottom fabric has little dots (silicone?) that help it stay on whatever it is on top of (in our case, the hospital bed mattress). The top fabric looks like a mattress pad. When you put the cover on the topper, pull the top fabric down over all four sides of the topper before zipping it up, and you will find that it fits perfectly.

I purchased this to pair with the 2" memory foam mattress topper by Linenspa. It fits perfectly, looks pretty nice and adds a layer of softness/protection to the item. The zipper is very small and feels a little bit flimsy and there were several loose threads around the zipper/seam, which may need to be trimmed or else they could interfere with the zipper function. That being said, I was able to enclose my mattress topper fully with no issues, and it helps it look nicer than the foam by itself. Pros: Relatively inexpensive and looks nicer than the foam topper by itself. The bottom part of the cover also has a bit of grip and helps the topper stay in place. Machine washable is a huge plus, as I like to keep my bed linens looking and smelling nice without having to find a dry cleaner. Cons: Does not have any "cooling" or temperature-controlling effects and is not waterproof against sweat/moisture that I can tell. Also, the zipper seems a little flimsy and can be a little tricky to fully secure. Some loose threads on the item, also, that can possibly interfere with the zipper function. You may need to trim those off with a small pair of scissors if you find them. Not a huge deal, but could be an indicator of quality and lead to rips/tears down the road. Overall, a fine item that doesn't break the bank.

Soy de las que le gusta acostarse en lo suave y este cubre colchon sobrepaso mis expectativas, lo amo, compre para todas las camas. 100 % recomendado

I got a 2” latex topper and didn’t want to spend $70-90 on their own cover, so opted for this product instead at less than half the price. I machine-washed it cold before use, and either this shrank it or it was just cut small because when I laid the topper on top of the unzipped cover, the cover was way smaller than the topper. In addition, the cover opens on two sides only, which I couldn’t find in the item description. A three side opening would have made the job a whole lot easier. Once unzipped, there were so many noticeably frayed fabric edges along the zipper line that I had to spend quite some time cutting them off. (There are lots of photos of this in other people’s photo reviews.) It was obvious that the manufacturer didn’t pay attention to detail. After a lot of struggle and swearing, I eventually got the topper into the cover. It isn’t a perfectly aligned fit, but it’s going under the mattress pad and fitted sheet anyway, so I can live with that. Since the topper went into a smaller cover, this firmed up the topper. The cover fabric seems to allow some stretch vertically (due to the way it’s quilted, I couldn’t feel much horizontal give), so here’s hoping that the cover conforms to the latex foam eventually. Here are some tips on how to put it on. First, lay down the open cover and place the topper on top. The manufacturer tag should be at the bottom right corner. Starting with that corner (bottom right), fit the foam into the top part of the cover (the 2” high corner part) going counter clock wise: bottom right, top right (this is the corner that’s not zipped open, so it’s a struggle and why you should deal with this corner next), top left, and then bottom left. Then start zipping from bottom right towards where the zipper ends at top left. As you zip, give the foam some waves as if you do the battle rope exercises at the gym. (You should never pull the latex as it will tear the foam.) Don’t worry that you still see the wave in the middle when you zip; the goal is to complete the zipping first. Once everything is zipped up, give the topper some more waves and eventually it will flatten out. After so many waving, my bedroom is now filled with the latex smell (the new foam smell which had dissipated way before) that won’t go away after a day. I needed some sort of protection so that the latex topper doesn’t age prematurely because it can dry out faster when exposed to light and air. For the price, I guess I got what I paid for: all the covers sold by specialty latex suppliers are way, way more expensive, but I haven’t seen similar complaints about them, so again you get what you pay for. Plus, the expensive ones often say not to machine wash since the cover can shrink; I caution you to do the same with this cover because after machine-washing mine, it was definitely a so much tighter fit.

If you decide to buy any mattress topper especially a latex topper, BUY a cover. This one was easy to zip up around my latex topper . And will be easy to clean too. Buy it! It’ll save your topper from shredding or falling apart.

It was super easy to put on, so soft. Only issues it has pilling alot, and snags easily especially if you have cats.

This cover is a perfect fit for the 2" foam mattress topper. I was very surprised to see how nicely it fit the form topper. The quality is supurb and very well made.

Correspond parfaitement à mes attentes. Qualitatif.