PTFE Teflon tubing 5ft- 2mm ID X 4mm OD for 1.75 Filament Bowden 3D Printer - PTFE Teflon Tube

Very thin but very low resistance for pulling filaments

I have a Prusa i3 MK3s with MMU2S multi-material upgrade. I replaced all of the existing 2mm inner-diameter PTFE tubing (from the spool rewinders to the MMU2S, and from the MMU2S to the extruder) with this 3mm inner-diameter tubing. Now the filament can move more freely through it, and if the end of a retracted filament happens to be somewhat swollen, it avoids the possibility of jamming inside the tubing.

I used this 4mm OD 2mm ID tube to replace the insert in my 2010 Chicago electric 151 mig welder. It works great. They don't sell the replacement inserts for this old welder anymore.

Excellent product! I use this for my filament drybox for 1.75mm line and this routes it perfectly. I run this from my drybox to my 10 line manifold and it is bendable enough to make that transition but also very strong!

I was building a drip irrigation system. I'm glad I got this. The big advantages of of having this is speed and straight cut. When you are using push to connect hoses the hose end needs to be straight. I used this on 1/4" hardline hose and 1/2" hose. Give it a squeeze and you will hear a click. Done.... Perfect straight cut every time. This made my project much easier.

I used this Teflon for cable housing for the rudder controls on a kayak. Much slicker than vinyl or Poly tubing