Phanteks (PH-ES813P_SWT) Enthoo Series Primo Aluminum ATX Ultimate Full Tower Case, Black/White

Il prodotto è arrivato integro e senza alcun tipo di ammaccatura, bollo o graffio. Unica pecca la scatola che era danneggiata, probabilmente successo durante il trasporto verso destinazione. Tale critica non viene quindi fatta nei confronti del venditore ma solamente della compagnia a cui si è appoggiata per la spedizione dello stesso. Sarebbero 5 stelle ma ne do 4 solamente per portare all'attenzione dell'azienda tale dettaglio per evitare che i suoi prodotti possano essere danneggiati durante il viaggio da terzi e quindi far perdere la qualità degli stessi.

I got the green one as the red was out of stock the quality of the case is fantastic I have watercooled the case with a 280mm monster radiator on the the bottom which is 86mm thick and a 360mm monster rad in the top they watercooling my cpu and titans in sli I also added internal lights that change colour looks fantastic and the case is near silent ,by far the best case I have had to date

The case is really really tall and quite wide even for full tower standards. The design is phenomenal. They included everything you could possibly think of and did it in a smart way. The motherboard tray is very wide and the power supply tucks in perfectly keeping your cables out of sight. There are 3 dust filters (top, bottom, front) all of which pops right out and easy to clean. The is a top compartment just for fans allowing you to mount either 140mm or 120mm fans even if you have either type of radiators. It can accommodate a 480 or 420 radiator without any modifications. The bottoms fits a 240 or 280 radiator. You need some modding and removal of the HDD cages if you want a larger radiator. The only downside is the build material is a bit on the cheap side. But with a $250 price tag, you get more than what you pay for. There might be a bit more plastic and the steel is a bit thin but thats fine with me. Its still very sturdy and you aren't beating it up anyway.

Das ist das erste Gehäuse von Phanteks und einer der besten Tower für Enthusiasten. Habe 2 R9 290 und nen FX 8350@4.7 GHZ verbaut und das alles mit WaKü. Wer sich auskennt wird wissen was für eine Abwärme diese Komponenten erzeugen. Trotzdem hat der Tower kein Problem die Hardware und 2 360 Radiatoren plus AGB zu schlucken. Alles in allem ein Top Gehäuse und Empfehlung von meiner Seite.

The build quality is top notch, and the amount of ways you can customise this case just cannot be listed. The case is aimed at people who wish to water cool their components, however don't let this put you off if like me you don't trust water near your expensive components. The idea of a liquid cooled pc means you still need lots of cool air to keep your motherboard and other components cool and this does exactly that! The included fans shift an absolute ton of air when running at full speed, however they also make a lot of noise doing this so it is worth getting a digital fan controller such as the NZXT Grid+ so that you can keep most of the fans stationary whilst the computer is at idle temps. I have done just this and the result is a silent pc unless I'm doing heavy workloads or gaming. Inside the case is a simple fan controller that takes your motherboards pwm signal and shares it between several (up to 12) other fans that can either be 3 pin or 4 pin in order to help you keep all this air flow under control. The case comes with an led strip that runs up along the right hand side of the front of the case and continue over the top and a matching led that glows dimly from within the front fans behind the mesh. These lights can be turned off at the press of a button on the top of the case. Building in the case is an absolute dream and if you have big hands like me, then you it certainly will be a breath of fresh air after building in normal sized atx cases where things can get a little cramped. There is even room for 2 PSU's should you find the need, meaning that the primary (or your only) PSU can be housed in it's own separate part of the case to keep it thermally separated from the rest of your rig. This is even better if you have a hybrid PSU where the fan only kicks in under high loads as it will keep everything cooler and as silent as possible. The only one thing I would change on this case are the hard drive racks. Whilst there is plenty of room for many hard drives, and the hard drive rack is split into two meaning it can also be customised and either all or part of it removed to give you even more choice of where to put radiators etc (you wont need to remove them for ANY graphics card as the clearance is massive even with a gtx980ti installed!) but the lack of any rubber dampening between the drive rack and the rest of the case means some vibrations can resonate ever so slightly. When I say slightly I mean if your pc is the only thing running in your room in the middle of the night then you will maybe just possibly hear it. There are some rubber grommets that hold the drives in place however this doesn't seem to quite be enough. If this part of the case was improved it really would be totally inaudible at idle. By no means is this last part a fault or even a negative. It is simply the only thing I could pick out of the case that could be improved upon. Everything else is just fantastic!! Oh, and one word of advice: You might want to build into this case not too far away from where it's going! A finished system can be between 25 and 30kg in this case :)