Single Monitor Stand Freestanding 27-43 Inch Monitor Arm Curved Screen Monitor Mount Tempered Glass Base Adjustable Motion Tilt -15° to 10° Swivel ±45° Rotation 360° Weight Capacity 77lbs HT05B-003

This is a great stand. Sturdy. All metal and glass base with little rubber legs. It holds curved 32" Samsung display, no problem. The screan can be tilted up and down, left and right, and it can also twist, so you can set your screen in landscape or portate position. You can also readily detach the screen from the stand, because the mount has hooks that simply go into the holes on the stand. So you can really move it higher or lower at any time. There are clips on the back if the stand, which hold wires hidden from top to bottom. I really like this stand, it looks minimalictic and clean, and holds pretty heavy large display. I liked it that much that I bought another one just like this one from the same company, but for 2 displays where 1 dusplay sits over the other (not side by side). I really like that one too. It's exactly the same one but has more holes in the stand and 2 mounts, instead of one. It was very easy to put together, they included LOTS of different types of screws, so you will find ones that work for your display with no problem. The mount that screws to the display has mounting holes with different distances in between, so it can hold displays with 3 different mounting hole placements. I can't think of anything negative to say about this stand. It works really good for me and I would highly recommend this mount to anyone.

Holds my 34” ultra wide monitor well - very sturdy, easy to assemble, directions are in hard to understand English but easy to figure it out on your own. Put together in about 10 mins. If you’re tall like me and you want your monitor high up on your desk at your eye level, or just want a bunch of height options, this one is great!

Pictures referenced in this review: 1) included parts list 2) included hardware list for mounting VESA plate 3) extra hardware leftover from our install 4) inadequate cable guide 5) cable routing 6) vertical support measurement, 26" from the base. This TV/monitor stand is almost perfect. The only negatives about this stand are very minor. One being the glass base, which is a dust and fingerprint magnet. This is a purely personal, cosmetic opinion, though. Functionally, the base works perfectly well. I would have preferred a different material, but wanted a stand with a lot of height adjustment, and this stand definitely fits the bill. The 2nd minor issue is the included plastic cable guides. The one at the bottom is fine, because the cables don't move around in it. The top guide, though, since they are just plastic, and only use tension to stay closed, can't hold the cables when the panel is being swiveled side to side. The cables are so thick, even leaving extra length doesn't help, and they bend the cable guide (see pictures 4 & 5) I replaced it with a regular cable tie before it broke completely. Other than those minor issues, this is a very heavy duty stand, with a lot of height adjustment, plus tilt and swivel. It was very simple to put together, and very quick. It comes with a tool for assembly, so you don't need any other tools. The hardware that holds everything together is huge, I would trust this stand to hold a much heavier panel, easily. Once the stand is assembled, and the panel mounted, the swivel feature is effortless, and has a wide range of motion. Tilt works with a thumb screw, which is simple, but strong enough to easily hold our monitor at the angle we set it. There is about 15° of tilt adjustment, up or down. Height adjustment requires removing the panel with attached VESA plate from the vertical support, by lifting up, then out, and then hooking it in the appropriate height slots. If you've routed the cables, you'll probably to readjust them after adjusting the height. Cable management is good, but not great. The rubber feet on the bottom of the base raises it up high enough to run the cables underneath it, to the vertical support, which is nice. The bottom cable guide works well, and holds the cables close to the vertical support. (See picture 5) the top cable guide, however, I had to replace with a cable tie. I am satisfied with the cable routing, though, it looks organized enough to me, even not being able to use the top cable guide. Overall, I am very happy with this purchase. This stand does what we want it to do well, which was to add a large amount of height adjustment, while keeping the tilt and swivel features of the original monitor stand. Most monitor stands advertised for a 24" monitor (what we're using) only have about 5" of height adjustment. We weren't satisfied with only 5", so I picked this one, even though it's recommended for 27" panels or larger. Our 24" monitor mounted to it just fine, though, so I'm not sure why they state 27" as the smallest panel for this stand. I would recommend this for anyone looking for an inexpensive, heavy duty stand, or for much more height adjustment than is available on most stands for smaller monitors.

This stand is nice. It is just what we were looking for & a good value for a good price. The stand went together smoothly and adjusted with no problems. Item shipped fast.

Definitely sturdy and able to handle the weight of my 36” curved monitor. However, I wasn’t expecting the stand to be that tall. If I put the monitor any higher, then it would be uncomfortable as a monitor. It is adjustable so if you like your monitor high then it will work. For the price it is definitely worth it as it is heavy duty. You can use it for monitors and a tv so it is versatile and easy to use. It took me about 20 minutes to put together as I had to make adjustment for my monitor. Over all it does what it is supposed to. Only drawback is the height of the pole.

On of my 32” 2K curved game monitors started sagging downwards. Turns out the stand that came with it was broken and could no longer keep the monitor straight, and it is well past the warranty. Ordered this one. Looks great, was easy to set up, is solid, and is very stable. Liked it so much I removed the original stand on my other monitor and replaced it with another one of these.

I bought a 27" Apple Monitor with a VESA mount that weighs a little over 11 pounds. I have just had this a day but it is working fine and is very sturdy. The apple adjustable stand was over $400 so I got the VESA mount and matched it with this stand. Previously I unsuccessfully tried a desk mount arm but there was not sufficient space on the back of my desk and one that used a spring to counterbalance the monitor weight. Unfortunately the corner of my desk only had 3/4" and was slightly rounded so the arm didn't attach properly. The spring counterbalance was only rated for 9 lbs so the 11.5 Pound Apple monitor didn't work with that either. This is simple and practical, but the main post does extend about 5 inches above the screen.

If you have an older TV similar to my 40 inch 2007 Samsung weighing 37 pounds without stand, DO NOT BUY THIS. It says it is rated for up to 77 pounds, I call BS. The main support for the TV is in 2 pieces, braced together in the back. As soon as I mounted the TV it bowed near the connection and the main support(s) did not look like it could handle the weight. This stand might work for newer light TV's, current 40 inch are around 18-22 pounds, but not for older heavier models.

En general me gusto mucho el producto. Lo que no me gusto fue que no se pudiera mover hacia arriba o hacia abajo, o inclinar hacia adelante y hacia atras una vez que la pantalla sea instalada sin la necesidad de mover nada. Cuando quiera cambiar la altura o la inclinación, tendré que mover muchos tornillos de resistencia para poder lograrlo, pero en general, el producto es perfecto, elegante y se ve bastante resistente. Sin mencionar que a pesar de ser mi primera vez instalando algo asi, no batalle en lo absoluto. Incluso agregaron una bolsa de instalación para televisiones/pantallas lo cual fue super útil porque en ningún momento se me ocurrió que ocuparía uno. Tomando en cuenta el precio, fue bastante buena mi elección.

This was the first ever monitor stand I purchased. I was nervous that it might not hold the weight of my 32 inch being free standing. But it is well made and the base is surprisingly heavy. No lose connections or anything. It holds the weight of my new 34inch monitor (pictured) with no issues! I have since bought another of these and one of the dual as well. All are sturdy and hold all 4 of my monitors with ease. I like that I have the option to flip a monitor sideways. I am a streamer. So I have my chat/ stream stuff on a flipped 32inch. You are able to spin the monitors 360degrees and can also turn them a good deal side to side to get that perfect angle. I also love that I can choose how high or low I place the monitor on the stand itself. No more crouching down to be eye level.

Ensamble perfecto, supero mis expectativas. Desventajad: unico detalle es que para modificar la algura si se debe desmontar manualmente. Ventajas: el giro horizontal vertical se realiza facilmente, estructura estable y de buena calidad, facil de armar, soporte VESA exacto.

Es muy bueno el soporte del monitor siento que esta muy grande y lo acerca mucho al usuario

Elegante sobre cualquier escritorio, fácil de armar e instalar. Soporta monitores grandes y solo le faltaría ajuste de altura inmediato para ser perfecto, pues tienes que desmontarlo para ajustarla. Por todo lo demás está muy bien