Rust-Oleum 292514 EPOXYSHIELD Premium Clear Garage Floor Coating Kit, 2.5 Car, Gloss Clear

After applying two coats of Rust-oleum (Gunmetal Gray) EpoxyShield with flakes to my 800 sq ft garage floor, I elected to add this Rust-oleum clear coat. Upon applying the gray coatings, I found that the materials went farther than what was printed on the box (i.e., 450 - 500 sq ft), so I elected to purchase just one box of the clearcoat -- and hoped I could cover the entire 800 sq ft with one application. It worked! I was able to completely coat the entire 800 sq ft without an issue. I did this in just one hour. Here's what I learned along the way: -- Break the bag as instructed for the two parts to mix well. This interesting mix procedure worked well. -- I then poured the contents into a container to further mix, and I poured half into a roller tray to do the first half of the floor (to see if half would do half). I also added the anti-skid material that was provided. -- I found that a thin amount spread far (thicker isn't necessarily better). -- I didn't bother to 'cut in' the edges with a brush, as this is a clear coat. Rolling the edges went fast. -- I then completed the first half, and followed up with the second half with ease. -- Once the entire floor was covered, I took the wet roller and rolled every square inch again to ensure I didn't miss any dry spots. The overhead lights helped reflect wet versus dry as I rolled. -- I used the spiked shoe attachments (purchased separately). BE CAREFUL these spiked platforms can slip on the wet surface. There's a learning curve -- I found it best not to shift your weight to stretch. Falling is one thing; falling into epoxy is another! -- About 28 hours after the application, it was still marginally tacky. So I've elected to wait another day to walk, and four days to drive. Last tip for those of you who haven't epoxied before ... I suggest you use two coats of colored epoxy. Wait until the second coat completely covers the floor before applying chips. Don't ever throw chips -- put a very small amount in the cup of your hand and spread it like shaking grass seed. Cover the entire floor with a very mall amount and repeat until you have a nicely-distributed look. Throwing = unintended clumps.

Tres bon résultat. Comme j’ai mis beaucoup fois plus de flocons, cela a réduit le pouvoir couvrant par 3.

Very good quality

This is a game-changer for anyone looking to enhance and protect their floors. Whether you’re upgrading a garage, basement, or workshop, this kit provides a durable and glossy clear finish that not only looks professional but also delivers long-lasting protection. The kit is user-friendly, even for those without experience in floor coatings. The instructions are clear, and the coating goes on smoothly. With proper surface preparation, the epoxy adheres perfectly, creating a seamless and even layer. The included tools make the application process even more convenient, and the low odor is a huge plus.

I purchased this product from the seller advertised in the box shown on the website, which looks like the same kit Lowe’s sells for $179.00. However, when the product arrived it was in a small brown box different than the packaging shown on the website or the description. Additionally , it states there’s enough clear coat for a two car garage. Not true. It doesn’t even come in the package shown , which states it covers 400-500 feet. My garage is 400 ft , the can of clear coat I received and covered about 300 ft, not 4-500 feet! Since, the contractor was in the middle of the job, I had to purchase a kit from Lowes so he could finish the job that cost me $184.00. When I notified Amazon and the seller I got crickets. So, disappointed. ☹️ Don’t waste your money