upHere GPU Holder,Graphics Card GPU Support Video Card Holder Bracket, Video Card Sag Holder/Holster Bracket(ARGB LED),G276ARGB

Great. Was easy to install and gave me peace of mind my graphics card was securely supported.

Got this to help support an XFX Speedster Merc 6950xt. Honestly for such a monsterous GPU, these are built pretty solid and have zero sag, I got this as a precautionary measure which I highly doubt was needed with my GPU. Looks good though with the extra RGB lighting.Looks tiny compared to my GPU but it reaches far enough in that it is definitely supporting the GPU should it ever sag. Very easy to install with the ability to piggy back off existing argb peripherals.Good value for money. Great option for those with bottom fans that can't use the cheaper telescopic stick supports.

Bought this for my RTX 2080Ti as it was starting to sag due to the weight of it. First off the logo on mine was all scrambled up for some reason but I'll just stick a Geforce RTX decal over it, the support itself is pretty sturdy though, and seems well made, at first though I wasn't sure it was going to support the card because my PC was on its side and the arm seemed to slip out of place slightly, but I can happily say once the pc was upright and the weight of the card was bearing down on it, it doesn't move at all. The ARGB lights offer a really nice bit of design to the interior and work well too.

Product looks amazing, and the RGB diffusion is even better than the £1000 MSI GPU it's supporting. Only gripe is the cable could be a tad longer so that routing round the back of the case is a little easier for motherboards with the ARGB connector in different spots.

Looks good, seems pretty sturdy and does the job. Cable length could be a little longer but other than that all good. Doesnt come with the logo shown in the photo but im glad as its much smaller! Easy to fit.

Seems well-made, looks good and is easy to install.I don't think I really needed this as my GPU is one of the smallest current-gen ones on the market and didn't appear to be sagging much, if at all. But, I must say I am pleased that I did buy it as it was cheap enough and adds a nice touch of RGB to the lower part of the case, which was otherwise pretty dark and featureless.

Very happy with this

Easy install rgb linked up with my NZXT cam software and connected to my NZXT controller perfectly as my motherboard had no pins for it anyway 10/10 purchase

تركيبه صعب والمشكلة انه ضعيف ومع الوقت يرتخي مسمار التثبيت في على الكيس والي يشيل كرت الشاشة

I bought this GPU bracket hoping to properly support my RTX 5070 in my Lian Li Lancool II case. Unfortunately, the left side where it attaches to the case is too bulky, which forces me to mount it one row lower. Doing this makes the adjustable part too short to reach the GPU, so it doesn’t really serve its purpose. I had to drill extra holes in my case to make it fit.Also, I’ve lost access to the three PCI slots below the GPU. On the bright side, it’s colorful and has lights, so it looks nice.Overall, it’s functional if you’re willing to modify your case, but the design could be much better.

After assembling my first gaming rig in quite some time, I recognized the need for additional support for my NVIDIA GeForce RTX 4060 Ti with 16GB VRAM. Installed in the top reinforced PCIe slot of my MSI MPG Z590 Gaming Plus motherboard, the GPU deserved a reliable brace to ensure its longevity and stability.Enter the "upHere 5V 3PIN Addressable RGB Graphics Card GPU Brace". This adjustable bracket is a real stress reliever for any graphics card requiring a bit of extra support. The design allows for sliding adjustments in both the X and Y planes, making it versatile enough to fit a wide range of graphics card sizes and configurations.Installation was a breeze, despite the lack of explicit instructions. The intuitive design made it easy to install, including integrating it into my existing RGB setup within my case. I appreciated the thoughtful design that allowed for tension adjustment. By slightly tensing the bracket during installation, I ensured that it would counteract gravity over time, reducing the likelihood of stress on both the GPU and the motherboard's PCIe slot.One minor caveat to note is that the screws may share space with other components, potentially affecting the seating of covers in cases designed with specific tolerances. However, this is a small trade-off for the added security and peace of mind the brace provides.In conclusion, the upHere 5V 3PIN Addressable RGB Graphics Card GPU Brace is a robust and aesthetically pleasing solution for anyone looking to secure their high-end graphics card. Its adjustable design, ease of installation, and thoughtful tensioning feature make it an excellent addition to any gaming rig.

Cumple perfectamente con su función, manteniendo la tarjeta gráfica completamente horizontal, descargando el peso de la placa base, dado el peso y tamaño de esta tarjeta.Tiene suficientes efectos lumínicos para elegir. Como m placa base es MSi, este soporte funciona perfectamente con Mystic Light, trabajando conjuntamente con otros periféricos RGB de MSi.La parte del soporte que es ajustable y toca directamente la gráfica me ha venido justo, ya que subir mas este soporte, solo un punto mas, interfería con los ventiladores ya que quedaba pegado a la tarjeta. Me ha quedado bastante bien y estoy satisfecho con la compra. Lo recomiendo. Es vistoso, pero las imágenes no le hacen justicia.

Valutazione: ⭐⭐⭐⭐⭐ (5/5)Ho avuto il piacere di provare la Scheda di Supporto upHere per GPU con LED ARGB e sono rimasto colpito dalla sua capacità di migliorare l'estetica del mio sistema, fornendo allo stesso tempo un supporto affidabile e funzionale alle schede grafiche.Design Sorprendente: La Scheda di Supporto upHere aggiunge uno strato di stile al mio setup grazie ai LED ARGB integrati. Questi LED possono essere personalizzati per creare effetti di illuminazione unici, trasformando il tuo sistema in un'opera d'arte visiva.Stabilità e Supporto: Una delle funzioni principali di questa scheda di supporto è fornire una base solida per le schede grafiche pesanti. Grazie al suo design robusto e alla struttura in acciaio, questa scheda di supporto mantiene le schede grafiche in posizione sicura e stabile.Compatibilità Universale: La Scheda di Supporto upHere è progettata per essere compatibile con una vasta gamma di schede grafiche e cabinet. Che tu possieda una scheda grafica di fascia alta o media, questa scheda di supporto sarà in grado di soddisfare le tue esigenze.Installazione Semplice: L'installazione della scheda di supporto è semplice e rapida. Le istruzioni chiare e gli accessori inclusi semplificano il processo, permettendoti di aggiungere un tocco di stile al tuo setup senza problemi.Miglioramento dell'Estetica: La combinazione di design elegante e illuminazione LED ARGB può trasformare radicalmente l'aspetto del tuo sistema. La scheda di supporto upHere non solo fornisce supporto funzionale, ma aggiunge anche un elemento visivo accattivante.Dettagli di Qualità: La costruzione robusta e i dettagli di qualità dimostrano l'attenzione che upHere ha dedicato a questa scheda di supporto. Gli LED ARGB sono luminosi e ben controllati, garantendo una resa visiva impressionante.In conclusione, la Scheda di Supporto upHere per GPU con LED ARGB è un accessorio che combina stile e funzionalità. Con il suo design robusto, illuminazione personalizzabile e facilità d'installazione, questa scheda di supporto è una scelta ideale per chiunque cerchi di migliorare l'estetica e il supporto delle schede grafiche nel proprio setup. Che tu sia un appassionato di gaming o un creatore di contenuti, questa scheda di supporto aggiunge un tocco di personalità al tuo sistema.