Turtle Wax Hybrid Solutions Pro Graphene Flex Wax - Car Wax Polish

Very easy to use. Was searching for something like this for my long awaited plan to self detail our old car which really takes the beating due harsh sunlight and dust (so much of both of them😣). More so since monsoon was here. Bought it after "Pan the Organiser" suggested and demonstrated it. Have not been able to apply to the whole car yet (got lazy in the middle😅). But have used it on the front and back glass panels, roof and front bonnet, makes the surface really shiny (depends upon the previous condition of the surface applied and the quality of the preparation done like compounding/polishing), water does show beading and sheeting. Over long run I've found that the dirt sticks very minimally to the surfaces applied. No curing time needed, can be driven just after application. Just don't wash the car within 24 hours of application. Have tried on the plastic panels as well, while it might protect them, I didn't find the gloss or trim restoration like I did with the Trim restoring coating from Meguirs. I will therefore use that only over this graphene coating. However it's great all in one coating for all surfaces alike. I don't think one should spend more in different coatings like glass coating and plastic coatings etc. Can try plastic coating if want a fresh look to the trims, but overall this product is great!!!! The price, ease of application, no curing time, no uneven surfaces, no rendering the microfibre towels useless unlike SiO2 coatings after which you have to actually throw the used microfiber towel away (seriously though what really attracted me to this graphene coating was the fact that microfiber towel cam be reused, no more throwing it away😁).

Bought this product back in April of 24 during that period it was 1499 and lemme tell it is effective till this month (Dec 2024) I have applied it twice and results are amazing but at a price of 2k I don't think it's worth it After using It has made easy work for cleaning the car as dirt or tuff stains are easily removed , if u had bought this product and don't know how to use it I would suggest that u should watch a proper tutorial on how to apply such solutions coz I did a mistake of not buffing out the solution after applying which resulted in slight hue on the front glass which irritated me during night

Works very well but application is a bit harder than the ceramic coating. Clean the car, IPA wipe, aply product, preferably with a sponge applicator, polish and buff off with a damp cloth. Lasta a long time on vertical panels not directly hit by the wind. Does not last as long on the hood (bonnet) due to wind directly hitting. Lasts a long time on glass. Also coated my interceptor 650 aluminium engine covers afert polishing. The water slides right off the engine covers. Not sure how long coating will last on the aluminium. Makes black plastic parts shinier and look shinier for longer. Use in conjunction with ceramic car wash for best results.

I needed my car to be ceramic or ceramic graphene coated but the costs of these treatments made me rethink the need for paint protection. I had some 3M Teflon wax left from earlier, so applied that but couldn't cover the entire car. I was looking for car wax on Amazon when I came across this product and saw that 19k+ people had bought it. Bought the product and then read the features & instructions 😅. To my surprise, this turned out to be the latest and the best way to protect your paint. Saw reviews on YouTube and proper application process. Got a professional detailed wash done from a professional car detailer and then applied the product myself. Did a 2nd coat after 24 hours and the shine + gloss is UNREAL. You can feel the slickness by running your fingertips on the coated and uncoated paint surface. The professional car detailer was quoting ₹10k for the ceramic coating. This product does the same job at ₹2k. Realised that I can do a maintenance application, wash, apply and rinse, whenever I see the water beading and sheeting properties depreciating. Very happy with the appearance and condition of the paint. 10/10 will recommend. Do watch "Pan the Organiser" video on application process.

Really worthy product. But not a long lasting effect. Gives very good glossiness to car paint. If You want to see the magic, have spent minimum 4-6 hrs with your car. Don't try to check the wax quality , immediately after the application. Because it needs time to settle. You can see the reflection on the doors. It's clear view. Looks better than showroom condition. Saved much more money ,then some ceramic coating ( 35-45k , depends on 3yr or 5yr pack ).

Was hesitant initially while buying the product because of diverse reviews. I’m not a pro in care care products. But this one does its job. All I did was to clean the car, spray on the surface as recommended and spread it even using a microfibre cloth, allow it to dry and then buff the surface with another clean and dry microfibre cloth. It does need some effort while buffing. All one needs to remember is that one shouldn’t over do it while spraying. Lesser the quantity sprayed, better the results. And I left the surface to cure for 24 hours. It leaves the surface glossy. As of now, I’m not sure how long it will last needing a repeat application. I expect it to be long lasting as it has graphene content. However, I recommend this product.

Yes, it's a little bit hydrophobic but can't bring gloss to painted surface. Don't go for it.

Pricey but good one. Very easy to use. Shine is average to good. Resists water beading and light drizzle. Attracts dust though. Product received is more than 1 year old. So anyone planning to purchase this, ask the seller for fresh stock. Shelf life or best use before deadline is not mentioned.

I've tried Flex Ceramic Graphene Coat, Adam's Graphene, Shine Armor. In reverse order actually. My wife bought me Shine Armor and it actually works great. Super easy application and amazing performance but durability isn't as good as Turtle Wax Graphene FLEX nor Adam's. Adam's is also easy to apply with very good durability but again, not as good as Turtle Wax FLEX. I'm on my second bottle of Flex Ceramic Graphene Coat because after you figure out how to use it, it has the best durability and it's 1/2 the cost of Adam's! Rule-#1: Use a foam applicator!! (I use this Chemical Guys applicator for $18 and although outrageously priced is worth it keeping your hands from getting covered with product. https://www.amazon.com/Chemical-Guys-ACC220-White-Applicator/dp/B01HP4C7RW). They have the same applicator without the hard handle for ~$8 and it should work just as well but will be messier. This applicator prevents wasting product and applying the exact amount to not create a chore trying to buff it out after. Rule-#2: Don't spray onto you microfiber cloth then apply or you'll waste most of the product. Rule-#3: If you're not using an applicator don't spray "extra" product on your car or you'll have a nightmare getting the excess wiped off. Just two sprays and work it onto your painted surface. Again, the applicator eliminates this issue, and it's faster to apply. Rule-#4: After testing how to apply in a small square, spray down your whole car and let it dry. Then use a clean microfiber cloth to wipe off all excess, folding over to a new clean area as soon as you see it starts to leave product. Wipe down the whole car this way. You'll use several microfiber cloths. You'll notice that a small amount of reside remains but don't worry about that because we address this in... Rule-#5: Use a spray water bottle to mist the car and buff out any remaining residue. Do this area one small area at a time, not allowing any water to evaporate or you'll leave water spots. You will feel a distinct buttery smooth surface materialize under your cloth during this step. It really is amazing. Then, for fun set something that's smooth and won't scratch on you car and watch it just glide off. It really is an amazing product to use. Rule-#6: DO USE FLEX on your windshield/windscreen. We get torrential rains and I now rarely use the high speed on my wipers. The water just sheds/sheets off. This is such an incredible safety feature being able to see the road safely during these downpours. I park my autos in the garage and with normal driving get about 6 months of great durability and then another 3 months of good protection. For the last year I just reapply every 3 months or so to keep the tough shell intact. That brings me to Rule-#7: I don't recommend using the rinse/wet application method unless you want to to burn through this product quickly. Yes, it does work but a lot of it runs off with the rinse water that's beading up on your car. Plus you burn through microfiber cloths drying and buffing your car. Plus, once I started using a high pressure air device to dry my cars this method doesn't apply. I hope these notes help.

Value for money sturdy item for your rims

Brillo magnífico, suavidad impresionante, solo que hay que batallar un poquito para que quede perfectamente homogéneo y no quede con pequeñas manchas. Ha durado una semana y sigue igual de suave y brilloso, aunque no me a tocado lluvia aun. Quitar el polvo ahora es mucho más fácil. No lo probé en vidrios, haré la prueba y de ser posible actualizaré este comentario.

I love this stuff. It’s in my car, atv, snow blower, snow shovels...everything. It is long lasting, sheds water and snow exceptionally well. It’s also easy to apply. I put it on the snow tools to see if it would prevent the wet snow from sticking to everything. It works as I hoped and it is extremely tough. I’ve only applied it once and it is still working after several snow storms. If it works this well on a snowblower with high speed snow being forced across it I’m sure it’ll hold up a long time on my car.

شركه ترتل واكس معروفه والمنتج هذا بطل واكس جيرافين