Stripe Off Wheel Adhesive Remover Eraser Wheel Removes Decals, Stripes, Vinyl, Tapes and Graphics 4” diameter x 5/8” thick 3/8-16 threaded mandrel 07498 Pack of 1

If you stripping sticker or double side 3m tape. Don't waste your time and read review. Buy this 3m wheel now!!! OMG!! Wish I know bout this years ago. I been into import cars, trucks and Etc. I always debadge all my emblems from all my cars. I love the clean look from all my car. I own a 2014 Sierra Crew Cab 4x4. So at 1st I start out using fishing line to remove my emblems. If anyone want know how do that. Just check out YouTube. It like flossing ur teeth. Any emblems comes off with ease. I used this 3m wheel after that. All the 3m tape was gone and my paint was flawless. Not even one single scratch. Amazing!!! Only problem is after all emblems is take off. There the left over 3M tapes. Doesn't matter which car or truck maker. 3M tape is quality and tuff to remove. At 1st I used my old method. A little Goo Gone and microfiber cloth. Bad idea do to black paint!! Left a lot of micro scratches. All my pass cars was white, so this Never was a problem. After doing one fender where 4x4 emblem at. I called quits and call it a night. Went home and ordered this 3m wheel. 2 days and it came home. Took the wheel and went straight to work. I have a 1700rpm delwat drill. Worked great at max drill rpm. It was perfect and fast. What took me hours in pass, now done in 30 min. I recommend using rpm that recommend. Do not go over!! This wheel work great at low rpm. Once all the 3m tape was remove. The wheel didn't made a single scratch on my black paint. I can't say enough. This wheel is magic. Best bang for my buck!!!

Had to strip the residue left after I removed my car's model emblem. This took all of 30 seconds and left NO damage to the paint. I had spent a half an hour trying to get it off with a rag and adhesive remover.

I admit, I didnt like the $38 price tag. So I ordered some cheaper ones against my better judgment. Sure, they worked, but left alot of yellowing. This 3M wheel though is awesome! I used it to clean up the areas where decals were previously removed (looks like they let the kindergarten kids do it lol) Had alot of small spots. Worked great. Used it on two decals where the paint was starting to bubble beneath it. Took the decal off and left the paint! Its softer and doesn't leave any yellowing unless you get everything hot. If you keep moving, you'll have no issues. Yes these are over 3x the cost of cheaper ones, but its 10x better. Now those cheaper ones would make more sense for taking off the majority then using these 3M to do the final touches. I've used alot of wheels and this one has to be the best. No I'm not being paid by 3M or Amazon for this review either lol It really is a great product, its just not as aggressive as some that leave the yellowing.

So I was very concerned about exactly how I was going to remove the vinyl pinstrips from a vehicle I recently purchased because the paint job on it is absolutely pristine with a finish like a mirror. I researched a ton of different methods and chose to use a heat gun and a plastic credit card like piece of smooth plastic to delicately try and remove the pin-striping. Doing 3 inches took a very long time, so I finally resorted to purchasing this 3M eraser wheel, and good thing I did. It took off the pinstripes very quickly and I was finished in 20 minutes, and there's not a mark on the paint, you can't even tell there ever were pinstripes there to begin with. As many have stated here already, the wheel gets hot even at very low rpm's, so do not hold it on one spot for long, keep it moving, then take a break after a couple of minutes and wipe down the area you just did with a paint friendly cleaning product to remove any little bit of residue, and before you know you'll have completed the whole vehicle. Also make sure to remove all dust & dirt from the area you're about to remove the pinstripes from so as not to grind it into the paint. You also only use very light pressure on this wheel to, it hardly needs any pressure whatsoever, and very low rpms. Highly recommend and worth every penny.

Pros: After spending an hour trying to manually peel off a 7yr old hood decal that previous owner purchased new with the vehicle, I decided to give this a try. I was hesitant due to the price thinking I'm wasting my money, however, I am pleased to report that this thing does exactly what it says it will. The rubber wheel grabs hold of the decal and rolls it off in little pieces leaving little to no residue and with no damage to the clear coat or finish. If you're doing small decals or pin stripes or things with small surface area, it will not take you long at all to remove them with this. If you are doing hood decals or something that covers a large area, it does still take a little bit of time though because you gotta hit every spot of the decal with the wheel (just like an eraser). However, it's much easier than peeling by hand or using a plastic knife. Cons: 1) Price. It's a bit expensive for a small rubber wheel. 2) The mount. The wheel attaches via a plastic threaded insert with no nut or washer backing and it does spin itself off the drill easily when you pause. Even just the weight of the wheel itself will spin itself off when the drill stops. It doesn't hurt anything though except your patience chasing the wheel across the driveway multiple times until you figure out how to stop the drill just right. Would have given 5 stars if not for the price.

Bought this to help remove decals on a 20 year old sea Ray bow rider. Some of the sturdier decals we were able to take off with the heat gun and they peeled off pretty well but bigger decals were too old and brittle. This product worked amazingly well in removing the decals and I was using a battery operated Sears drill that only went to 1500 RPMs but it worked fine. The battery lasted less than 15 minutes so I had to make sure I had several batteries. Very pleased but the outcome. Had a lot of success moving the drill in an up-and-down motion going from right to left

Best Buy I’ve made in a long time. Worked like a charm in getting two sides tape off my truck. No paint damage at all. Not sure I could have hurt the paint if I had tried. Keep in mind, it will wear down. Buy an extra one if you can.

This is an amazing product! With a few minutes of practice, I was able to master the technique for effective and efficient removal of the many stripes on my RV. My RV is now 14 years old, I've stored it ourside since new. Where it's parked, the stripes in the passenger side were exposed to much more sun and had dried, shrunk and cracked. We decided replace the tape graphics with paint so the first job was to strip off the tape stripes. Because the RV is fiberglass, it's particularly important to constantly move the eraser wheel back and forth across the surface to avoid building up too much heat and damaging the fiberglass. From my experience, spinning the eraser wheel slower and applying a bit more pressure was better than spinning the wheel faster with less pressure; this also helped to let the eraser get hot enough to remove the stripes without damaging the fiberglass. My RV had many stripes so striping them required a few hours of work. Once the stripe is removed, simply use acetone on a rag to clean the remaining adhesive. Don't forget to wear gloves, otherwise, the acetone will really dry out your skin. Great product that I can comfortably recommend!

Works really well on old stickers

Le produit est de bonne qualité mais malheureusement celui-ci ne fonctionne pas du tout pour enlever des bandes adhésives 3M qui sont bien collées et qui ont durée dans le temps. Par exemple, j'ai collé des bandes adhésives 3M sur des lames (bas de caisse) et celles-ci ont durée dans le temps. En essayant la meule, celle-ci enlève que dalle.

I cannot stress how effective and timesaving this 3m stripe off wheel is. Finally a tool that lives up to the description. It has removed the red vinyl reflective tape from round the rear doors of a transit van, then yellow on one side x2 lines and silver on bonnet and upper roof panel in a couple of hours using a cordless drill, started with slowest speed and just increased till it was working efficiently. No glue residue left behind just clean paintwork. Day 2 showed it will also work on Diamond Grade ECE 104 Reflective Tape and similar honeycomb reflective tape. Mine was double layered so the glue residue left behind after 3m wheel use needed softening with tar remover, the thick removed with a plastic scraper, then wiped over with a microfibre cloth and tar remover. Van is now back to stock and just needs a wash and polish. This 3m wheel is worth the cost, and it still has life in it for another job and another day.

Purchased to remove vinyl stripes on my Ford. Worked well. Take care on any plastic bumpers - it did take paint off for me but was due to my technique. No problems on the metal panels.

Had to remove decals from a shop truck I bought Started with hair drier and a plastic trim tool, softened the stickers and pealed them off carefully Set up the 3m wheel (with the adaptor attachment) on a 20v brushless drill, scuffed the bare material as per instructions and then polished off the remaining glue from the body panels. Made sure to not push too hard on it. Some residue does build up once in a while, just buff that down too. Went over the paint after with a microfibre cloth and some mild surface cleaner (I used windex multi-surface) and scrubbed the area. No trace of the old decals/glue and absolutely 0 paint damage