CerMark Ultra Laser Marking Aerosol, 2oz

Looking to improve your lasering game? Look no further than CerMark Ultra Laser Marking Aerosol! This stuff is like magic in a can, turning your dull, lifeless metal, ceramics, glass, stone, brick, and slate into beautiful works of laser art. Now, I know what you're thinking. "But can't I just use a regular old can of spray paint?" Absolutely not! CerMark Ultra is specially formulated to work with lasers, creating deep black marks at a range of power and speed settings. Plus, it won't tarnish or stain sensitive metals like brass and copper. Take that, regular old spray paint! And let's talk about the easy mixing process. Just shake the can thoroughly and voila! You're ready to start lasering away. It's so easy, even your grandma could do it. So, if you want to take your lasering game to the next level, look no further than CerMark Ultra Laser Marking Aerosol. Just don't try to use it on painted items, wood, or plastic, unless you want to end up with a hot mess on your hands.

Ok. So all the reviews I read were either "Great, exactly what I needed" OR "Stay away its no good!" There wasn't a middle ground OR anyone with actual pictures of these "works great" results. So to be clear, this product is to be used with engraving lasers it doesn't matter the brand or the wattage. Its primarily designed for metal but I used it on polyethylene water jugs. When you try to engrave resin or plastic most lasers just turn the surface white. I wanted the design to show up black on the surface of the jug so I bought this spray. When it arrived I though I got the wrong product because the aerosol can was small and only a couple of ounces, I'm sorry to say but the pictures make it look like you're getting an average sized aerosol spray can. I applied the spray to the water jug following the instructions. The spray is an opaque grey and takes about 20 - 30 seconds to dry. Every time I applied it, it only took a single pass to provide full coverage on the hobby surface. Basically it takes very little of the product to prep your product for engraving/marking. Once I worked out the exposure setting for my laser (atomstack x7 pro) these are the results I got. So I would say, it "works great", it does, its VERY expensive per ounce (hence the 3 stars on value) but it DOES do what its supposed to do.

It's crazy expensive, but it makes a much darker and more consistent mark on stainless than anything else I tried. If you're not concerned with the mark being completely black, cold galvanizing spray works pretty good, but there is concern with fumes being toxic (make sure the laser is vented to the outdoors). NOTE: i shook up my little can for literally 1-2 minutes before each use and was able to get every drop of liquid out of the can. Make sure you do that or you might run out of propellant before you run out of product. From what I understand, Cermark is actually a fine glass powder that gets burned into the oxide layer of the metal. You can feel a raised surface there. It's much more prominent than anything else I've tried (plaster of paris, graphite dry lube, cold galvinizing spray). If you want a dark, permanent mark (like 80 grit on an orbital sander for 10 minutes can't get rid of all traces of it), then probably worth it to just bite bullet and buy this stuff.

This stuff works really good. it washes away easily and makes it possible to engrave glass with a blue light laser.

Did not work at all. Tried several times, followed the simple instructions, thin even coat. I maxed out the laser, slowed it down and nothing. Had to double check the laser was working because how little impact it had on here. The laser is working fine on everything else, just will not do anything to the piece of metal with this coating on it.

On some stainless steel necklace tags, it works great, but on others (specifically colored ones), it doesn't work at all. I feel like it's a little overpriced, especially for how much you get. 2 ounces is about the size of a travel-size bottle of hair spray.

This may seem pricey but is a must have if you engrave on glasses with a laser tool. Easy to use. Sprays on evenly and you only need a little as coverage is amazing. Washes off without an issue with water . I've used on glasses and metal water bottles as well.

Works great and due to the smaller size it is offered at a better price.