Accusize Industrial Tools - 0-4'' x 0.001'' Dial Indicator with Back Lug, P900-S105

Compared to a Mitutoyo, it was spot on the same reading. Would recommend for the garage mechanic

Bueno

Not bad for the price. The bezel is extremely tight, so tight it makes it almost unusable. I found instructions in the reviews of a WEN Indicator on how to disassemble and loosen the bezel. Made a huge difference.

This indicator is made to dimensions that work with stem clamps and standard contact tips. Specifically, the stem diameter is 0.375 inches which makes it compatible with most stem clamping holding fixtures. Also, the threads for the contact tip are 4-48 which is standard size. This was not the case with the first digital indicator (another brand, returned) I bought which was under size on the stem diameter and the contact tip threads were metric. It would not work with my fixture, so be sure the indicator you buy will work in your application.

Excellent dial indicator

I needed a gauge like this on my lathe, and this works perfectly. The magnet allows me to re-position it easily, but is strong enough that it stays in place until I need to move it.

I bought this based on its reviews. Hopefully it's as accurate as it feels. I have no way to tell

It worked fine, The range is slightly more than 3", but don't think it is going to measure anything more than 20 or 30 thousandths. It is larger and heavier than my 0-1" dial indicator, but it fit in my magnetic holder just fine. It came in a cardboard box with a molded styrofoam insert. I decided that the styrofoam would not last a long time, so I made a wooden case for it.