WALI Articulating Dual Monitor Stand for 13-32 inch Screens, 22 lbs per Arm | 2 Monitor Desk Mount, Full Motion with Tilt, Swivel, Rotation, C-Clamp & Grommet Base, VESA 75/100mm (M002), Black

I use this to mount four 27" monitors, roughly 15.2 lbs each, in a corner desk setup, and it has genuinely exceeded what I expected going in. The adjustability is the standout feature. Once you loosen the nuts with the included allen wrench, the tilt, swivel, and rotation range is way more flexible than I anticipated. I was able to position each monitor exactly where I wanted, at different heights and angles, without fighting the mount at all. Once I had it dialed in, it stayed put, no drift, no sag, no slow creep back to a bad angle over time. It comes with both grommet and C-clamp mounting options, and I went with the C-clamp. Here's the one tip I'd pass on to anyone buying this: grab a cheap 2-pack of 6x12 inch anti-slip silicone pads, they run about ten dollars. Stick one on the top side that contacts your desk and one on the bottom clamp hand that bites the underside of the desk, then trim the excess with a razor blade so it looks factory. It completely eliminates any risk of the clamp crushing or marking your desktop, and the grip becomes noticeably more secure than the bare clamp alone. Small addition, huge upgrade, and it makes the whole install feel more finished. After a while of running all four monitors on this mount daily, there's been zero flex, zero sag, and zero give anywhere in the arm or the base. It's holding real weight without a single sign of strain. Honestly wish I'd bought one of these sooner instead of putting up with a lesser stand. 5 out of 5 stars. Rock solid build, excellent range of motion, and the anti-slip pad trick makes an already great mount even better.

This is impressive. I hate hardware peripherals!! But my current project requires managing multiple, simultaneous factors. This mount is easy to assemble and astoundingly stable. My bottom, outside monitors are 33", and there's enough room for another 27" between them - though, I just have a smaller one for apps like slack and teams. Vertically, another large monitor will easily hold. It's solid construction and easy design. Oh! And I have it clamp-mounted on a standup desk. The cable clips are a great help for that. Such a clean, elegant design that it inspired me to clean my desk. I thought these large monitors would droop from their weight, but they haven't at all. This mount's designers and engineers are brilliant. Easy to assemble. Does everything you hope. Easy to adjust. Really happy with it.

I bought these to tidy up my workspace and mount two 27inch monitors side by side. Overall, it’s a great product, especially for the price. The stand is sturdy, well-made, and feels secure once everything is tightened. Installation is straightforward, and the base provides good stability even with larger monitors. The arms offer a wide range of motion—tilt, swivel, and height adjustments—so getting the monitors roughly where you want them is easy. The only challenge is aligning the two monitors perfectly. It takes a bit of patience and fine-tuning, and once you get them aligned exactly how you want, don’t touch them, because even a small adjustment can throw the alignment off again. It frees up a lot of space compared to using two individual monitor stands, which is a huge bonus. For the price, it’s honestly excellent. You get a solid, functional dual-monitor setup without spending a fortune, and once it’s dialed in, it works really well.

I really like have my monitors on arms. I feel like it frees up a lot of space on the desk, it's much cleaner to look at, and allows me to have my keyboard further back on my desk (I like to rest my elbows on the desk to type). In shopping for monitor arms, I had two major things to consider: first, my monitors are mismatched sizes (30" and 27"); and second, one of my monitors is HEAVY (20.9 lbs, according to manufacturer website). This mount SAID the weight limit was 22 lbs per arm, and could hold two 27" monitors. I was a bit skeptical, but the price was really low in comparison and it looked like it might be close enough, so I went for it. When it arrived, I was immediately impressed by the shear weight of the product. I've used several monitor mounts of this style in the past, and this is by far the heaviest (which is a really good thing in this case). I love that it comes with both a grommet install kit and clamp for desk edge; both feel equally sturdy and up for the task. The stand feels well made and was easy to assemble. I really wanted a test run to see if it could hold everything where I wanted, but I really just needed to install the entire thing to find out if it was going to work. After tightening the bolt on the end of each arm as much as I dared, I placed the two monitors in their respective arms. To my surprise, it held the weight of the 30" perfectly (on a fully outstretched arm); and I was able to orient the two in a way that I'm happy. I LOVE that the kit comes with a VESA plate that screws on to each monitor (with thumb screws to make it even easier), and then the plate just slides over the receiving arm, tool free. This made my test fit and cable management easier to do. I did put the arms at the very top of the mounting pole to get the monitors ergonomically where I wanted, but they are perfect. Each pivot point has a screw with an included Allen wrench for adjustment. There is even a slot to hold each of the included Allen wrenches in one of the cable clips that you can tuck away out of sight. With two monitors, a webcam, conference call speaker, a laptop dock, and phone charging cables I have a lot of cables running down the back of the monitor arm, but with all the included cable clips (and a few velcro ties), everything is neatly tucked out of the way. Overall, great value for a solid two arm monitor mount. It exceeded my expectations.

I've used this at my desk for about two months now, and so far I've been incredibly pleased with the results! I use two monitors in my home office, and while having them on the stock included stands was functional, I found that about half of my small desk was taken up by the stands. I looked to these monitor arms for a solution, and of all the options, this brand seemed to have about the same quality for half the price. I did accept there'd certainly be something I'm giving up for the price, but I ordered it and prepped for it to come in! Assembly was a bit of a hassle, but not anywhere near as terrible as I thought. I did a grommet mount, so the worst parts for me were getting that taken care of. However, I imagine if you had a second person to help you align the top mount with the underside, it'd be a lot easier. The actual adjustability of the arms is pretty good, but I had to tighten them decently tight to not have my monitors fall. Since my monitors stay in stationary positions about 95% of the time, this is not an issue, and the rare times I do need to move them, the mount makes it easy to swivel the monitors. The build quality is also surprisingly decent, with the black metal providing great support overall. My one gripe is that the included cable management solutions aren't the greatest. You're provided with several clips that attach to the arms and base, and these clips have paths that you can feed cables through. However, I noticed these clips almost never stay in place, and replaced them with zip-ties. For me at least, when you consider the low price, this being my only issue is something I'm personally willing to overlook and forgive, maybe just offering as a suggestion for future revisions of the product. Overall, if you're in need of a dual-display monitor arm, consider this as a budget option! I've been pleased with it over the last two months, having no major issues besides the minor cable management dissatisfaction. I'd buy this again in a heartbeat, and I'm pleased to finally have some deskspace back!

Perfect solution for me and my four monitors. Setup was incredibly fast and easy. One of the best upgrades I've purchased for my stream room/office.

When reading a number of the reviews on different monitor mounts I was not sure what I was going to do as all seemed to have some sort of issue. So I saw this one and overall it looked good, so I gave one a shot and I am glad I did. First impression was that if the mount was as good as the packaging it comes in.... it will be a good mount. It was boxed inside several boxes and was as good as it gets for me-- no issues and everything in place. For this particular application I drilled a 1/2" hole through the desk and used the simplest of mounts in the kit-- a 3" round disc and a backing plate under the desk. I still laugh at the included wrench as I did use it and am glad it came with it-- they are just flat pieces of stamped steel that love to slip off and shoot across the floor. But hey, I did use it and it did shoot across the floor twice but it did work without issue! From there I installed the brackets on the monitors and then the arms on the pole.... tightened down the center allen key on the pole and installed the monitors. Once I set the height, I locked that one down and then we adjusted them where they wanted them, again made sure everything was tight. Then the monitors were leveled out retention nut on the back so the monitor cannot be accidentally knocked off and done. Total time was less than 10-minutes after drilling the hole. Fortunately in this install I had complete access to the back side, so if you were against a wall it will take a few minutes more. The end result... fantastic. The monitors are steady, level, and the amount of desk space gained is one heck of a proverbial "added bonus".... simply made the employees' day. The other good part is that the monitors are now closer to them and at the right height and angle... simply put... should have done this years ago. So I have a couple more on order (one for myself included) as to literally gain a good 2-sq.ft. of desk space with dual monitors is great. for me I will be able to set my phone in a place that I can reach it on the correct side for me (on the right) as currently there is no room and it has to reside on the left. It will also let me have places to put paperwork in progress right in front of me instead of off to the side and possibly get mixed together. Overall build quality is great. What I didn't see in the picture (that I now see of course) is attention to detail. They included not only three allen keys, but a holder that snaps onto the main post for them to be stored that also doubles as a wire holder. I am honestly impressed at that since usually then end up in a drawer and lost. Now they are cleanly tucked away, but completely available when necessary.

Disclaimer: I've only had this up for a day I work from home and have a standing desk. Previously, I had my laptop in a docking station (lenovo thinkpad) open as my primary monitor and then a secondary external monitor (HP 22cwa). I had both sitting on a flimsy metal stand. After 4 years of working like this, I decided I needed an upgrade. It was also starting to bother me that the screens were not level with each other. The husband was going to Costco and picked up a 22" Acer 23Z series monitor to go with my HP. Now I had 2-22" monitors on a flimsy metal stand. Sent a pic of the set up to my brother who sent me the link to this product. I open the box and am ready to go but lo and behold, HP doesn't include VESA setups on their monitors (which is really effing stupid when every other brand does). Instead of buying and waiting for an adapter, I sent the husband back to Costco for another Acer monitor (which has built in VESA holes, thank you very much Acer!). In about 30 minutes, we had it up and secured. I opted to use the clamp option vs. the grommet. Pros: - Instructions were super easy to follow - All parts were clearly labeled and I appreciate that the instructions included a list of all the parts so you could double-check (it's actually step 1) - Monitors clicked right in place once VESA brackets were attached - It was stiff at first but I was able to modify the angle and tilt of my monitors fairly easily - My favorite part: It comes with removable wire clips to organize the cords! I thought this was huge b/c it's not required as part of the functionality but once you have it, makes a huge impact on organization and appearance of what's going on behind the monitors. Cons: - We had one wonky bolt that wouldn't screw in all the way on one of the VESA plates but the other 3 did so I didn't think it a big deal I saved the grommet components and instructions if needed. Definitely DEFINITELY check and make sure your monitors are compatible with VESA before you order...or order a VESA adapter at the same time. I just assumed all monitors would be compatible and I was wrong (shame on you, HP!). TL; DR: Works great, easy to install. Would recommend.

Ottimo per chi ha 3 monitor e vuole una scrivania più “pulita”, semplice il montaggio, io l’ho usato per un monitor da 27” e 2 da 24” e sono riuscito a curvare un po’ i monitor laterali ma credo che con 3 da 27” sia difficile curvarli

Awesome works well holding a 27’ screen and working well for what I want

Came practically pre made! Sturdy, easy to set up, it does say to drill a hole in your desk but it is not needed. I have 3 22 inch screens landscape and they fit next to each other. The 360 swivel is very handy also. Highly recommend especially for the price.

ممتاز

ちゃんとして机PCデスクにぴったし。簡単設置、安定している。24インチDellとIiyama の１９インチ。安くっていいものです。前に出すぎていない、ぶれない。１０分、電源切らずにできました。驚くの満足。