Zoo Med Naturalistic Terrarium Waterfall Kit

This is the perfect kit. Has everything you need for your terrarium, vivarium or palidarium tanks

This is a good product if you can do your research and use logical thinking. Obviously dirt in the pump is a no go.. i created a dish of sorst usiing a rock feature. I drilled small holes so water can get in i put the hydro balls inside of the rock feature but the whole bottom layer of the vivarium was filled as a drainage layer. Lots of landscape matt will continue to help keep debris out of the pump and seperqte my drainage charcole and substrate layer.. I did drill holes to make the rock feature a water fall and an so happy with the result. Can't wait for the habitat to stabilize and to bring the crested gecko home.

The hose could have been longer. I went to a local hardware store for a longer replacement. Longer hose was not offered by Zoo Med. It could have also offered advice on how many hydroballs and what water level common sized tanks needed. Had to research other setups to get enough of that info to feel comfortable with what still was guess work. Those are my only complaints at this time. Overall happy with the product. Check out YouTube for reviews and Big Al's vid has a decent walkthrough on setup procedure.

Very happy so far. I set up over a week ago and enjoyed the set up process. After reading the clogging issues in some of the reviews, I made sure to rinse the hydroballs thoroughly. I then positioned the pump on the floor of the tank and covered the pump directly with a piece of the screen mesh which was then weighed down with a 3" layer of hydroballs. I placed a sheet of screen mesh on top of the hydroballs from wall to wall, followed a layer of sphagnum moss and finally the coconut coir substrate. I think the water movement adds a lot to the terrarium.

Took me three hours to setup and didn’t work. As soon as you put hydro balls near it no water pumps out. Awful product. Do NOT buy.

OK, so I bought this with an intent to provide a live water source for my millipedes but it stopped working after about 30 minutes but I’m gonna assume that it’s because of how deep substrate I need I need about 7 inches worth of substrate so it’s probably not working simply because of that🤷🏻

I bought this package in hopes of making a small waterfall feature for my Crested Geckos cage. I have a 18x18x18 cage and it took THREE bags of hydroballs to fill it that I had to go out and buy separately, because one did not come with this package (why, I have no idea?) 1) The pump: One out of Five stars. Honestly, the pump is not worth it. Go to an outdoor pond, pool, or specialty aquarium shop and get one. This pump is VERY loud for the amount of water it pumps (or in my case, doesn't). When I opened it up to find out why it wasn't pumping, it turns out that the prongs that propel the water through the pump were cracked and/or missing.... there was only one working prong, which wasn't enough to propel the water with enough force up the output tube. 2) The mesh: ZERO out of Five stars / Five out of Five stars. It's just mesh, so why give it such a bad review? Because I didn't get any. 5/5 if I did get some. 3) The hydroballs: ZERO out of Five stars / Three out of Five stars. Same as above. I did not get any in my package for some reason. But the bags I did purchase, about 1/4th of them were broken and the rest were EXTREMELY dirty, no matter how many times I washed them... so they get 3/5 stars. 4) The tubing: Four out of Five Stars. Would be 5/5 stars if the tubing was a little less thick, and you could at least bend it at mild angles.

Okay...this is a tricky thing to get to work. It took many trials and errors. So let me help save you a lot of frustration: 1. Pick out a piece of throw-away tupperware. 2. Cut a hole in the lid just big enough to fit the waterfall hose through. 3. Drill lots of little holes in the tupperware bowl. 4. Place waterfall motor in thd bowl and suction it to the bottom. 5. Select waterfall intensity (medium worked best for us). 6. Run tube through lid and connect it to the motor. 7. Close lid. 8. Place bowl in bottom of EMPTY terrarium where you want it. 9. Fill the bottom of the terrarium with hydroballs that have been thoroughly rinsed while holding the tupperware bowl down to the ground. Fill with hydroballs to the top of the container's edge. 10. Place screen mesh over hydroballs edge-to-edge in all directions of water feature's perimeter. 11. Add a thin layer of moss (keeps substrate from making the water merky). 12. Add substrate. 13. Add other stuff (rocks, vines, plants, etc.). 14. Add water. 15. Plug it in and watch it flow.

works great, keeps my gecko tank looking pretty and gives the geckos a nice spot to drink from

Used these for years. Great flow and very quiet. Really compact and versatile. The pipe is very ridged which can be difficult to work with if you’re trying to bend the pipe.

Für das geld bekommt man nur eine einzige Pumpe, die in der Herstellung wahrscheinlich nicht mehr als 50¢ kostet, eine kleine Tüte Blähton (andere Angebote ca. 10€ für die 20-fache (!) Menge), ein kleines Stückchen Plastiknetz, ein viel zu dicken und harten Schlauch, der noch nicht einmal auf die Pumpe passt, und einen extrem dünnwändigen 90° Ellenbogen. Das selbe Material kann man hier auf Amazon in wesentlich besserer Qualität für unter 9€ bestellen... Ich bin echt enttäuscht

Pompe hors service après 8 mois ...tout le fond de mon paludarium a refaire pour changer la pompe. Seul point positif elle ne fait pas trop de bruit une fois amorcée.

I used this to create a Waterfall within my vampire crab enclosure, it's just the pump, leca balls and pipe so you have to add to other stuff to create the look you need