AGOZ Rugged Insulin Pump Belt Case, CGM Glucose Monitor Meter Device, Inhaler Case,Belt Clip Pouch with Belt Loops,Insulin Pump Holder Cover,Minimed 780g 770g 670g 630g,Tandem Tslim X2,Freestyle Libre

Good product, great seller. Reasonably priced, free one-day shipping with Amazon Prime. After running thru four of the crappy clips issued by Medtronic for its 630 Minimed pump in a year, I bought this pouch. The pump fits perfectly (see notes below) and the sturdy metal clip fits and holds on to my belt or my waistband. I’ve had the pouch a short time, but it seems very sturdy. On the fit: you will have to take off the Minimed clip - no loss as they are weak. Also I took off the “skin” that protects the pump, because it is hard to get the pump in and out of the pouch with the plastic skin on. The only drawback to this pouch is you have to take the pump out of the pouch to see the screen and use the buttons

I use a Tandem T:flex pump, with the belt-clip type case sold by Tandem. The Tendem belt-clip case is just to protect the pump from scratches and similar hazards. I would never trustvthe belt clip in it to hold the pump on my belt. But this AGOZ case has a pretty secure metal belt clip. So far, that’s all I’ve tried out. It also has belt loops in both the horizontal and vertical direction to pass your belt through. I haven’t tried those yet. But the entire case appears to be very well constructed and I expect it to last a long time. My T:flex pump just barely fits into it so I would appreciate about another 1/4” or so in depth and width so it would be easier to get the pump out for use. As a matter of fact, the tight fit is the reason I haven’t tried the belt loops. I sometime need to take the case off of my belt to get the pump out to do a bolus. But I believe the case will be a frequent part of my pump “wardrobe”. Now I just need to find a good case to put my DexCom CGM. I now use a double case from PumpWear, Inc. That has two compartments. If AGOZ would make a double-compartment case, it would be a grand-slam home run.

I work construction and my first day with my $5,000 insulin pump (T:slim x2) I cracked my screen protector (thank goodness just the screen protector), so I decided to buy this case and it works great! It protects my screen, my pump fits nice and snug inside, it's sturdy, and it's very versatile in how you can wear is. This is a great deal for such a well made item in my opinion!

My Medtronic 670G fits in this holster, albeit seems a little snug, so I have to push the pump up from the bottom to get a grip on it to pull it out. I also had to take the silicon case off of the pump to easily get it into the holster. The metal clip is very sturdy, but slips off of my belt easily. Fortunately there is a belt loop between the case and the metal clip that I can run my belt through so it stays securely on my side. Another positive that there's enough room at the top and under the flap to tuck excess tubing into. True to its name, it is made out of heavy duty and rugged material, yet it is light weight. I am not worried about it wearing out. It would be nice if the holster had a clear plastic front (heavy duty, yet able to push device buttons) so I could see the display without removing the pump from the holster. I gave it four stars instead of five because it takes a little fumbling to get the pump out of the case. I either have to push up from the bottom or pull on the top of the reservoir/tubing to get a grip on the pump itself. Otherwise the holster meets all of my needs, is much better than the plastic clip the pump came with, and is discreet since it looks like a cellphone holster. UPDATE - After a year and a half the holster is still holding up very well and I use it daily. The pump can now be removed more easily now that the velcro has been broken in.

I find the Medtronic pump clips woefully lacking. Unmanageable, and they break easily. THIS pump holster is easy to put on a pocket, and stays there. My 780 pump fits snugly into this holster The velcro flap holds on super tight. It protects the pump (light padding) and keeps the pump accessible. Good product.

As a diabetic on an insulin pump, I wore out my belt clips that came with it. I looked for replacement and suffered from sticker shock, bad enough to send me to the emergency room. Luckily I was saved by this much cheaper product, and decided to take a risk. Here's my thoughts: - The first touch surprised me by it's thickness. Was expecting a cheap, thin walled product. It feels like a $10 product, not including shipping. - My pump fit. I measured before hand, so no surprises. - The groove on the top cover is a nice touch. (For the tubing to go though) - It has two vertical carry options, the metal belt clip or the belt loop(located behind clip on product picture). - The metal clip is just ok thickness, the loop is big enough to fit most belts. - The metal clip has a burr along the entire inner edge, need to file. For the current price, 3.98 plus 2.98 shipping, it's a steal. Even with annoying burr repair. Embarrassing update: After owning this for awhile I found out you CAN mount it horizontally. It was just hard to see. Although it's tight, so you will probably have trouble with anything more than an adult dress belt.

Very light weight, the flap closes and hold well. I do however prefer a leather belt loop over the spring steel type, because the metal clips do sometimes slip up and off your belt, and you can lose everything. Not a great choice to house expensive medical devices that you have to wear all the time, for example.

I bought this case about 2 months ago. While I purchased this case for Minimed 751 pump based on the reviews and love it for the reasons everyone else seems to have written about, I now have an additional benefit that tops my list. While walking down my steep concrete driveway this evening, I foolishly was looking at the mail from the mail box that I had just retrieved. I stumbled and fell, skidding on my right side down the driveway incline on the concrete. I realized as soon as I stopped that I was lying on top of my pump on my right hip! Concerned that I might have damaged the pump, I was relieved to find that the rugged material of this case had saved the pump from any damage despite me skidding atop it on the concrete driveway! The material received some slight abrasive damage from the concrete, but a lot less damage than the skin on my knee received since my knee hit the ground first before I rolled onto my right hip and skidded to a stop. I just ordered another of these to have on hand even though this one I just abused is still perfectly usable. Imagine if my pump had been in the regular holster from Minimed when this happened. I would have scraped the heck out of the exposed pump control face at best, and probably would have broken plastic parts everywhere. A little antibacterial cream on my skinned knee, and a bandage. Nothing for the case but praise.

Super Passform. Lediglich der Clip kann leicht aus dem Gürtel rutschen. Eine kleine Abkantung am Ende wäre da vorteilhafter.

Great product and great quality. Very tough and sturdy perfect for insulin pump users. Only negative point is the metal handle it sticks and hurts the skin. Maybe could’ve added a cloth cover on it for comfort. Other than that its excellent dosent fall off while playing sports, running.

Ideal to hold a 640g Medtronic insulin pump

Good quality

Perfect! My new pump only came with a horizontal holder which is in the way all the time. This is a much better way to keep it safe and out of the way while I work