Golf Cart Trailer Hitch with Receiver for Backseat Footrest-Club Car,EZGO,Yamaha

Works perfectly. Easy to install and well built. Holes lined up and worked great.

I reviewed a lot of hitches that appear to be the exact same hitch some were as high as $75. Best price I could find. I bought several of these and installed them. On one or two occasions I've had to elongate a hole in the bracket. A unibit is a great thing to help with the installation. But in the grand scheme of things no big deal still a nice product

Not a bad product, good for the money, first thing I would do is throw away the instructions they are useless. First of all they tell you too use a 13mm socket but you actually need a 14mm, also the pics and descriptions are blurry. Make sure you move the front angle bracket all the way forward and move the rear one as well, there is some play due to the oval holes so don’t tighten the bolts all the way. When installing the rear bolts you will have to remove the bolts that hold the rear step platform on the cart in place. Once you do that pull up on the platform and slide the bolt in the hole already on the platform, then tighten it into the welded nut on the bracket. See the pics for reference. But overall a good purchase not hard to install yourself but a extra set of hands isn’t a bad idea. Installed on a 2005 Ezgo with the rear seat platform and no helper handle.

Apart from the bolts being a little tight due to the threads being covered with black paint over spray, the instructions being pretty much useless and the nuts requiring a 14mm socket not 13mm as shown on the instructions, I found this hitch to be strong, well made, did what it said it would do, value for money and relatively easy to fit to my Club Car GC.

Installed on my Club Car Precedent Golf Cart with no modification. I wanted a hitch for pulling a small wagon that I use for hauling my large trash cans down a 360' long driveway to the curb for pick up. This fit my need perfectly.

Fit cart perfect did not have to drill any holes. Can use ball off of my truck to move small trailers

Only simple feedback is to not tighten all the bolts until you get all the bolts in place - would have saved 5 mins of the 10 mins install

Existing predrilled holes on foot rest didn’t match up. Had to remove foot rest after trying to drill new holes while still on cart. Drilled holes best I could. I’m not a machine shop and don’t have a drill press. Got mounting plates on with a little struggle as a couple holes weren’t perfectly drilled thru the tube straight. Went to mount receiver tube and of course not enough wiggle room in slots to get all bolts started and cross threaded on which snapped off and just said $&%* this and had the farmer next door weld it on. So a 30 minute job took longer than expected with frustration.