214945 Glow in The Dark Brush On Paint, Half Pint

I use this to make miniature Ouija boards to sell on ebay. I used to use the spray can version but my local Home Depot doesn't sell it anymore (and the spray can version was a lot of work)Knowing that the spray can version worked well (after several coats) I opted for the paint brush on version. I got out my sheet of paper, taped it down, and started painting. I test the glow function after every coat, but after SIX coats this stuff still wasn't glowing, AT ALL. However I did notice two TINY sand sized specs of bright glow on my paper, so I was very confused. I hopped onto the reviews to see what others were saying (I didn't read them before purchasing like I usually do...) Anyway, SO MANY bad reviews. After reading through them I figured out my problem... STIR, DON'T SHAKE!I had been shaking the can like I would do with regular paint, if it looked good and mixed I thought it was good. I ended up using half a can before I figured out I should try stirring it... I got out a set of Panda Express chop sticks from my drawer and started to stir, immediately I felt the resistance at the bottom of the can, a hard clump of substance (the stuff that makes this glow). I stirred and stirred til it was smooth, THEN I put the lid on and shook the can for good measure... VOILA! It works now! (you still need a few coats tho, I will try using Rustoleum primer on my next batch like the can recommends to see if that helps)So STIR, DON'T SHAKE! (Well, shaking after you stir is obviously fine...)

Didn't glow at all. Not even a little bit. Zero glow.

Quality pant. The color is great, glows really well after getting some light. Easy to use and spreads nice and evenly. It stays nicely, permanent paint. Wipes clean of all dust and dirt. Doesn't fade or scratch easily. Great price. Great quality.

Product glowed fine once I figured out that all the glow in the dark was stuck to the inside of the can. And I mean stuck. It took a lot of force with a stir stick to get all of it unstuck from the entire inside of the can. Stir very thoroughly. Once you get it unstuck from the can, stir a lot to homogonize it. Then put the cap back on and shake it a bunch. It might work to throw some half inch or so steel spheres (ball bearings?) into the can to help break up the glow clumps but not until one has unstuck the glow from the inside of the can. I did multiple coats and used more than half the can to coat about three square feet (.25 square meters) Had I known about the stuck glow part, i probably could have coated more area. Like the song says, I'm stuck like glow... The manufacturer should probably use a non-stick coated can for this product.Once I had a finished product, I found the product was nicely activated by ultraviolet - either a 'blue' laser cat toy from amazon or a 'black' light. once activated, shining a red laser at it will make it temporarily blow more brightly then darken. Works best if the laser is powerful or the red laser cat toy is moved slowly. One can either write on it with the blue laser or activate the whole surface and write on it with a red laser... A room full of college students each with a red, green or blue cat toy were entertained for a few minutes... Brightness of its glow drops off pretty quickly but possibly still visibly glowing hours later? Didn't watch it that long.

Jury is out on this one. I need to use it more.

Paint went on milky, though it wasn't going to work but after a day or so it went on very clear, note don't use paint brush, use a 4" paint roller to apply, this will avoid stricking.

Ok, so this might be the coolest stuff ever. I didn't come up with the idea, but I decided to try it out. If you want a demo, youtube "glow in the dark paint laser pointer". I bought this Glow in the Dark Paint, and a Ultra Violet Laser Pointer 10 mW for about 15 bucks at Amazon as well (Search for B002EAVZ94). I took the paint, painted a large white piece of paper, put it in a large frame and what I got was magic! Turn off the lights and point the laser pointer at it, and it will retain the image for seconds, allowing you to draw images with light.For around 30 bucks this is quite possibly the coolest project in that price range I've ever done. It is impressive to show your friends and kids (make sure to supervise children with lasers!). Buy some of this paint already, and that Ultra Violer Laser Pointer!

I painted this on items and it didn't do anything 🙃 so sad, I won't try again.

Really gd

doesn't glow

لا يعمل رغم وضعي اياه تحت أشعة LED

A very good product. I used it for paining the regular golf balls to glow in the dark. It worked very well.

does not glow at all ..