Espresso Machine Head Gasket Group Brew Seal For Cuisinart EM-100 EM100 EM-200 EM200 Espresso Machines

It fits perfect! I got my pressure back and I’m not wasting anymore espresso coffee nice an foaming!

The media could not be loaded.  Straight out of package, this seal is crumbling. Not made of flexible good quality rubber. Went to replace my seal to find out my so called "new seal" is junk.

Perfect fit!

It is much stiffer and a little thicker than the original rubber seal in my Cuisinart EM-100. This prevented the portafilter ears from entering their locking groves. I found a solution in installing washers between the lock assembly and machine body to allow the grooves to align with the ears.So I'm glad this part was available and got my machine running again but it was not a straight drop-in replacement.I hope this helps others if they have the same problem i did.UPDATE -The last seal lasted about 6 months before it couldn't hold pressure on fine grinds. First, I removed the washers I had mentioned above, and that got the portafilter on tight enoiugh for a few more weeks of use, but the gasekt eventually stopped sealing even though it looked fine.So I ordered and received a new gasket overnight - Thanks again to Amazon and the manufacturer for having it available for us folks keeping our Cuisinarts alive - and like before, the portafilter would not install because the new gasket is too stiff and tall. So this time, instead of shimming the group head out with washers, I simply filed a small 45-ish degree angle into the bottom, leading edges of the three portafilter ears, and that gives the ears enough room to get the locking-turn started.I attached a picture of filed ear of my portafilter. My portafilter is upside down in the picture but has the bottom cut out for use with a non-pressurized basket.Have fun!

Unfortunately this did not fit my Cuisinart EM-100. It did not provide a good seal, and water came out of the sides. I had to return.

This fit good but make sure you understand how it's supposed to e attached before removing your old one. I didnt and end up installing it backwards until I figured out I was doing it wrong.

Buen producto, tamaño a la medida. Recomendado.

Hi, at first it was a little stiff. But after heating up the coffee machine and just letting hot water warming up the ring à few times it did the trick. I'm very satisfied with the head gasket. Thank you