Frankford Arsenal Quick-N-EZ Impact Bullet Puller - Stuck Case Remover for Ammo Reloading with Interchangeable Collets

Goid bullet puller. Easy to use and works every time.

Well made.

This puller works great for what its intended for, unloading your reloads on which you made a mistake. I tried pulling the bullet from a factory crimped .224 round. After 20 minutes of banging and pissing off my wife the bullet had pulled out about 2mm from the case and stopped there. That said, it's pretty easy to use. Setup could have been easier if they had shipped the collets preassembled with the o-ring around them. It's a bit of a pain to get the o-ring around the collets as trying to hold three tiny pieces of metal while stretching an o-ring over them takes some decent dexterity. It also helps keep the pieces together. You can't see it from the picture but without the o-rings you have 12 tiny pieces of metal floating around once you open the package. It would be nice if there was a convenient place on the tool to store them, like in the handle. I suppose if you wanted to leave the collets unassembled you could drop them back into the hammer when not in use, but then you have to sort through all the tiny pieces to find the ones you need and reassemble them every time you want to use it. It may sound like a lot of complaints. They're more minor inconveniences. Those inconveniences aside this tool operates as designed and easily pulls non-factory crimped bullets.

It took two tries to get a complete hammer set (the first set was missing several pieces) but with all the pieces, the set is excellent. The design hasn't changed much if at all over the last 50 years. That includes how it's used. I see reviews with complaints of how bad the set works. But some of those complaints include pictures showing the reviewer using the hammer with the ammo inserted backwards! This set also comes with very clear, easy to understand instructions. They just need to be read if you don't already know how to use an impact bullet puller. I haven't tried using this particular puller with shell holders yet. But several older impact hammers were able to use shell holders in place of the collets. My 50 year old hammer worked perfectly with shell holders. I just need to find where that puller has been hiding...

The Frankford Arsenal Quick-N-EZ Case Tumbler and Media Separator is a game-changer for brass cleaning and polishing. It works flawlessly and makes the process quick and efficient. Removing cases and separating media is simple, and it really helps fix mistakes and keep everything organized. Solid build quality and great performance highly recommend for any reloader!

First let me say I have a collet bullet remover and I use it too; only thing is there is often a minor amount of damage to some (not all) kinds of bullets with the collet remover no matter which collet I use. Not so with this one; they all come out unscathed. The thing I like most about this bullet puller is not pulling bullets. Instead I keep a supply of wooden dowels cut to the O.A.L. of the cartridge I am loading + .030" so when I press one too deep I insert the proper dowel and give it a whack. Now I am ready to back off the seater die and reseat the bullet with no spilled powder and no prep to reinsert the bullet. In all fairness I should note that I always (and I mean aways) do a separate step for seating and crimping. The concept is very simple; instead of pulling the bullet and making a mess, the impact puller only drives it down to O.A.L + .030". I too went through the hassle of broken o-rings, but eventually found a source in the auto supply. Now I have learned from another reviewer you can use the shell holder for the case you are loading in the impact puller without hassling with the o-rings. I am not sure about this 2x4 end grain thing. To be frank, I whack mine on my vice and it works better that way than any other (especially wooden surfaces) I have found. Will it ever completely replace my collet puller? No. However it has a permanent place in my reloading processes. Definitely recommended. A fine tool.

This tool is a must for all reloaders. Especially if you're fixing one or rounds that you have messed up on. This particular model works just okay, I am not impressed with it. You must hit the hammer, VERY HARD on concrete to make the bullet move AT ALL. You must also pause between each hit to tighten the cap holding the bullet in. The first time I used it, I put a .223 round into the the collet and placed it into the hammer, then I would whack it against my work bench, which is made of wood, and nothing would happen. I would pause between every 3 or 4 hammer smacks to measure the bullet with a calipers to see if I had made any progress. I hadn't. I never did get that one out. Another time, I had seated the bullet too deep in a different .223 round. I used the bullet puller to try and get it to come out some. I did get it to work after VERY VERY hard and fast smacking. The "face" of the hammer had deformed some, and I had to use concrete even though the directions tell you not you. I did get the bullet to come out a little bit and ended up being exactly how long my other rounds were, so I left it. I cannot over state how hard you will have to use this thing. It felt like I was going to break it. For more than 2 or 3 bullets that need to be pulled, I would go with a collect clamp bullet remover than screws into the press. I think that'll be my next bullet puller purchase. Bottom line: it does work, but you'll need to wail on it for any results. Good luck.

Easy to use can take the shock of use on steel with no damage to hammer.

Snappat bra och billigt

Après quelques mois d utilisations et bien nickel pas de jeu,moi s cher que dans les armurerie.

After some research of bullet pullers and realizing I don't use them very often I thought id settle on price instead of quality. I was wrong. This thing is well made and works flawlessly. It has 3 collets to use for different sizes of cases and is constructed of good material. Instructions are vague but you tube has an easy video on it and anybody who has been reloading for a short time or all their life can use this product with ease. Great product!

Herramienta muy buena y de buena calidad, cumple con la expectativas, que tiene la marca. Es muy resistente a los impactos lo utilizo golpeándolo contra un taco de madera y no tiene ni una marca. Viene con los anillos para varios calibres, por poner algo negativo no viene muy bien explicado que anillo corresponde a cada calibre, por lo demás muy contento. lo dicho recomendaría este producto

Funziona bene, intuitivo nel funzionamento e va bene, anche se qualche cartuccia dura, richiede più colpi. Aggiornamento: dopo 7 anni e qualche lavoro anche gravoso, si è rotto.