Full Face Respirator Mask Activated Carbon Respirator Masks for Organic Vapor 4pcs Filter Cartridges

I use this for airsofting and as a standby in case I ever need a full face respirator if the brown stuff hits the fan. My glasses fit well underneath, however the seal isn't perfect so if I needed it in a real situation I'd probably wrap something around the arms to finish the seal. It's not difficult to breath through even when running around for 3-4 hours in full kit and almost never steams up unless you're hot, stop, and your breathing calms before you cool off, you feel like you have to breath a little harder at first but quickly get used to it and the feeling disappears unless you're really pushing it with one filter on and the other hole sealed up with tape. My filters did not arrive with any cotton or covers. The visor can take a 340FPS plastic BB at point blank range without even a scuff, there's no damage to any of the mask after being hit in the face with BBs repeatedly during 2 games so far which speaks of the quality to price ratio. The straps to tighten it and latches to release it can be a bit fiddly to locate when you're in a rush, mask on, and have combat gloves on but not too hard most of the time. It can be difficult to sight a long-gun due to the visor and/or filters, but that's my problem and it outside it's intended use case (I'm just going to put the sight on a riser, and I have started to just remove the right filter and totally sealed it with a few layers of tape which makes it slightly easier, and it's still not hard to breath through). This £55~ mask I bought as a standby useful tool and specific costume item has actually replaced my £300~ goggle and mask setup for most of my matches now, and sits with the not-just-for-airsoft kit alongside my medical kit and a few other items that could come in useful in unexpected circumstances. I have not tested it with any actual chemical vapors, etc! However smoke from pyrotechnic grenades, other players farts, and hoards of sweaty manballs fighting around me cannot penetrate it noticably even with the minor seal breakage due to my glasses arms.

Mask itself suits my needs perfectly. It is a good fit (small female) and comfortable to wear as it is very lightweight. I didn't risk using the filters that came with it, because even though they look similar to the genuine 3M ones, the writing on them wasn't in English so it was not possible to be sure that they were the correct ones to filter out the vapour from epoxy resin. They may be perfectly fine but I couldn't take the risk as I am horribly allergic to the fumes and it takes me weeks to recover if I'm exposed. I knew this before I ordered so it was not an issue for me. 3M filters fit perfectly.

I got this to use as a dust filter for cutting MDF and working with loft insulation etc at home, and it appears to be fine for DIY use. It can be used with glasses but the arms do break the seal so it is not fully air-tight - although for normal use, the seal round the mouth and nose part of the mask is not affected. So again, probably ok for dust but maybe not so good for gas. It comes with a handy dandy little protective bag - but unfortunately it doesn't fit in the bag with the filters attached! The instructions are a bit of a joke - as bad as they were even before the days of google translate. For example: ..... 'the mask default factory direct (that is, the filter element cartridge and do not use the airway) interface, the need to install the airway when the need to replace both sides of the interface and plug the other interface and ensure its airtight'. Contrary to one of the answers above, the instructions explicitly state that the 'Filter cartridge can NOT be cleaned'

Absolute brilliant bit of kit. It is made of really quality materials and the seal is airtight, just what is needed in the current climate. I looked like a right tool when I had one of those rubbish blue masks on as I knew they were absolutely useless against the Coro-Noro. However, this has helped protect me breathing in other people’s dirty breath and airwaves. People in supermarkets are absolutely horrendous at socially distancing and this mask has helped keep people well away from me so it’s a thumbs up from me.

I am very happy with this mask. After spending ages searching for the right gas mask , I found this one. I bought it in case of a emergency. You never know what is going on in this world 🌍 especially since the Coronavirus started and everyone expecting a second lockdown. The world is changing folks and we have to change with it. I believe that everyone should have one ( Just in case ) I also purchased extra filters. Even though I hope I will not need to wear it, it’s still better to be safe than sorry. Very cool looking gas mask and very comfortable and the seller is very helpful. Must buy .

Bloody amazing product. People said it's not good for people who wear specs, well i have specs myself and if you wear normal glasses i.e. slim glasses they fit fine. I have rectangular glasses and they fit fine. I tried a pair of aviators on and put the mask on and they was a little bit tight but that should give you an idea. I have no issues with the mask at all great look great size great performance and no fogging. Definitely worth the money and would recommend to anyone. The only gripe I have is the fasteners for the bottom clasp is stiff but I have no doubts that after some use they will ease up... would Definitely buy more and recommend to anyone.

The actual mask looks good and has enough straps to securely seal around your face. Two new filters were supplied and I was looking forward to using it. Unfortunately mine had a scratch on the lens so I had to return. Unfortunately there wasn’t an option for a replacement to be sent out instead of just being refunded.

This will be my seconded one, in 2 years. Great mask easy to adjust and fit on.

Ottimo!! Mi serviva una maschera con la certificazione e finalmente l'ho trovata senza spendere un patrimonio. Ho testato la maschera facendo la sanificazione di un ambiente di 40m2 e devo dire che mi sono trovato benissimo. Si sente che arriva aria pulita e che i filtri fanno bene il proprio lavoro. Molto comoda la retina dietro che prende la forma della testa. Ottima qualità prezzo!!

Este respirador facial es muy ligero y fácil de llevar, no se cae y la lente es resistente al impacto y ofrece mucho rango de visión. Muy versátil, tanto para trabajos de pintura, soldadura y subterráneos o cimientos sanitarios permite trabajar con comodidad y seguridad preveniendo las nocivas consecuencias de los gases o vapores. Con ella puesta puedes comunicarte sin problemas y la silicona de calidad con la que está fabricada te garantiza durabilidad y protección. Necesaria para evitar vapores nocivos y trabajar con garantías.

Top qualite

Da wir aktuell mitten in der Sanierung sind und doch einiges an Staub aufwirbeln, habe ich diese Maske bestellt. Kam schnell an (Amazon eben) und nach dem Auspacken roch sie etwas nach Gummi, was aber denke ich mal recht normal ist. Nach ein paar Stunden draußen war der Geruch aber komplett verflogen und ich hab die Maske anprobiert. Passt super und ist auch vielfältig einstellbar. Die Filterwirkung wird auch sehr gut erreicht, habe es mit einer Flasche Harz für den 3D Drucker getestet und mit Maske konnte ich absolut nichts riechen. Auch auf der Baustelle hat sich die Maske als sehr nützlich erwiesen. Beim Runterreißen der Decke kam einiges an Putz, Stroh und Lehm runter. Mit der Maske absolut kein Problem. Auch nach knapp 2 Stunden war die Maske immer noch bequem und hat kein bisschen Beschlagen. Verständigung mit der Maske klappt auch super, da im Mundstück scheinbar eine Art "Verstärker" eingebaut ist. Hört sich an wie ein dünnes Metallplättchen, was die Stimme etwas verstärkt. Mein Vater war so begeistert, dass wir für ihn auch direkt noch eine bestellt haben. Die Filter haben den normalen Anschluss, so dass auch Ersatzfilter von z.B. 3M verwendet werden können.

Habe die Maske jetzt mehrfach im professionellen Einsatz bei Rohinstallationen gehabt. Für den Anwendungsfall Baustaub ist sie wirklich mega. Alle halten einen für blöd, weil man solch eine Maske trägt, nach der Arbeit lacht man aber über alle anderen. ^^ Sie bietet vorrangig den Staubschutz beim Atmen und zudem halt noch den Augenschutz, dank der Vollmaskierung. Passform am Gesicht ist super und auch, wenn man richtig schwitzt, beschlägt das Visier nie. (Was für mich wichtig war) Ich bin langer Vollbart-Träger (14cm) und das dichtet sie wirklich super ab. Klar, nach dem Tragen kann man die Bartfrisur natürlich vergessen, aber in der Hinsicht ist die Dichtigkeit wichtiger. Schweiß ist auch kein Problem. Schweiß tropft z.B. eher von Innen gegen die Scheibe und läuft nach unten ab. Dank der Belüftung ist die Scheibe niemals beschlagen, auch, wenn man wirklich schwitzt wie Sau. ^^ Einzig die Haltbarkeit des Visieres ist nicht wirklich toll. Es gibt ganz schnell Kratzer. Das ist blöd, aber ist verschmerzbar. Wahrscheinlich sind die Kratzer rauspolierbar, habe ich allerdings noch nicht probiert. Die mitgelieferten Filter halten bisher noch durch. (Jetzt 2 Monate bei ca. 6 Einsätzen) Einmal durchblasen und gut ist. Falls sie wirklich mal zugesetzt sind, sind sie leicht zu ersetzen. Es passen auch Filter von 3M an die Maske, was gut ist, denn die Filter von 3M sind mega. Tipp: Die Maske kann man, natürlich ohne Filter, problemlos in der Spülmaschine reinigen. Klingt ungewöhnlich, aber funktioniert super. :) Definitiv ne Kaufempfehlung von mir. :)