Berryman Products 1301 Tire Seal-R Sealing Compound,1-Gallon Bottle

My neighbor had an unused 20yo BF Goodrich tire no presence of dry rot … so yeah why not try use it? Filled to factory spec & sprayed soapy water on the bead seal area and valve stem everything seemed good. Let the tire sit overnight and it had sadly lost 12PSI. Did soapy water again & put it in kitty pool I catch antifreeze in ~ hmmm no bubbles? I searched Google/YouTube for several hours looking for a good product and was surprised to see that Berryman made tire sealant!? I’ve used the B12 fuel cleaner for years didn’t know they made anything else. Lots of manufacturers of tire sealant out there ~ however ~ Berryman’s had no bad reviews. Blah blah blah used 14oz on the old but unused P225/70R16 tire mounted on a SUV and it has not leaked! I have no affiliation with whatever company Berryman is and I only submit reviews for stuff that works hoping it helps out other regular folks searching for a good product. Again this worked for my one particular situation I can not speak for all the claims on the label but I am 100% happy with the results I got. *** Things to Note *** This comes with a plastic valve core removal tool which I did not use because I have a metal core remover. I would not recommend using the plastic one / if you don’t have a real core tool borrow your neighbors … if you are lucky enough to get the core out without wrecking the plastic tool you probably will trying to snug down on the valve core when reinstalling and then your left with a flat tire and will be unable to finish the steps of the Sealant product. *** Also *** the fist jug I got came without a pump as advertised and the hose was severely kinked from the way it was packaged for shipping. I contacted AMAZON requesting just a pump and hose but I got the whole thing! The second jug came inside a large ziplock bag along with the hose and pump. If you order this product and it was shipped without the big ziplock make sure you have the hose/pump/core tool. I was very impressed with the customer service during my complaint call and very happy getting full replacement! I had enough product to add to three more full set of vehicle tires including the spare (3x5= 15 treated tires). If I ever get a nail puncture I will update if this product self healed the leak as described on the label. Great product & Great Customer Service!

Wow. What an amazing product. I have a piece of land that is covered in these miserable seeds people call goat heads. One pass with my yard tractor and I picked up several. A couple days later I had 2 flat tires and one slow leak in the third. I bought this after seeing many reviews saying to stay away from "the green stuff". Day 1 - I followed the directions (see tips below) and after inflating the first tire I still heard the leak for about 10-15 seconds then it went silent. Cool, I though, but we'll see if they hold. Day 2, 3 - Still holding. Day 4 - Back to the field to mow and haul rocks with my wagon. A couple passes and I spot a nasty goat head embeded deep in my back tire. Nervously I pulled it out ... hiss for about 4 seconds then silence. COOL! Day 5 - The next day I went over the tractor tires and pulled out all the goat head thorns. It would have been half a dozen leaks, but the tire sealer sealed them. Day 7 - I'm walking by my wagon, grr 2 flats. The goat heads got my brand new wagon tires. I broke out the Berryman's and pumped some in. Again it worked perfectly. I though, hey my dolly always gets flats, so I pumped some Berryman's in those tires as well. Day 14 - All 10 tires are still fully inflated Tips: 1. When you receive the product in the mail, before doing anything, put it in a garbage bag and go outside to unscrew the pump / open the jug. Because of the design of the pump, there will be some of the juice that will spray out and it makes a mess. No problem cleaning up, but it's still messy. 2. When you pump the juice in your tire, make sure the valve stem is at 5 or 7 oclock. You will rotate the tire later, but when you fill you want it to fill near the bottom of the tire. 3. If you have a tube tire, gently hold the valve stem with pliers while you attach the fill hose. Oh yeah, Berryman's works great on tubes as well. 4. MOST IMPORTANT. Put a paper towel around the valve stem when you are taking off the fill hose. There will be a little displaced air in there now, so some juice will squirt out, so having a paper towel rapped around the stem keeps things nice and clean. 5. After putting the juice in your tires, SLOWLY rotate the tires. This keeps the juice on the outside of the tire instead of getting it all over the rims. Quantities I used in my tires: Lawn tractor / larger riding lawn mowers Front tires - 8 pumps Back tires - 12 pumps Wagon tires - 6 pumps Dolley tires - 6 pumps

Excellent!! Berryman's tire stop leak fixed my nagging slow tire leak. I was getting tired of adding air every time I rode my motorcycle. The tire is as big as a car tire; I couldn't find anything causing a leak; I even replaced the valve stem thinking it might be letting air out but it wasn't. Berryman's did a great job - I put the recommended amount into the tire, aired it up, rotated the tire as recommended to make sure Berryman's got spread around inside the tire; and it's held the correct pressure ever since then. I'm also going to use it on my hand truck dolly tires and wheelbarrow tire which always need some air when I infrequently use them. I'm sold! I recommend Berryman's to solve tire leaks.

Great product. Purchased a bigger bottle!

Fast shipping. Been using Berryman tire sealant for years with great results.

Great product! Sealed up some pretty leaky tires I had been fighting with for a while!

Where has this stuff been all my life??!! I’ve been doing things wrong (by changing inner tubes and replacing tires). This stuff saved me from replacing all 4 wheels (tires, inner tubes, rims) on my hose reel that has pneumatic tires. Assembly is a bit awkward - you are supposed to put the little clear plastic piece onto the white pump end, then attach the included hose to the plastic piece, and put the hose over the valve stem (minus its core valve). Just have some paper towels available to wipe up any of the mess that you might leave behind as this stuff makes a bit of a mess in-between removing the hose end off of the valve stem and getting the remaining product still left in the hose back into the bottle. So don’t say I didn’t warn you. I started putting this into other things that have pneumatic wheels (go cart, bikes, balls with bladders) that were constantly going flat over time and didn’t want to continue swapping out failing rubber pieces. This stuff either sealed it up completely by rotating the object per instructions to circulate the product, or was on its way to stopping the leak. Don’t forget to wipe the bottle pump for next time so things don’t accidentally get clogged up.

works good . would use it again --used in large tire still holding

Used this on a set of passenger car tires (mid-sized SUV). Cheap winter tires and rims that the dealership sold us with our new car 8 years ago. Car was always kept in a warm garage and heated parking, but when left outside on occasion, the tires would leak a little air. Not a big deal initially, but as we live in Canada and get some really cold weather, it became an ongoing issue. Over time, the tires lost more air and couldn't even be in the cold long enough to run a small errand before deflating significantly. Various tire shops charged us various amounts to check for leaks; none were ever found. Purchased this and some new valve cores as a last resort before buying new tires. Fully expected the tires to go way out of balance and not be usable on the highway. To my surprise, no balance issues and the tires have held air so far this winter - even leaving the vehicle outside on purpose in cold weather to determine if the tires are still losing air. Very satisfied and this is probably the most cost-effective spend on vehicle repairs I have ever experienced! Berryman saved us from buying a new set of winter tires!

Enough in jug to do 4 large atv tires. Easy to put into tires and easy measure with pump on the jug. A bit messy if you spill some . Put in my tires early fall and tires still up into cold December temps. Time will tell.

I knocked off one star (wished there was a 1/2 star option) as I cannot comment on how long it will work and I found the pump to be messy. I added this product to aged and leaky pressure washer tires and moving dolly tires a few days ago and they are maintaining pressure. I even noticed a little leakage of the product around a tire bead which indicates where the air was escaping previously. Next job is to add to my ATV tires. Will give me added piece of mind while out in the bush. As mentioned above, it is easy to use and appears to work very well.

The instructions were clear and easy to follow. Adding the product to my ATV's wheels was straightforward and took about 30-45 mins total to: deflate the tire, remove the valves, add the product, replace the valve, then fill the tire (repeat for 4 tires), then go on a ride to ensure proper distribution. I did this about 3 weeks ago and so far, the product works as intended. I would purchase it again.

Used it on my car which had a very slow puncture that I wasn't able to find. After pouring the stuff in the tire (very easily done by the way) and rolling a little bit it didn't seem to be working but after I went for a real ride of about 35km the puncture was sealed! There are a lot of dirt road around my home and it is regular to have slow puncture so I'll be using it preventively on all four tires. There is enough stuff in the gallon for 2 sets of 4 tires if not more depending of the tire size.