WEN JT630H 10-Amp 6-Inch Spiral Benchtop Jointer

WEN products are quickly becoming my go-to for quality affordable woodworking tools. This newer Spiral Head version is absolutely amazing! Setup was very easy and I was jointing lumber less than 15 minutes after taking it out of the box. As stated in the instructions, the work surface is coated with a thick layer of oil, which will need to be removed and replaced with a good paste wax. As advertised, the cuts are extremely smooth, accurate, and fast. Also, the amount of noise the machine makes is much less than other jointers/planners I've used and the dust collector seems to work quite well at removing dust/chips from the bottom and the amount of chips thrown from the top of the machine seem to be very minimal... so still a good idea to use appropriate hearing/eye protection. Another bonus with this type of jointer is the way the individual blades can be quickly replaced. Each blade has 2 sharp edges and are adjusted with the included hex tool. The majority of the work I do is with thinner lumber, so having the ability to only switch-out the dull blades (closest to the fence) is a nice touch! Great product for the weekend woodworking warrior or part-time craftsman. Highly recommended!

This WEN jointer is a solid choice for beginners entering the market. While it operates at a standard noise level for planers, the build quality surpasses expectations, pleasantly surprising users. The dust collection system stands out for its effectiveness, keeping the workspace clean. With a 6" size limitation, it may not handle large projects, but excels in precision for items within that range, delivering excellent square cuts. Its compact design is a perfect fit for small workshops with limited space, ensuring that every tool has its place without overcrowding. Whether you're tackling DIY projects or small woodworking tasks, this jointer offers reliable performance and impressive results.

A spiral head cutter for under $300?!?! I figured it was worth the risk to check it out and I am very satisfied. While the infeed and outfeed tables are only aluminum, they do not flex under usage. The cutter head leaves very clean surfaces on maple and purpleheart (both are prone to tear-out, but the jointer did a great job). As per instructions, I would recommend only taking 1/32" passes at a time. The motor does not hesitate at that depth nor did it hesitate on a 1/16" test pass, but I would not cut that deep in actual use. The tables were also almost perfectly level, requiring only raising the back, far corner by a 32nd or so. (Plenty of videos on how to level the tables are available.) The fence is the weakest link. While not hard, it takes a bit of work to get it square and true to the table. Make sure you have a good try-square to set it and double check it on the outfeed and infeed tables before every use. That would be the one change I would like to see. Also, a few screws were a little loose out of the package, but that's a common occurrence with many benchtop tools. Pros: Price Lightweight. Great for a small shop like mine Clean cuts in hardwood like maple Comes with set up tools and safety pushers The tables are well machined and flat Motor is powerful enough Almost ready out of the box. Only took ~2 hours to level and true the tables and fence, and set up for perfect square cuts. Cons: Fence setup is a little tricky to make sure it's true No onboard tool storage Both of these are very minor issues. In summary, if you take the time to give this jointer a little out-of-the-box TLC, you have a fantastic light-duty machine. I have mostly run maple and poplar through it with no issues and I definitely have no regrets buying it.

It's a great little machine, and it works very well.

Just got my JT630H Jointer. Set up was a snap. I don't know why people were having problems with the fence set up. The two orange levers are spring loaded and can be repositioned to tighten down the bracket holding the fence and keep out of each other's way. After a few minutes the fence was straight to the table and 90 degrees to the table. It seems very solid and should stay aligned. My shop vac hose is slightly big for the supplied dust port so I will need an adapter. I wish they could standardize these dimensions, so you didn't have to buy another part to make it work. Ran a 1"x4" oak about 2' long that had been cut from a larger board on a table saw through this jointer. It removed all saw marks on the face and edge and left a very smooth perfect 90-degree face/edge. For doing work on boards up to 6" wide x up to 4' long this would be great choice at this price. If you watch any videos on set up of this jointer, don't pay too much attention to the one where he puts the fence on upside down. I give this 5 stars.

For a sub $300 jointer this is pretty impressive. Packaging is very good. After some basic assembly of the fence parts I cleaned the grease off the tables with mineral spirits. After that I used a straight edge to check if the infeed and outfeed tables were coplaner and they were perfect. Next step was to make sure the outfeed table was adjusted to the top of the blades and again, it was set perfectly. The 90 degree stop on the fence was also spot on. Some of the reviews on YouTube said the depth adjustment scale was off a bit but, just like the rest of the jointer, it was set exactly where it should be (it’s a very simple adjustment to make if necessary). Lastly, I jointed the edge of some cherry boards I had for a project and the results were excellent. If you don’t have the space or budget for a stationary jointer, you can’t go wrong with this one. The only thing to note with this (or any jointer with a 30 inch long table) is that you’re limited to jointing boards that are about 4 feet in length. Much longer than that and you most likely won’t get a straight edge.

Fonctionne très bien, facile d’utilisation et surtout portatif. Seul lacune, la surface est en aluminium et se graphing facilement, mais je recommande.

Firstly face and edge the timber to make a table to stand it on, perfect

الجهاز ممتاز ولكن يجب الانتباه ان التيار 110 فولت وليس 220 فولت .. مما اضطرني ان اغير احد المقابس الى تيار 110

Aún no la pongo a prueba pero trajo todo y vino bien empacada si la probé y trabajo muy bien

This is a very good DIY planer but the Amazon Australia sales site does not warn you that voltage is 110 and and your require a $90 2000W Step down Transformer. There is a short note in small writing advising buyers to check voltage but is easy to see. A banner next to product description that is easy identifiable should be visible for all non 24V products.